Pitsco Foam Wing Glider Pack Bedienungsanleitung

Foam Wing Glider Pack

Materials Included:

1/8" balsa wood sheets

1/16" balsa wood sheets

1" polystyrene foam

Sandpaper

HD Bond II

Modeling clay

Plane Art Decals

Template material

Graph paper

Equipment Needed:

Foam Wing Cutter (17080)

Foam Wing Glider Instructions:

1. Using the Linder wing pattern, make a template to use with the Foam Wing Cutter. Refer to your Foam

Wing Cutter User Guide for cutting a wing.

2. You will need to cut two wings approximately 9"long.

3. Sand or cut the ends of both wings (make sure you cut opposite ends) to form a dihedral angle for the

wings. With one wing ﬂat, the other wing should be elevated approximately 2-1/4".

4. When you are satisﬁed with the angles, glue the two wing sections together.

5. Using the patterns provided, mark and cut the fuselage, tailpiece, horizontal stabilizer, and wing

support from the 1/8"balsa wood sheet.

6. Glue the tailpiece to the fuselage. Glue the wing supports to the fuselage and tailpiece as shown in the

following ﬁgure.

7. Using the pattern provided, mark and cut the vertical stabilizer from the 1/16"balsa wood sheet.

2-1/4''

9''

8. Attach horizontal and vertical stabilizers to the tailpiece as shown in the following ﬁgure.

9. Attach the wings to the fuselage with the wing centered over the wing support as shown in the

previous ﬁgure.

10. When the glued areas have dried, experiment with diﬀerent amounts of clay on the nose cone to

balance the weight of your glider. The following tips will help you ﬁne-tune your glider.

Tips:

1. Reinforce the trailing edge of the wing with masking tape. This will prevent the edge from chipping.

2. Coating the wings with a water-based wood ﬁnish will strengthen the wings.

3. The stabilizers can be made with foam, which will reduce the weight of your glider.

4. Rounding the leading edges of the balsa wood with sandpaper will enhance the glider’s performance.

Foam Wing Glider Patterns

Horizontal Stabilizer

Vertical Stabilizer

Linder Wing

Fuselage

Tailpiece

Wing Support

Inhaltsverzeichnis

Andere pitsco Spielzeug Handbücher

pitsco

pitsco Trebuchet Bedienungsanleitung

pitsco

pitsco LSRAV Dragster Kit Bedienungsanleitung

pitsco

pitsco BFF Bedienungsanleitung

pitsco

pitsco Pulling Tractor Bedienungsanleitung

pitsco

pitsco 41427 Bedienungsanleitung

pitsco

pitsco Prop Racer System Bedienungsanleitung

pitsco

pitsco TETRIX MAX Gripper Kit Bedienungsanleitung

pitsco

pitsco EZ Build Bedienungsanleitung

pitsco

pitsco Mag Sailer Car Bedienungsanleitung

pitsco

pitsco AP Dragster Launcher Bedienungsanleitung

pitsco

pitsco Wind Gen Bedienungsanleitung

pitsco

pitsco SunEzoon Bedienungsanleitung

pitsco

pitsco Sled Pull Challenge Kit Bedienungsanleitung

pitsco

pitsco Clearly Solar Car Bedienungsanleitung

Beliebte Spielzeug Handbücher anderer Marken

marklin

marklin 37321 Bedienungsanleitung

Canon

Canon PAPER CRAFT Bedienungsanleitung

GREAT PLANES

GREAT PLANES Pitts M-12S Bedienungsanleitung

NOCH

NOCH 14261 Bedienungsanleitung

Hausler

Hausler 450 SE V2 Bedienungsanleitung

Dynaflite

Dynaflite Daydream Bedienungsanleitung

Kenner

Kenner Batman 63651 Bedienungsanleitung

LEGO

LEGO 8527 Bedienungsanleitung

Multiplex

Multiplex EasyStar II Bedienungsanleitung

iKarus

iKarus ECO 8 Bedienungsanleitung

Walkera

Walkera 38 Bedienungsanleitung

Hasbro

Hasbro TRANSFORMERS BUMBLEBEE Bedienungsanleitung

MD MXION SWD Bedienungsanleitung

Mattel

Mattel Disney Pixar Cars Cozy Cone Spiral Rampway Bedienungsanleitung

marklin

marklin 39671 Bedienungsanleitung

LEGO

LEGO TECHNIC 8735 Bedienungsanleitung

Mattel

Mattel HOTWHEELS DWL04 Bedienungsanleitung

REVELL

REVELL Bristol Beaufighter TF.X Bedienungsanleitung

pitsco Foam Wing Glider Pack Bedienungsanleitung

Beliebte Spielzeug Handbücher anderer Marken