Pittsburgh 63714 Montageanleitung

63714

Visit our website at: http://www.harborfreight.com

Email our technical support at: [email protected]

6" Long Reach Digital Caliper

Owner’s Manual & Safety Instructions

Save This Manual Keep this manual for the safety warnings and precautions, assembly,

operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back

of the manual (or month and year of purchase if product has no number). Keep this manual and the receipt

in a safe and dry place for future reference. 24a

When unpacking, make sure that the product is intact

and undamaged. If any parts are missing or broken,

please call 1-888-866-5797 as soon as possible.

No portion of this manual or any artwork contained herein may be reproduced in

any shape or form without the express written consent of Harbor Freight Tools.

Diagrams within this manual may not be drawn proportionally. Due to continuing

improvements, actual product may differ slightly from the product described herein.

Tools required for assembly and service may not be included.

Read this material before using this product.

Failure to do so can result in serious injury.

SAVE THIS MANUAL.

Owner’s Manual & Safety Instructions

Save This Manual

operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back

Page 2 For technical questions, please call 1-888-866-5797. 63714

Specifications

Display Units Inches & Millimeters

Accuracy +-0.001″ (0.03mm)

Display 0.0005″ (0.01mm)

Battery 1.5V, LR44 (Qty2)

Page 3For technical questions, please call 1-888-866-5797.63714

IMPORTANT SAFETY INFORMATION

1. Wear ANSI-approved

safety goggles during use.

2. Keep work area clean and well lit.

3. Do not operate when tired or

when under the influence of

alcohol, drugs or medication.

4. Use as intended only.

5. Inspect before every use; do not use

if parts are loose or damaged.

6. Maintain product labels and nameplates.

These carry important safety information.

If unreadable or missing, contact

Harbor Freight Tools for a replacement.

Page 4 For technical questions, please call 1-888-866-5797. 63714

Button/Coin Battery Safety

WARNING

• INGESTION HAZARD: This product contains

a button cell or coin battery.

• DEATH or serious injury can occur if ingested.

• A swallowed button cell or coin battery can cause

Internal Chemical Burns in as little as 2 hours.

• KEEP new and used batteries OUT OF REACH OF CHILDREN

• Seek immediate medical attention if a battery is suspected

to be swallowed or inserted inside any part of the body.

Page 5For technical questions, please call 1-888-866-5797.63714

Button/Coin Battery Safety

This symbol means:

INGESTION HAZARD: This product

contains a button cell or coin battery.

1. Remove and immediately recycle or

dispose of used batteries according to

local regulations and keep away from

children. Do NOT dispose of batteries

in household trash or incinerate.

2. Even used batteries may cause

severe injury or death.

3. Call a local poison control center

for treatment information.

4. Non-rechargeable batteries

are not to be recharged.

5. Do not force discharge, recharge,

disassemble, heat above 158°F or

incinerate. Doing so may result in

injury due to venting, leakage or

explosion resulting in chemical burns.

6. Ensure the batteries are installed

correctly according to polarity (+ and -).

7. Do not mix old and new batteries,

different brands or types of batteries,

such as alkaline, carbon-zinc,

or rechargeable batteries.

8. Remove and immediately recycle or

dispose of batteries from equipment

not used for an extended period of

time according to local regulations.

9. Always completely secure the battery

compartment. If the battery compartment

does not close securely, stop using

the product, remove the batteries,

and keep them away from children.

Page 6 For technical questions, please call 1-888-866-5797. 63714

Operating Instructions

Note: Before first use, remove pull

tab from battery compartment.

1. Push the OFF ON button

to turn caliper on.

2. To toggle measurement between inches

and millimeters, press mm/inch button.

3. With jaws closed, press ZERO

to set readout to 0.

4. To measure an object, set the bottom

prongs outside object being measured.

Slide the jaws together until they

gently contact the item.

5. When finished, press OFF ON

button to turn off Caliper.

Page 7For technical questions, please call 1-888-866-5797.63714

Maintenance

Battery Replacement

1. Remove screw(s) and open

battery compartment.

2. Remove battery and dispose of properly.

3. Insert new battery in correct

polarity, close battery compartment

and replace screw(s).

Record Product’s Serial Number Here:

Note: If product has no serial number, record month and year of purchase instead.

Note: Replacement parts are not available for this item. Refer to UPC 193175508560.

Limited 90 Day Warranty

Harbor Freight Tools Co. makes every effort to assure that its products meet high quality

and durability standards, and warrants to the original purchaser that this product is free

from defects in materials and workmanship for the period of 90 days from the date of

purchase. This warranty does not apply to damage due directly or indirectly, to misuse,

abuse, negligence or accidents, repairs or alterations outside our facilities, criminal

activity, improper installation, normal wear and tear, or to lack of maintenance. We

shall in no event be liable for death, injuries to persons or property, or for incidental,

contingent, special or consequential damages arising from the use of our product.

Some states do not allow the exclusion or limitation of incidental or consequential

damages, so the above limitation of exclusion may not apply to you. THIS WARRANTY

IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED,

INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS.

To take advantage of this warranty, the product or part must be returned to us

with transportation charges prepaid. Proof of purchase date and an explanation

of the complaint must accompany the merchandise. If our inspection verifies

the defect, we will either repair or replace the product at our election or we may

elect to refund the purchase price if we cannot readily and quickly provide you

with a replacement. We will return repaired products at our expense, but if we

determine there is no defect, or that the defect resulted from causes not within the

scope of our warranty, then you must bear the cost of returning the product.

This warranty gives you specific legal rights and you may also

have other rights which vary from state to state.

26677 Agoura Road • Calabasas, CA 91302 • 1-888-866-5797

Inhaltsverzeichnis

Andere Pittsburgh Messgerät Handbücher

Pittsburgh

Pittsburgh 63712 Montageanleitung

Pittsburgh

Pittsburgh 63714 Montageanleitung

Pittsburgh

Pittsburgh 63615 Montageanleitung

Pittsburgh

Pittsburgh 63731 Montageanleitung

Pittsburgh

Pittsburgh 63586 Montageanleitung

Pittsburgh

Pittsburgh 63731 Montageanleitung

Pittsburgh

Pittsburgh 63711 Montageanleitung

Pittsburgh

Pittsburgh 63656 Bedienungsanleitung

Pittsburgh

Pittsburgh Pittsburgh Laser Range Finder Bedienungsanleitung

Pittsburgh

Pittsburgh 67801 Bedienungsanleitung

Pittsburgh

Pittsburgh 63613 Montageanleitung

Pittsburgh

Pittsburgh 64202 Montageanleitung

Pittsburgh

Pittsburgh 63730 Montageanleitung

Pittsburgh

Pittsburgh 93294 Kurzanleitung

Pittsburgh

Pittsburgh 58231 Montageanleitung

Pittsburgh

Pittsburgh 95701 Bedienungsanleitung

Pittsburgh

Pittsburgh 63647 Montageanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

Keysight

Keysight M8290A Bedienungsanleitung

Acterna

Acterna MS1400 Bedienungsanleitung

R&S

R&S ZPH Bedienungsanleitung

Datacolor

Datacolor ColorReader DC10-2 Bedienungsanleitung