Planet POE-100 Bedienungsanleitung
Copyright
Copyright (C) 2004 PLANET Technology Corp. All rights
reserved.
The products and programs described in this User’s
Manual are licensed products of PLANET Technology,
This User’s Manual contains proprietary information
protected by copyright, and this User’s Manual and all
accompanying hardware, software, and documentation
are copyrighted.
No part of this User’s Manual may be copied, photo-
copied, reproduced, translated, or reduced to any elec-
tronic medium or machine-readable form by any means
by electronic or mechanical. Including photocopying,
recording, or information storage and retrieval systems,
for any purpose other than the purchaser’s personal
use, and without the prior express written permission of
PLANET Technology.
Disclaimer
PLANET Technology does not warrant that the hardware
will work properly in all environments and applications,
and makes no warranty and representation, either
implied or expressed, with respect to the quality, per-
formance, merchantability, or tness for a particular
purpose.
PLANET has made every effort to ensure that this User’s
Manual is accurate; PLANET disclaims liability for any
inaccuracies or omissions that may have occurred.
Information in this User’s Manual is subject to change
without notice and does not represent a commitment on
the part of PLANET. PLANET assumes no responsibility
for any inaccuracies that may be contained in this User’s
Manual. PLANET makes no commitment to update or
keep current the information in this User’s Manual, and
reserves the right to make improvements to this User’s
Manual and/or to the products described in this User’s
Manual, at any time without notice.
If you nd information in this manual that is incorrect,
misleading, or incomplete, we would appreciate your
comments and suggestions.
CE mark Warning
The is a class A device, In a domestic environment, this
product may cause radio interference, in which case the
user may be required to take adequate measures.
Trademarks
The PLANET logo is a trademark of PLANET Technology.
This documentation may refer to numerous hardware
and software products by their trade names. In most, if
not all cases, these designations are claimed as trade-
marks or registered trademarks by their respective
companies.
Revision
User’s Manual for PLANET Power over Ethernet
Adapter:
Model: POE-100, POE-100S, POE-100SK
Rev: 2.0 (August 2004)
Part No. 2010-000016-101
Table of Contents
Chapter 1 Introduction 1
Chapter 2 Package Contents 3
Chapter 3 Features & Specifications 5
3.1 Features 5
3.2 Technical Specification 5
3.3 Product Outlook 6
Chapter 4 Hardware Installation 7
4.1 Prior installation 7
4.2 POE-100 – the injector installation 8
4.3 POE-100S – the splitter installation 9
Appendix A RJ-45 pin assignment and cable system 11
A.1 Pin assignment 11
A.2 Cable system 12
Appendix B Frequently Asked Question 13
1
Chapter 1
Introduction
Thank you for purchasing our Power over Ethernet Adapter. This
user's manual is to provide the installation and usage of this
adapter for network installers and users.
PLANET's PoE products include two models: Injector and Splitter.
Injector inserts current into the unused wires in a standard
network cable (pin: 4, 5, 7, 8). So the cable between Injector and
Splitter can transfer power and network signals simultaneously.
Base on the limitation of cable on Ethernet and Fast Ethernet, the
maximum distance between the two devices including Injector
and Splitter can reach 100 meters.
2
3
This page is intentionally left blank
2
3
Chapter 2
Package Contents
Your Power over Ethernet Device contains the following in the
package:
Model: POE-100SK
• Power over Ethernet Injector (POE-100) x 1
• Power over Ethernet Splitter (POE-100S) x 1
• Power Adapter x 1
• User’s Manual x 1
• Reminder Paster x 1
• Straight 15cm UTP cable x 1
• DC plug cable x 3
Model: POE-100
• Power over Ethernet Injector (POE-100) x 1
• Power Adapter x 1
• User’s Manual x 1
• Reminder Paster x 1
Model: POE-100S
• Power over Ethernet Splitter (POE-100S) x 1
• User’s Manual x 1
• Straight 15cm UTP cable x 1
• DC plug cable x 3
Please consult your local dealer if any of the parts is missed.
4
5
This page is intentionally left blank
4
5
Chapter 3
Features & Specifications
3.1 Features
• Provides low-voltage DC power over existing Category 5
cabling to a device with an Ethernet port
• Distance up to 100 meters
• Protects devices from possible damages due to power-
surges
• Three different output voltage options (5V/2A, 7.5V/
1.5A, 12V/1A) to fit various devices
• Work with EIA568, category 5, 4-pair cable for 10Base-T
or 100Base-TX, Ethernet / Fast Ethernet network
3.2 Technical Specication
Ethernet connector 2 x RJ-45
POE-100: Ethernet,
Ethernet+ DC out
POE-100S: Ethernet,
Ethernet + DC out
Ethernet data rate 10/100Mbps
Power usage of Category 5
pin assignment
(Ethernet + DC)
-: Pin 4, 5
+: Pin 7, 8
Input voltage, current POE-100: 15VDC, 1A min.
Output voltage, current POE-100S:
DC 5V, 2A
DC 7.5V, 1.5A
DC 12V, 1A
6
7
DIP Switch POE-100S: 1 for DC voltage
selection
LED indication 1 power LED indicator
Number of Ethernet devices
can be powered
1
Ethernet data cable TIA/EIA-568, Category 5
cable
Dimensions (L x W x H) 64.5mm x 42.3mm x
20.4mm
Operating
environment
Temperature 0~50 degree C
Humidity 5~95%(non-condensing)
3.3 Product Outlook
Figure 1: POE-100
Figure 2: POE-100S
6
7
Chapter 4
Hardware Installation
4.1 Prior installation
Before your installation, it is recommended to check your network
environment. If there is problem for you to install a networked
device where it is very difcult to nd a power socket for your
AC-DC Adapter, POE-100 and POE-100S should provide you a
way to provide DC power for this Ethernet Device conveniently
and easily.
The POE-100 comes with an AC-DC adapter with 15VDC output
and injects this DC power into the un-used pin of the twisted pair
cable (pair 4,5 and pair 7,8).
Caution:
1. Power over Ethernet (POE-100 and POE-
100S) will only work under Category 5
UTP/STP cable with 4-pair. Please refer to
appendix A for more.
2. Gigabit Ethernet device cannot be used to
work with POE-100 and POE-100S since
1000Base-T will use the 4-pair for data
transmission. Plug in Gigabit device to POE-
100 with power could damage the device.
The POE-100S separates the power out and will provide three kind
of power output, in different voltage and current, i.e. 5VDC/ 2A,
7.5VDC/1.5A and 12VDC/1A.
Dieses Handbuch passt für folgende Modelle
2
Inhaltsverzeichnis
Andere Planet Adapter Handbücher
Planet
Planet WNL-U553 Bedienungsanleitung
Planet
Planet DMA-100W Bedienungsanleitung
Planet
Planet WL-8314 Bedienungsanleitung
Planet
Planet ATA-150 Series Bedienerhandbuch
Planet
Planet ENW-3502-FC Bedienungsanleitung
Planet
Planet WNL-U553 Bedienungsanleitung
Planet
Planet WNL-U556M Bedienungsanleitung
Planet
Planet WireFree WL-2400 Bedienungsanleitung
Planet
Planet WNL-U555HA Bedienungsanleitung
Planet
Planet POE-161 Bedienungsanleitung
Planet
Planet ENW-9801 Bedienungsanleitung
Planet
Planet VIP-156 Bedienungsanleitung
Planet
Planet ENW-9801 Bedienungsanleitung
Planet
Planet VIP-161W Bedienungsanleitung
Planet
Planet VIP-156 Bedienungsanleitung
Planet
Planet BT-510U Bedienungsanleitung
Planet
Planet 802.11g Wireless USB Adapter WLU-356L Bedienungsanleitung
Planet
Planet POE-150 Bedienungsanleitung
Planet
Planet VIP-156 Bedienungsanleitung
Planet
Planet VPA-100 Bedienungsanleitung
