Planet VIP-156 Bedienungsanleitung
Table of Contents
English:
Preparation before beginning administration on SIP Analog
Telephone Adapter ............................................................. 1-3
Voice communication samples........................................... 1-10
Further Conguration ....................................................... 1-15
Português:
Preparativos antes de começar a administração do SIP ATA... 2-2
Exemplos de conexões de voz ............................................ 2-8
Mais Congurações .......................................................... 2-11
Russian:
Подготовка к первому подключению ................................. 3-3
Настройка голосовой связи ............................................. 3-10
Дополнительная конфигурация ...................................... 3-13
Español:
Preparaciones previas a la administración del Adaptador de
Teléfono Analógico SIP ....................................................... 4-2
Ejemplos de comunicación de voz ....................................... 4-8
Conguración adicional..................................................... 4-11
Polish:
Przygotowanie do zarządzania adapterem ATA...................... 5-3
Przykłady realizacji połączeń głosowych ............................... 5-9
Dalsza konguracja.......................................................... 5-12
VIP-156/VIP-157
SIP Analog Telephone Adapter
Quick Start Guide
English
1-1
Overview
This quick installation guide describes the objectives,
organization and basic installation of PLANET VIP-156/VIP-
157 VoIP Phone Adapter (also named as “ATA” in short), and
explains how to establish your rst voice over IP communication
via PLANET product. Also, this guide shows you how to nd
additional information on related products and services.
The related models are shown below:
VIP-156: SIP Analog Telephone Adapter
VIP-156PE: 802.3af PoE SIP Analog Telephone Adapter
VIP-157: 1 FXS/1 FXO SIP Analog Telephone Adapter
VIP-157S: 2-port FXS SIP Analog Telephone Adapter
The VIP-156/VIP-157 ATA series comes with a web-based
graphical user interface that can cover most congurations and
machine status monitoring. Via standard web browser, you can
congure and check machine status from anywhere around the
world.
1-2
Objectives
This guide provides physical installation, network congurations,
and Internet access establishment information for the ATA.
Organization
This guide is organized as follows:
• Preparation before beginning VIP-156/VIP-157 administration
• Administration interface
• Network interface quick congurations
• Internet access setup guide
1-3
Preparation before beginning administration
on SIP Analog Telephone Adapter
Physical Interfaces
1PC
RJ45 connector, to maintain the existing network
structure, is connected directly to the PC
through straight Cat5 cable.
2LAN
RJ45 connector, for Internet access, is connected
directly to Switch/Hub through straight Cat5
cable.
312V DC 12V DC power
Note
1. Use proper AC adapter for the ATA; improper
power supply will damage device permanently.
2. For VIP-156PE, please connect IEEE 802.3af
standard compliant power injector to the LAN
interface for power resource. At the same time,
either PoE or AC adapter can be deployed at
one time.
Administration Interface
The ATA provides GUI (Web based, Graphical User Interface)
for machine management and keypad administration is also
available for simple conguration.
Web conguration access:
To start ATA web conguration, you must have one of these web
browsers installed on computer for management:
• Microsoft Internet Explorer 4.01 or higher with Java support.
1-4
Default IP address of ATA is 192.168.0.1. Please execute web
browser, and insert http://192.168.0.1 in the address bar of
your web browser to log on to the ATA web conguration page.
VIP-156/VIP-157 will prompt for logon username/password;
please enter: root/null (no password) to continue machine
administration.
Note
In order to connect machine for administration,
please locate your PC in the same network
segment (192.168.0.x) of the ATA. If you’re
not familiar with TCP/IP, please refer to the
related chapter of the user’s manual or consult
your network administrator for proper network
configurations.
1-5
Network Interface quick congurations
Execute your web browser, and insert the IP address (default:
192.168.0.1) of VIP in the adddress bar. After logging on to
machine with username/password (default: root/no password),
browse “Network” “Network settings” conguration menu:
Parameter Description
IP address LAN IP address of the
ATA
Default:
192.168.0.1
Mask LAN mask of the ATA Default:
255.255.255.0
Default Gateway Gateway of the ATA Default:
192.168.0.254
DNS The Domain Name
Server IP address
Default:
168.95.192.1
1-6
Connection Type Data required.
Fixed IP The ISP will assign IP address, and
related information.
DHCP Client Under most circumstances, there’s no
need to congure the DHCP settings.
PPPoE The ISP will assign PPPoE username /
password for Internet access.
After conrming the modication you’ve done, please click
on the Submit button to apply settings and browse “Save
& Reboot” menu to reboot machine to make the settings
effective.
Save Change to Flash Memory
Most of the modications on ATA will take effective after
modications, but they are just temporarily stored on RAM only.
They will disappear after your reboot or power off the VoIP
Phone Adapter. To save the parameters into Flash ROM and let
them take effective forever, please remember to press the Save
& Reboot button after you have modied the parameters.
Keypad Congurations
The ATA series supports telephone keypad congurations. Please
connect analog telephone set and refer to the following table for
machine network congurations.
1-7
Menu
Choice
Machine
Operation Parameter(s) Remarks:
#111# Set DHCP
Client None ATA will change
to DHCP Client
#112xxx*
xxx*xxx*
xxx#
Set up
Static IP
Address
Use the * key
when entering
a decimal point.
DHCP will be
disabled and
system will
change to the
Static IP type.
#113xxx*
xxx*xxx*
xxx#
Set Network
Mask
Use the * key
when entering
a decimal point.
Must set Static
IP rst.
#114xxx*
xxx*xxx*
xxx#
Set Gateway
IP Address
Use the * key
when entering
a decimal point.
Must set Static
IP rst.
#115xxx*
xxx*xxx*
xxx#
Set Primary
DNS Server
Use the * key
when entering
a decimal point.
Must set Static
IP rst.
#136# Enable Auto-
cong mode None For PLANET IPX-
2000 IP PBX
#137#
Disable
Auto-cong
mode
None For PLANET IPX-
2000 IP PBX
#190# Unlock None
Must unlock the
protect function
before setting up
network settings
via keypad.
1-8
#191# Lock None
The system will
be locked and
can’t set up
network settings
via keypad.
#195# Reboot None
The system
will reboot
automatically.
#198# Factory
Reset None
The system
will be reset to
factory default
value and reboot
automatically.
0* To switch
PSTN mode None VIP-157 only
The following keypad commands can be used to display the
network settings enabled on ATA via voice prompt.
Andere Handbücher für VIP-156
6
Dieses Handbuch passt für folgende Modelle
3
Inhaltsverzeichnis
Sprachen:
Andere Planet Adapter Handbücher
Planet
Planet WL-U356 Bedienungsanleitung
Planet
Planet ENW-9606 Bedienungsanleitung
Planet
Planet ENW-9801 Bedienungsanleitung
Planet
Planet ENW-980X Series Bedienungsanleitung
Planet
Planet WL-3565 Bedienungsanleitung
Planet
Planet VPA-100 Bedienungsanleitung
Planet
Planet VIP-161W Bedienungsanleitung
Planet
Planet WireFree WL-2400 Bedienungsanleitung
Planet
Planet Pre-N Wireless USB 2.0 Adapter WNL-U550 Bedienungsanleitung
Planet
Planet ENW-3502-FC Bedienungsanleitung
Planet
Planet WL-8314 Bedienungsanleitung
Planet
Planet 802.11g Wireless USB Adapter WLU-356L Bedienungsanleitung
Planet
Planet WDL-U700 Bedienungsanleitung
Planet
Planet VIP-157 Bedienungsanleitung
Planet
Planet WL-3565 Bedienungsanleitung
Planet
Planet ENW-9605 Bedienungsanleitung
Planet
Planet ENW-9701 Bedienungsanleitung
Planet
Planet BT-200U Bedienungsanleitung
Planet
Planet VIP-161SW Bedienungsanleitung
Planet
Planet POE-151 Bedienungsanleitung
