Planet FGSD-1022 Bedienungsanleitung

8-Port 10/100Mbps + 2- Gigabit TP/SFP

Managed Switch

FGSD-1022 / FGSD-1022P

Quick Installation Guide

Table of Contents

1. Package Content.......................................................................................... 3

2. Requirements .............................................................................................. 4

3. Terminal Setup ............................................................................................ 5

4. Logon to the Console ................................................................................... 6

5. Congure IP address.................................................................................... 7

6. Start Web Management................................................................................ 9

7. While IP Address be changed or forgotten admin password – ........................11

8. Customer Support .....................................................................................12

1. Package Content

Thank you for purchasing PLANET 8-Port Fast Ethernet + 2-Port Gigabit TP/SFP

Combo Managed Switch, FGSD-1022 and FGSD-1022P. Terms of “Managed Switch”

means the switches mentioned titled in the cover page of this Quick Installation

Guide.

Upon open the box of the Managed Switch and carefully unpack it. The box should

contain the following items:

● The Managed Switch x 1

● This Quick Installation Guide x 1

● User’s Manual CD x 1

● Power Cord x 1

● Rubber Feet x 4

● Two Rack-mounting Brackets with Attachment Screws x 1

● RS-232 DB9 Male Console Cable

If any item is found missing or damaged, please contact your local reseller for

replacement.

2. Requirements

The Managed Switch provide remote Web interface for manage; the following

equipments are necessary for further management.

nWorkstation installed with Ethernet NIC (Network Interface Card)

n Workstations of subscribers running Windows 98/ME, NT4.0, 2000/XP, Vista, MAC

OS9 or later, Linux, UNIX or other platform compatible with TCP/IP protocols.

nEthernet Port connect

• Network cables - use standard network (UTP) cables with RJ45 connectors

• Above Workstation installed with WEB Browser and JAVA runtime environment

Plug-in

nSerial Port connect

• Above PC with COM Port (DB-9 / RS-232) or USB-to-RS-232 converter

Note

It is recommended to use Internet Explore 6.0 or above to access

the Managed Switch.

3. Terminal Setup

To congure the system, connect a serial cable to a COM port on a PC or

notebook computer and to serial (console) port of the Managed. The console port

of the Managed Switch is DCE already, so that you can connect the console port

directly through PC without the need of Null Modem.

PC / Workstation

with

Terminal emulation software

Managed Switch

Serial Port

57600,8,n,1

RS-232

Figure 3-1 Serial / Console connection

A terminal program is required to make the software connection to the Managed

Switch. Windows’ Hyper Terminal program may be a good choice. The Hyper

Terminal can be accessed from the Start menu.

1. Click START, then Programs, Accessories and then Hyper Terminal.

2. When the following screen appears, make sure that the COM port should be

congured as:

uBaud : 57600

uParity : None

uData bits : 8

uStop bits : 1

uFlow Control : None

Figure 3-2 Hyper Terminal Setting

4. Logon to the Console

Once the terminal has connected to the device, power on the Managed Switch, the

terminal will display that it is running testing procedures.

Then, the following message asks the login user name and password. The factory

default password as following and the login screen in Figure 4-1 appears.

User name: admin

Password: admin

Figure 4-1 Managed Switch Console Login screen

Note

1. For security reason, please change and memorize the new pass-

word after this first setup.

2. Only accept command in lowercase letter under console inter-

face.

5. Congure IP address

The Managed Switch is shipped with default IP address as following.

IP Address : 192.168.0.100

Subnet Mask : 255.255.255.0

To check the current IP address or modify a new IP address for the Switch, please

use the procedures as follow:

nShow the current IP address

1. On “Switch#” prompt, enter “congure”.

2. On “Switch(cong)#” prompt, enter “show ip”.

3. The screen displays the current IP address, Subnet Mask and Gateway. As show

in Figure 5-1.

Figure 5-1 Show IP Information screen

n Congure IP address and Default Gateway

4. On “Switch(cong)#” prompt, enter the following command and press

<Enter>. As show in Figure 5-2.

Switch(cong)# ip address 192.168.1.100 255.255.255.0 192.168.1.1

Switch(Cong)# ip default-gateway 192.168.1.254

The previous command would apply the follow settings for the Switch.

IP: 192.168.1.100

Subnet Mask: 255.255.255.0

Gateway: 192.168.1.1

Figure 5-2 Set IP address screen

5. Repeat Step 1 to check if the IP address is changed.

n Store current switch conguration

6. On “Switch(cong)#” prompt, enter the following command and press

<Enter>.

Switch(cong)# copy running-cong startup-cong

If the IP is successfully congured, the Managed Switch will apply the new IP

address setting immediately. You can access the Web interface of the Managed

Switch through the new IP address.

Note

If you do not familiar with console command or the related param-

eter, enter “help” anytime in console to get the help description.

6. Start Web Management

The Managed Switch provides a built-in browser interface. You can manage it

remotely by having a remote host with Web browser, such as Microsoft Internet

Explorer, Netscape Navigator or Mozilla Firefox.

192.168.0.x

PC / Workstation

with

IE Brower

RJ-45/UTP-Cable

Managed Switch

IP Adress:

192.168.0.100

IP Adress:

Figure 6-1 IP Management Diagram

The following shows how to startup the Web Management of the Managed Switch,

please note the Managed Switch is congured through an Ethernet connection,

make sure the manager PC must be set on the same IP subnet address.

For example, the default IP address of the Managed Switch is 192.168.0.100 (the

factory-default IP address), then the manager PC should be set at 192.168.0.x

(where x is a number between 1 and 254, except 100), and the default subnet

mask is 255.255.255.0.

1. Use Internet Explorer 6.0 or above Web browser, enter IP address

http://192.168.0.100 (the factory-default IP address or that you have just

changed in console) to access the Web interface.

2. When the following dialog box appears, please enter the default user name

“admin” and password “admin”. The login screen in Figure 6-2 appears. In

the following we use FSD-1022 as the example, yet it is same settings for both

Managed Switch model in this guide.

Default IP Address: 192.168.0.100

Default User name: admin

Default Password: admin

Figure 6-2 Web Login Screen of FGSD-1022

3. After entering the user name and password, the Web main screen appears as

Figure 6-3.

Figure 6-3 Web Main Screen of FGSD-1022 series Managed Switch

Now, you can use the Web management interface to continue the Managed Switch

management, please refer to the user manual for more.

Note

For security reason, please change and memorize the new pass-

word after this first setup.

Andere Handbücher für FGSD-1022

Inhaltsverzeichnis

Andere Planet Netzwerk-Router Handbücher

Planet

Planet GS-4210 SERIES Bedienungsanleitung

Planet

Planet GS-4210-24T4SR Bedienungsanleitung

Planet

Planet ADSL VPN/Firewall Router ADW-4200 Bedienungsanleitung

Planet

Planet FGSW-2624SF Series Bedienungsanleitung

Planet

Planet XRT-401D Bedienungsanleitung

Planet

Planet 85M Powerline Ethernet PL-201-UK/US Bedienungsanleitung

Planet

Planet XRT-401C Bedienungsanleitung

Planet

Planet ISW-802M Bedienungsanleitung

Planet

Planet IGS-4215-16T2S Bedienungsanleitung

Planet

Planet FNSW-4800v2 Bedienungsanleitung

Planet

Planet ADE-4100 Bedienungsanleitung

Planet

Planet SGS-5220-24P2X Bedienungsanleitung

Planet

Planet WGSW-24010 Bedienungsanleitung

Planet

Planet EPN-102 Bedienungsanleitung

Planet

Planet FGSD-1022VHP Bedienungsanleitung

Planet

Planet WGSW-404 Bedienungsanleitung

Planet

Planet ADSL 2/2+ Router ADE-3400v2 Bedienungsanleitung

Planet

Planet VC-23 Series Bedienungsanleitung

Planet

Planet GSD-908HP Bedienungsanleitung

Planet

Planet FGSW-2620VM Series Bedienungsanleitung

Planet

Planet GSW-2400HPS Bedienungsanleitung

Planet

Planet ADE-3410 Bedienungsanleitung

Planet

Planet ADE-3410v4 Bedienungsanleitung

Planet

Planet ADW-4301A/B Bedienungsanleitung

Beliebte Netzwerk-Router Handbücher anderer Marken

Allnet

Allnet ALL0333AU Bedienungsanleitung

HomeSeer

HomeSeer HT-SEL Bedienungsanleitung

Sercomm

Sercomm Genesis OC3505D Bedienungsanleitung

Billion

Billion BIPAC 5102 Series Bedienungsanleitung

TP-Link

TP-Link TD-8817 Bedienungsanleitung

Motorola

Motorola MR1900 Bedienungsanleitung

Digi

Digi IX14 Bedienungsanleitung

Cisco

Cisco NCS 540 Handbuch

XAVi

XAVi X8821e Bedienungsanleitung

BEC

BEC 6200WZL Bedienungsanleitung

MikroTik

MikroTik hAP ac3 Series Bedienungsanleitung

Korenix

Korenix JetNet 5428G Series Bedienungsanleitung

NETGEAR

NETGEAR FS526T - Switch Bedienungsanleitung

Korenix

Korenix JetNet 5710G Series Bedienungsanleitung

Automated Logic

Automated Logic ZN551 Betriebsanleitung

Cisco

Cisco ASR 1000 Series Bedienerhandbuch

EnGenius

EnGenius ESR-9710 Bedienungsanleitung

Cisco

Cisco 805 Series Bedienungs- und Sicherheitshinweise