Planet EPN-102 Bedienungsanleitung

Networking & Communication

Quick Installation Guide

GEPON SFU ONU

EPN-102 / EPN-104

Important Safety Instructions



Do not use the GEPON ONU in high humidity or high

temperatures.



Do not use the same power source for the GEPON ONU

as other equipment.



Do not open or repair the case yourself. If the GEPON

ONU is too hot, turn off the power immediately and have it

repaired at a qualified service center.



Avoid using this product and all accessories outdoors.



Place the GEPON ONU on a stable surface.



Only use the power adapter that comes with the package.

Using a different voltage rating power adaptor may

damage the ONU.

Package Content

EPN-102 / EPN-104



EPN-102 / EPN-104 Unit



CD-ROM containing the user’s manual, quick guide



Quick Installation Guide



Power Adapter



RJ-45 cable x 1

If any of the above items are missing or damaged, contact your

local dealer for support.

-2-

Hardware Installation

Please connect the ONU to you devices as follow:

Connecting the RJ-45 network cable.

a. Plug-in the RJ-45 cable to 10/100/1000 GE Port

(EPN-102 only) or 10/100 FE Ports.

b. Plug-in the other side to your host or devices.

Connecting the fiber cable.

Before connecting, please note:

Keep the optical connector and the optical fiber clean.

Make sure the bending diameter of the fiber is more

than 6cm.Otherwise; the optical signal loss may be

increased.

Cover a protective cap to guard against dust and water

when the fiber is not used.

a. Remove the protective cap of the optical fiber.

b. Remove the protective cap of the ONU optical

interface (PON interface). Insert the fiber into the

PON interface.

Connecting Power Adapter.

a. Connect the power adapter to the power socket

on the ONU.

b. Insert the other end into a power outlet.

c. Turn on the power-switch.

-3-

Figure-1 EPN-102 connection diagram

Figure-2 EPN-104 connection diagram

-4-

Verifying the Installation

After power on the ONU, the Power LED will be bright and

system starts to boot. When system is ready, the PON LED will

be flash.

If the PON connection is normal, the PON LED will be off and

Link LED is ON.And then you can enjoy the high bandwidth

connection via PON technology.

Further Configuration

The above steps introduce simple installations and

configurations for EPN-102 / EPN-104. For further information of

Specification, features and applications etc, please refer to the

user’s manual in the CD. If you have other questions, please

contact the local dealer or distributor where you purchased this

product.

2011-BA0020-000

Andere Handbücher für EPN-102

Inhaltsverzeichnis

Andere Planet Netzwerk-Router Handbücher

Planet

Planet FGSW-4840S Bedienungsanleitung

Planet

Planet WNRT-320GS Bedienungsanleitung

Planet

Planet RT-101 Bedienungsanleitung

Planet

Planet IAD-300 Bedienungsanleitung

Planet

Planet GS-4210-24T4SR Bedienungsanleitung

Planet

Planet GSW-1601 Bedienungsanleitung

Planet

Planet XRT-101A Bedienungsanleitung

Planet

Planet EPN-102 Bedienungsanleitung

Planet

Planet ADE-3100 Bedienungsanleitung

Planet

Planet ADE-4100 Bedienungsanleitung

Planet

Planet WNAP-7200 Bedienungsanleitung

Planet

Planet WGR-500-4P Bedienungsanleitung

Planet

Planet G.SHDSL.bis Bridge Router GRT-504 Bedienungsanleitung

Planet

Planet 85M Powerline Ethernet PL-201-UK/US Bedienungsanleitung

Planet

Planet SG-4800 Bedienungsanleitung

Planet

Planet SOHOConnect Series Bedienungsanleitung

Planet

Planet GSD-908HP Bedienungsanleitung

Planet

Planet ADE-3110 Bedienungsanleitung

Planet

Planet FRT-420SN Bedienungsanleitung

Planet

Planet SGS-5220-24P2X Bedienungsanleitung

Planet

Planet 85M Powerline to Ethernet Bridge with 4-Port Switch... Bedienungsanleitung

Planet

Planet XRT-401F Bedienungsanleitung

Planet

Planet ISW-800M Bedienungsanleitung

Planet

Planet ADE-3410 Bedienungsanleitung

Beliebte Netzwerk-Router Handbücher anderer Marken

Allnet

Allnet ALL0333AU Bedienungsanleitung

HomeSeer

HomeSeer HT-SEL Bedienungsanleitung

Sercomm

Sercomm Genesis OC3505D Bedienungsanleitung

Billion

Billion BIPAC 5102 Series Bedienungsanleitung

TP-Link

TP-Link TD-8817 Bedienungsanleitung

Motorola

Motorola MR1900 Bedienungsanleitung

Digi

Digi IX14 Bedienungsanleitung

Cisco

Cisco NCS 540 Handbuch

XAVi

XAVi X8821e Bedienungsanleitung

BEC

BEC 6200WZL Bedienungsanleitung

MikroTik

MikroTik hAP ac3 Series Bedienungsanleitung

Korenix

Korenix JetNet 5428G Series Bedienungsanleitung

NETGEAR

NETGEAR FS526T - Switch Bedienungsanleitung

Korenix

Korenix JetNet 5710G Series Bedienungsanleitung

Automated Logic

Automated Logic ZN551 Betriebsanleitung

Cisco

Cisco ASR 1000 Series Bedienerhandbuch

EnGenius

EnGenius ESR-9710 Bedienungsanleitung

Cisco

Cisco 805 Series Bedienungs- und Sicherheitshinweise