Planet SG-4800 Bedienungsanleitung
Gigabit SSL VPN Security Router
SG-4800
Quick Installation Guide
Table of Contents
1. Package Contents ....................................................................................... 3
2. Hardware Installation .................................................................................. 4
2.1 Safety Instruction ................................................................................ 4
2.2 Front panel ......................................................................................... 4
2.3 LED&Buttondenition........................................................................ 5
2.4 Placement........................................................................................... 5
2.5 Network Connection............................................................................. 6
3. BasicSystemConguration ......................................................................... 7
3.1 Web Login .......................................................................................... 7
3.2 ConguringtheWAN ........................................................................... 8
3.3 Remote Management ..........................................................................10
4. Furtherconguration..................................................................................12
3
1. Package Contents
Thank you for purchasing PLANET Gigabit Multi-Homing VPN Security Router, SG-
4800,andthisQuickInstallationGuidewillintroducehowtonishthebasicsetting
to connect the internet. Open the box of the VPN Security Router and carefully
unpackit.Theboxshouldcontainthefollowingitems:
SG-4800x1l
QuickInstallationGuidex1l
User’sManualCDx1l
PowerCordx1l
Cat5Cablex1l
19inchesBracketsx2l
BracketScrewx8l
If any of above items are damaged or missing, please contact your dealer
immediately.
4
2. Hardware Installation
The followings are instructions for setting up PLANET SG-4800. Refer to the
illustration and follow the simple steps below to quickly install your VPN Security
Router.
2.1 Safety Instruction
ThefollowingisthesafetyinstructionsforVPNSecurityRouterbeforeinstalling.
Themaximumoperatingtemperatureofthe routeris50ºC.Care must be taken
toallowsufcientaircirculation.
The connections and equipment that supply power to the router should be
capableofoperatingsafelywiththemaximumpowerrequirementsoftherouter.
In the event of a power overload, the supply circuits and supply wiring should
notbecomehazardous.
The AC power cord must plug into the right supply voltage. Make sure that the
supplied AC voltage is correct and stable. If the input AC voltage is over 10%
lowerthanthestandardmaycausetheroutertomalfunction.
Generally, when installed after the nal conguration, the product must comply
with the applicable safety standards and regulatory requirements of the country
inwhichitisinstalled.Ifnecessary,consultfortechnicalsupport.
2.2 Front panel
Figure 2-1 Front Panel of the SG-4800
Power Indicator:Lightsupwhenthepowerison.
DIAG Indicator:Glitterswhensystemisonself-testafterpoweronthedevice.
Ethernet Port can be set as a:
LAN Port:lTheSecurityRoutersupports8LANport.
WAN Port:lTheSecurityRoutersupports4WANports.
DMZ Port:lTheSecurityRoutersupports1DMZport.
5
2.3 LED&Buttondenition
LED Color Status Description
PWR Green Steady PowerOn
Off Off PowerOff
DIAG Amber
SteadyOn Systemiscrashed.
Blinking Systemisonself-testafterpoweronthe
device.
Off System is ready.
WAN/DMZ
LINK/ACT Green
SteadyOn Porthasbeenconnected&getsIP.
Blinking Transmit data.
Off NotgettheIPaddress,eventheporthas
been connected.
LAN
LINK/ACT Green SteadyOn LANporthasbeenconnected.
Blinking Transmit data.
LAN/
WAN/DMZ
Speed
Green SteadyOn Works on 1000Mbps.
Amber SteadyOn Works on 100Mbps.
Off Off Works on 10Mbps.
Button Action Description
Reset
Press for 5 Secs Warm Start
DIAGindicator:AmberLEDashingslowly.
PressOver10Secs Factory Default
DIAGindicator:AmberLEDashingquickly.
2.4 Placement
Makesurethedeviceisplacedinasafeenvironmenttoavoidequipmentfailure.
DONOTplaceanythingontopofthedevice.Excessiveweightcoulddamageit.l
DO NOT obstruct ventilation slots on each side of the router or expose it tol
direct sunlight or other heat source. Be sure that there is adequate air ow
aroundtherouter.
Placetherouteronaatsurfacetoavoidanydamage.l
6
2.5 Network Connection
SSL VPN Tunnel
Modem
ADSL
PC SG-4800
Vendor
Headquarters Action Office
Branch Offices
Mail-ServerWeb-Server
DMZ
Access Point
Firewall GatewayFirewall Gateway
Modem
Modem
Modem
PC
PC Group
PC
PC
Laptop
Firewall Firewall
ADSL
ADSL
a/n
PPTP VPN Tunnel
IPSec VPN Tunnel
IPSec VPN Tunnel
ADSL 2/2+
ADSL
VDSL2
VDSL2
100Base-TX UTP
1000Base-T UTP
5GHz 802.11a/n
a/n
VDSL2VDSL2
Action Office
Internet
Finance-Server
Figure 2-2 Topology of the SG-4800
7
3.BasicSystemConguration
3.1 Web Login
Step 1. Connect a computer to a LAN port on the router. Your PC (DHCP client
mode) will obtain an IP address automatically. (It is usually in the
192.168.1.xrange.)
Step 2. Start a web browser. To use the user interface, you need a PC with
InternetExplorer(version6andhigher),Firefox,orSafari(forMac).
Step 3. Enter the default IP address of the router: 192.168.1.1 into the URL
addressbox.
Step 4. Enterthedefaultusernameadminandthedefaultpasswordadmin.Then
clickLogintoenterWeb-baseduserinterface.
Figure 3-1 Login page of the SG-4800
DefaultLANIP:192.168.1.1
DefaultName:admin
DefaultPassword:admin
8
3.2 ConguringtheWAN
Step 1. GotoNetwork NetworkConnectiontondWAN Setting.
Figure 3-2 Network connection button
Figure 3-3 Multi-WAN interface setting page
9
Step 2. ClickEdittoenterWANcongurationpage.
Figure 3-4 WAN conguration page
There are six types of WAN connection. They are Obtain an IP automatically,
Static IP, PPPoE (Point-to-Point Protocol over Ethernet), PPTP (Point-to-Point
Tunneling Protocol), Transparent Bridge or Router Plus NAT Mode. Users
can choose according to their actual network structure. You can nd detail setting
processintheusermanual.
Figure 3-5 WAN connection type selection item
10
3.3 Remote Management
Thefunctioncanenableuserstomanagethesecurityrouteratremotesitesandto
allowtechnicalpersontoassistyouinsolvingnetworkproblem.
Step 1. GotoFirewall General Policy.
Figure 3-6 The rewall setting button
Figure 3-7 General Policy setting page
Step 2. Click Enable to active Remote Management. And then enter the control
portyouwanttouse.Thedefaultvalueis8080.
Step 3. Click Applytosavetheconguration.Andyoucantypethehttp://WAN
IP address: 8080toaccesstherouterfromtheremoteside.
Andere Handbücher für SG-4800
1
Inhaltsverzeichnis
Andere Planet Netzwerk-Router Handbücher
Planet
Planet IGS-604HPT-M12 Bedienungsanleitung
Planet
Planet MH-3400 Bedienungsanleitung
Planet
Planet ADSL 2/2+ Router ADE-3400v2 Bedienungsanleitung
Planet
Planet ADE-3400v3 Bedienungsanleitung
Planet
Planet FGSW-4840S Bedienungsanleitung
Planet
Planet GSW-2400HPS Bedienungsanleitung
Planet
Planet EPN-102 Bedienungsanleitung
Planet
Planet GS-5220-48T4X Bedienungsanleitung
Planet
Planet GS-4210-24T4SR Bedienungsanleitung
Planet
Planet VR-300 Series Bedienungsanleitung
Planet
Planet WNRT-617 Bedienungsanleitung
Planet
Planet ADN-4100 Bedienungsanleitung
Planet
Planet WNRT-625G Bedienungsanleitung
Planet
Planet FGSW-2620VM Series Bedienungsanleitung
Planet
Planet AND-4102 Bedienungsanleitung
Planet
Planet IGS-4215-16T2S Bedienungsanleitung
Planet
Planet SW-502 Bedienungsanleitung
Planet
Planet RT-101 Bedienungsanleitung
Planet
Planet GS-4210-16T2S Bedienungsanleitung
Planet
Planet Gaw9.2Z18-4 Bedienungsanleitung
Beliebte Netzwerk-Router Handbücher anderer Marken
NETGEAR
NETGEAR FS526T - Switch Bedienungsanleitung
Korenix
Korenix JetNet 5710G Series Bedienungsanleitung
Automated Logic
Automated Logic ZN551 Betriebsanleitung
Cisco
Cisco ASR 1000 Series Bedienerhandbuch
EnGenius
EnGenius ESR-9710 Bedienungsanleitung
Cisco
Cisco 805 Series Bedienungs- und Sicherheitshinweise