Planet WGSD-10020 Bedienungsanleitung
L2+ Gigabit Ethernet Managed Switch
WGSD-10020 Series
WGSW-20160HP
WGSW-24040 Series
Quick Installation Guide
Table of Contents
1. Package Contents ....................................................................................... 3
2. Requirements ............................................................................................. 4
3. Terminal Setup ........................................................................................... 5
4. Logon to Console........................................................................................ 6
5. ConguringIPAddress................................................................................ 7
6. Starting Web Management .......................................................................... 9
7. SavingConguration..................................................................................12
8. RecoveringBacktoDefaultConguration.....................................................13
9. Customer Support .....................................................................................14
3
1. Package Contents
Thank you for purchasing PLANET L2+ Gigabit Ethernet Managed Switch, which
comes with multiple RJ45 copper ports being made for a Gigabit Ethernet Switch
with SFP ber optic connectibility and robust layer 2 and layer 4 features. The
descriptionofthismodelisshownbelow:
WGSD-10020 L2+ 8-Port 10/100/1000Base-T + 2-Port 100/1000Base-X SFP
ManagedSwitch
WGSD-10020HP L2+ 8-Port 10/100/1000Base-T PoE Plus + 2-Port 100/1000Base-X
SFPManagedSwitch
WGSW-20160HP L2+ 16-Port 10/100/1000Base-T PoE Plus + 4-Port Gigabit TP/
SFPComboManagedSwitch
WGSW-24040 L2+ 24-Port 10/100/1000Base-T + 4-Port Shared SFP Managed
Switch
WGSW-24040R L2+ 24-Port 10/100/1000Base-T + 4-Port Shared SFP Managed
Switchw/48VDCRedundantPower
WGSW-24040HP L2+ 24-Port 10/100/1000Base-T PoE Plus + 4-Port Shared SFP
ManagedSwitchw/220W
WGSW-24040HP4 L2+ 24-Port 10/100/1000Base-T PoE Plus + 4-Port Shared SFP
ManagedSwitchw/440W
“Managed Switch” is used as an alternative name in this Quick Installation
Guide.
Open the box of the Managed Switch and carefully unpack it. The box should
containthefollowingitems:
zTheManagedSwitchx1
zQuickInstallationGuidex1
zRS232DB9FemaleConsoleCablex1
zRubberFeetx4
zTwoRack-mountingBracketswithAttachmentScrewsx1
zPowerCordx1
zSFPDust-proofCapx2(WGSD-10020Series)
zSFPDust-proofCapx4(WGSW-20160HP/WGSW-24040Series)
If any item is found missing or damaged, please contact your local reseller for
replacement.
4
2. Requirements
zWorkstations running Windows XP/2003/Vista/7/8/2008, MAC OS X or later,
Linux,UNIX,orotherplatformsarecompatiblewithTCP/IPprotocols.
zWorkstationsareinstalledwithEthernetNIC(NetworkInterfaceCard)
zSerialPortConnection(Terminal)
The above Workstations come with COM Port (DB9) or USB-to-RS-232
converter.
The above Workstations have been installed with terminal emulator, such as
HyperTerminalincludedinWindowsXP/2003.
zSerial cable -- one end is attached to the RS-232 serial port, while the other
endtotheconsoleportoftheManagedSwitch.
zEthernetPortConnection
Networkcables--Usestandardnetwork(UTP)cableswithRJ-45connectors.
The above PC is installed with Web browser and JAVA runtime environment
plug-in.
Note
It is recommended to use Internet Explore 8.0 or above to access
the Managed Switch. If the Web interface of the Managed Switch
is not accessible, please turn off the anti-virus software or firewall
andthentryitagain.
5
3. Terminal Setup
Tocongurethesystem,connectaserialcabletoaCOM port on a PC or notebook
computerandtoRS-232typeofserialportoftheManagedSwitch.
Managed Switch
Serial Port
Serial Port
115200,8,n,1
PC / Workstation
with
Terminal emulation software
RS-232
Figure 3-1: Managed Switch Console Connectivity
A terminal program is required to make the software connection to the Managed
Switch.
1. Run terminal program on the OS.
2.When the following screen appears, make sure that the COM port should be
conguredas:
zBaud :115200
zDatabits :8
zParity :None
zStopbits :1
zFlowcontrol :None
Figure 3-2: COM Port Conguration
6
4. Logon to Console
Once the terminal is connected to the device, power on the Managed Switch, and
the terminal will display “running testing procedures”. Then, the following message
asks to log-in user name and password. The factory default user name and
passwordareshownasfollowsandtheloginscreeninFigure4-1appears.
Username:admin
Password:admin
Figure 4-1: Managed Switch Console Login Screen
The user can now enter commands to manage the Managed Switch. For a detailed
descriptionofthecommands,pleaserefertothefollowingchapters.
Note
1.For security reason, please change and memorize the new pass-
wordafterthisfirstsetup.
2.Only accept command in lowercase letter under console inter-
face.
7
5.ConguringIPAddress
TheManagedSwitchisshippedwithdefaultIPaddressshownbelow.
IPAddress:192.168.0.100
SubnetMask:255.255.255.0
To check the current IP address or modify a new IP address for the Switch, please
usetheproceduresasfollows:
Show the current IP Address
1.Atthe“#”prompt,enter“show ip interface brief”.
2.ThescreendisplaysthecurrentIPaddressasshowninFigure5-1.
Figure 5-1: IP Information Screen
Conguring IP Address
3.At the “#” prompt, enter the following command and press <Enter> as shown
inFigure5-2.
WGSD-10020HP# congure terminal
WGSD-10020HP(cong)# interface vlan 1
WGSD-10020HP(cong-if-vlan)# ip address 192.168.1.100 255.255.255.0
8
ThepreviouscommandwouldapplythefollowingsettingsfortheManagedSwitch.
IPAddress:192.168.1.100
SubnetMask:255.255.255.0
Figure 5-2: Conguring IP Address Screen
4.Repeatstep1tocheckiftheIPaddressischanged.
Store current switch conguration
5.Atthe“#”prompt,enterthefollowingcommandandpress<Enter>.
# copy running-cong startup-cong
Figure 5-3: Saving Current Conguration Command Screen
If the IP is successfully congured, the Managed Switch will apply the new IP
address setting immediately. You can access the Web interface of the Managed
SwitchthroughthenewIPaddress.
Note
If you are not familiar with the console command or the related
parameter, enter “help” anytime in console to get the help
description.
9
6. Starting Web Management
The following shows how to start up the Web Management of the Managed
Switch. Note the Managed Switch is congured through an Ethernet connection.
Please make sure the manager PC must be set on the same IP subnet address.
For example, the default IP address of the Managed Switch is 192.168.0.100,
then the manager PC should be set at 192.168.0.x (where x is a number
between1and254,except100),andthedefaultsubnetmaskis255.255.255.0.
Managed Switch
RJ-45/UTP-Cable
PC / Workstation with IE Browser
IP Address: 192.168.0.x
IP Address: 192.168.0.100
Figure 6-1: IP Management Diagram
Logging in the Managed Switch
1.Use Internet Explorer 8.0 or above Web browser and enter IP address
http://192.168.0.100(thefactorydefaultIPaddressortheonethatyouhave
justchangedinconsole)toaccesstheWebinterface.
2.When the following dialog box appears, please enter the default user name and
password “admin” (or the password you have changed via console). The login
screeninFigure6-2appears.
10
DefaultUsername:admin
DefaultPassword:admin
Figure 6-2: Login Screen
Note
The following web screen is based an the WGSD-10020HP. For
WGSW-20160HP and WGSW-24040 Series, the displays will be the
sameastheWGSD-10020HP.
3.Afterenteringthepassword,themainscreenappearsasFigure6-3shows.
Figure 6-3: Web Main Screen of Managed Switch
Andere Handbücher für WGSD-10020
4
Dieses Handbuch passt für folgende Modelle
2
Inhaltsverzeichnis
Andere Planet Netzwerk-Router Handbücher
Planet
Planet WGD-800 Bedienungsanleitung
Planet
Planet 802.11g Wireless Access Point / Bridge... Bedienungsanleitung
Planet
Planet ADW-4401 A/B Bedienungsanleitung
Planet
Planet FRT-420SN Bedienungsanleitung
Planet
Planet WAP-200N Bedienungsanleitung
Planet
Planet ADE-3110 Bedienungsanleitung
Planet
Planet FSD-1603 Bedienungsanleitung
Planet
Planet WNRT-617 Bedienungsanleitung
Planet
Planet XRT-811 Bedienungsanleitung
Planet
Planet FGSW-2620VM Series Bedienungsanleitung
Planet
Planet FNSW-1600P Bedienungsanleitung
Planet
Planet ADSL 2/2+ VPN Firewall Router ADE-4300A/B Bedienungsanleitung
Planet
Planet FGSW-2620 Bedienungsanleitung
Planet
Planet PL-510W Bedienungsanleitung
Planet
Planet ADE-3410v4 Bedienungsanleitung
Planet
Planet GS-4210-24P2S Bedienungsanleitung
Planet
Planet GS-4210-24T4SR Bedienungsanleitung
Planet
Planet ERT-805 Bedienungsanleitung
Planet
Planet GSD-908HP Bedienungsanleitung
Planet
Planet ISW-500T Bedienungsanleitung
Beliebte Netzwerk-Router Handbücher anderer Marken
NETGEAR
NETGEAR FS526T - Switch Bedienungsanleitung
Korenix
Korenix JetNet 5710G Series Bedienungsanleitung
Automated Logic
Automated Logic ZN551 Betriebsanleitung
Cisco
Cisco ASR 1000 Series Bedienerhandbuch
EnGenius
EnGenius ESR-9710 Bedienungsanleitung
Cisco
Cisco 805 Series Bedienungs- und Sicherheitshinweise