Planet FGSD-1022 Bedienungsanleitung
- 1
FGSD-1022
8-Port 10/100Mbps + 2G TP/SFP Combo
Managed Switch
FGSD-1022P
8-Port 10/100Mbps + 2G TP/SFP Combo
Managed PoE Switch
FGSD-1022HP
8-Port 10/100Mbps + 2G TP/SFP Combo
Managed 802.3at PoE Switch
Quick Installation Guide
Quick Installation Guide
- 2 -
Table of Contents
1. Package Content....................................................................................3
2. Requirements.........................................................................................4
3. Terminal Setup .......................................................................................5
4. Logon to the Console .............................................................................7
5. Configure IP address..............................................................................8
6. Start Web Management........................................................................11
7. While IPAddress be changed or forgotten admin password –.............14
8. Customer Support................................................................................15
Quick Installation Guide
- 3 -
1. Package Content
Thank you for purchasing PLANET 8-Port Fast Ethernet + 2-Port Gigabit
TP/SFP Combo Managed Switch, FGSD-1022, FGSD-1022P and
FGSD-1022HP. Terms of “Managed Switch” means the switches
mentioned titled in the cover page of this Quick Installation Guide.
Upon open the box of the Managed Switch and carefully unpack it. The
box should contain the following items:
The Managed Switch x 1
This Quick Installation Guide x 1
User’s Manual CD x 1
Power Cord x 1
Rubber Feet x 4
Two Rack-mounting Brackets with Attachment Screws x 1 (Set)
RS-232 DB9 Male Console Cable x1
If any item is found missing or damaged, please contact your local
reseller for replacement.
Quick Installation Guide
- 4 -
2. Requirements
The Managed Switch provide remote Web interface for manage; the
following equipments are necessary for further management.
Workstation installed with Ethernet NIC (Network Interface Card)
The operate system of subscriber PC that running Windows
XP/2003, Vista, Windows 7, MAC OS X , Linux, Fedora, Ubuntu or
other platform compatible with TCP/IP protocols.
Ethernet Port connect
•Network cables - use standard network (UTP) cables with RJ45
connectors.
•Above Workstation installed with WEB Browser and JAVA runtime
environment Plug-in
Serial Port connect
•Above PC with COM Port (DB-9 / RS-232) or USB-to-RS-232
converter
It is recommended to use Internet Explore 6.0 or above to
access the Managed Switch.
Quick Installation Guide
- 5 -
3. Terminal Setup
To configure the system, connect a serial cable to a COM port on a PC or
notebook computer and to serial (console) port of the Managed Switch.
The console port of the Managed Switch is DCE already, so that you can
connect the console port directly through PC without the need of Null
Modem.
Figure 3-1 Serial / Console connection
A terminal program is required to make the software connection to the
Managed Switch. Windows' Hyper Terminal program may be a good
choice. The Hyper Terminal can be accessed from the Start menu.
1. Click START, then Programs, Accessories and then Hyper
Terminal.
2. When the following screen appears, make sure that the COM port
should be configured as:
♦Baud : 57600
♦Parity : None
♦Data bits : 8
♦Stop bits : 1
♦Flow Control : None
Quick Installation Guide
- 6 -
Figure 3-2 Hyper Terminal Setting
Quick Installation Guide
- 7 -
4. Logon to the Console
Once the terminal has connected to the device, power on the Managed
Switch, the terminal will display that it is running testing procedures.
Then, the following message asks the login user name and password. The
factory default username / password as following and the login screen in
Figure 4-1 appear.
User name: admin
Password: admin
Figure 4-1 Managed Switch Console Login screen
1. For security reason, please change and memorize the
new password after this first setup.
2. Only accept command in lowercase letter under console
interface.
Quick Installation Guide
- 8 -
5. Configure IP address
The Managed Switch is shipped with default IP address as following.
IPAddress : 192.168.0.100
Subnet Mask : 255.255.255.0
To check the current IP address or modify a new IP address for the
Managed Switch, please use the procedures as follow:
Show the current IP address
1. On ”Switch# ” prompt, enter “configure”
2. On ”Switch(config)# ” prompt, enter “show ip”.
3. The screen displays the current IP address, Subnet Mask and
Gateway. As show in Figure 5-1.
Figure 5-1 Show IP Information Screen
Quick Installation Guide
- 9 -
Configure IP address and Default Gateway
4. On “Switch(config)# ” prompt, enter the following command and
press <Enter>. As show in Figure 5-2.
Switch(config)# ip address 192.168.1.100 255.255.255.0
Switch(Config)# ip default-gateway 192.168.1.254
The previous command would apply the follow settings for the Managed
Switch.
IP: 192.168.1.100
Subnet Mask: 255.255.255.0
Gateway: 192.168.1.254
Figure 5-2 Set IP address Screen
- 10
5. Repeat Step 1 to check if the IP address is changed.
Store current switch configuration
6. On “Switch(config)# ” prompt, enter the following command and
press <Enter>.
Switch(config)# copy running-config startup-config
If the IP is successfully configured, the Managed Switch will apply the new
IP address setting immediately. You can access the Web interface of the
Managed Switch through the new IP address.
If you do not familiar with console command or the related
parameter, enter “help” anytime in console to get the help
description.
Andere Handbücher für FGSD-1022
1
Dieses Handbuch passt für folgende Modelle
2
Inhaltsverzeichnis
Andere Planet Schalten Handbücher
Planet
Planet GSD-1020S Bedienungsanleitung
Planet
Planet ISW-500 Bedienungsanleitung
Planet
Planet WGS-4215-T Bedienungsanleitung
Planet
Planet ISW-1022MT Bedienungsanleitung
Planet
Planet KVM-210 Series Bedienungsanleitung
Planet
Planet WSD-800 Bedienungsanleitung
Planet
Planet WGSW-52040 Bedienungsanleitung
Planet
Planet IGS-5225 Series Bedienungsanleitung
Planet
Planet IDL-2402 Bedienungsanleitung
Planet
Planet WGS-6325-8UP2X Bedienungsanleitung
Planet
Planet XGS3-24042 Bedienungsanleitung
Planet
Planet FSD-804P Bedienungsanleitung
Planet
Planet GSW-4804SF Bedienungsanleitung
Planet
Planet WGSD-1022 Bedienungsanleitung
Planet
Planet Switch Bedienungsanleitung
Planet
Planet WGSW-24040 Bedienungsanleitung
Planet
Planet POE-1200 Bedienungsanleitung
Planet
Planet FGSD-910P Bedienungsanleitung
Planet
Planet KVM-810 Bedienungsanleitung
Planet
Planet FGSD-1008HPS Bedienungsanleitung
