Planet NOVASwitch Series Bedienungsanleitung

Dieses Handbuch passt für folgende Modelle

3

Inhaltsverzeichnis

Andere Planet Schalten Handbücher

Planet

Planet WGSW-24000 Bedienungsanleitung

Planet

Planet WH-2400M Bedienungsanleitung

Planet

Planet MGSD-10080F Bedienungsanleitung

Planet

Planet GSD-805 Bedienungsanleitung

Planet

Planet FSD-5816 Bedienungsanleitung

Planet

Planet NOVASwitch FNSW-8086F Bedienungsanleitung

Planet

Planet IGS-5225-8T2S2X Bedienerhandbuch

Planet

Planet FSP-804P Bedienungsanleitung

Planet

Planet XGS-6320-8X8TR Bedienungsanleitung

Planet

Planet IKVM-8020 Bedienungsanleitung

Planet

Planet WGS-6325-8UP2X Bedienungsanleitung

Planet

Planet FSD-804P Bedienungsanleitung

Planet

Planet WGS-803 Bedienungsanleitung

Planet

Planet GSW-4804SF Bedienungsanleitung

Planet

Planet GSD-1022UP Bedienungsanleitung

Planet

Planet GSD-1002M Bedienungsanleitung

Planet

Planet IGS-1020PTF Series Bedienungsanleitung

Planet

Planet IGS-5227X-4P2T Bedienungsanleitung

Planet

Planet GSW-1820HP Bedienungsanleitung

Planet

Planet GS-6320-8P2X Bedienungsanleitung

Planet

Planet FSD-808P Bedienungsanleitung

Planet

Planet WGSD-1022 Bedienungsanleitung

Planet

Planet BSP-360 Bedienungsanleitung

Planet

Planet GS-5220 Series Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401M Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung

0

10/100Mbps Switch

FNSW-800

Modules

FNSW-001ST / FNSW-001SC

Quick Installation Guide

1

FCC Warning

These devices have been tested and found to comply with

the limits for a class A digital device, pursuant to Part 15 of the

FCC Rules. These limits are designed to provide reasonable

protection against harmful interface when the equipment is

operated in a commercial environment. This equipment

generates, uses an can radiate radio frequency energy and, if

not installed and used properly may cause harmful

interference to radio communications. Operation of this

equipment in a residential area is likely to cause harmful

interference in which case the user will be required to correct

the interference at the user’s own expense.

Revision

This installation guide is used for PLANET NOVASwitch

series-

Model: FNSW-001ST, FNSW-001SC

Revision: 1.0 (October, 1998)

Part No.: EMQ-FNSW001

Copyright © 1998 Planet Technology Corp.

Contents subject to revision without prior notice.

PLANET is a registered trademark of PLANET Technology

Corp. The information in this manual is subject to change

without notice. All other trademarks belong to their respective

owners.

2

Part One: Outlooks, Check List & Features

Outlooks

Extension module for FNSW-800

FDXHDX

FDXHDX

ST /SC Interface

FNSW-001ST/FNSW-001SC:

1-port 100Base-FX switch extension module

Check List

Modules:

♦The Module

♦This Installation Guide

3

Part Two: Installation

Installation

1. Cabling Guidelines

♦Maximum length of a multi-mode fiber cable (62.5/

125µm) is:

2 kilometers (6560 feet) for full-duplex, or

412 meters (1351 feet) for half-duplex 100Base-FX

after module installed

2. Power off the FNSW-800 and remove the unit from the 19-

inch rack.

3. Release the two screws to remove the module cover. Make

sure the last port (port#8) is free

4. Slide in the module follows the chutes firmly. Secure the two

screws.

Extension Slot

Full-Duplex

Half-Duplex

5. Put back the switch.

6. Make the connection follow the cabling guidelines above.

Note, please check the mode (Full/Half-Duplex) of the

device that is going to attached to and set the DIP switch.

7. Power on the unit and the connected devices, the LED

indicators of port#8 will blink follow the user's guide of

FNSW-800, section "LED Indications".