Planet WAP-3000 Bedienungsanleitung

Wireless Access Point

WAP-3000

User Manual

Networking & Communicatio

publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or

translated into any language or computer language, in any form or by any means, electronic,

mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written

permission of PLANET.

PLANET makes no representations or warranties, either expressed or implied, with respect

to the contents hereof and specifically disclaims any warranties, merchantability or fitness for

any particular purpose. Any software described in this manual is sold or licensed "as is".

Should the programs prove defective following their purchase, the buyer (and not PLANET,

its distributor, or its dealer) assumes the entire cost of all necessary servicing, repair, and

any incidental or consequential damages resulting from any defect in the software. Further,

PLANET reserves the right to revise this publication and to make changes from time to time

in the contents hereof without obligation to notify any person of such revision or changes.

All brand and product names mentioned in this manual are trademarks and/or registered

trademarks of their respective holders.

Disclaimer

PLANET Technology does not warrant that the hardware will work properly in all

environments and applications, and makes no warranty and representation, either implied or

expressed, with respect to the quality, performance, merchantability, or fitness for a

particular purpose.

PLANET has made every effort to ensure that this User’s Manual is accurate; PLANET

disclaims liability for any inaccuracies or omissions that may have occurred.

Information in this User’s Manual is subject to change without notice and does not represent

a commitment on the part of PLANET. PLANET assumes no responsibility for any

inaccuracies that may be contained in this User’s Manual. PLANET makes no commitment

to update or keep current the information in this User’s Manual, and reserves the right to

make improvements to this User’s Manual and/or to the products described in this User’s

Manual, at any time without notice.

If you find information in this manual that is incorrect, misleading, or incomplete, we would

appreciate your comments and suggestions.

Federal Communication Commission Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment

generates, uses, and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If

this equipment does cause harmful interference to radio or television reception, which can

be determined by turning the equipment off and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

1.Reorient or relocate the receiving antenna.

2. Increase the separation between the equipment and receiver.

3. Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

4.Consult the dealer or an experienced radio technician for help.

FCC Caution

To assure continued compliance. (example-use only shielded interface cables when

connecting to computer or peripheral devices). Any changes or modifications not expressly

approved by the party responsible for compliance could void the user’s authority to operate

the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the Following

two conditions: ( 1 ) This device may not cause harmful interference, and ( 2 ) this Device

must accept any interference received, including interference that may cause undesired

operation.

Federal Communication Commission (FCC) Radiation Exposure

Statement

This equipment complies with FCC radiation exposure set forth for an uncontrolled

environment. In order to avoid the possibility of exceeding the FCC radio frequency

exposure limits, human proximity to the antenna shall not be less than 20 cm(8 inches)

during normal operation.

R&TTE Compliance Statement

This equipment complies with all the requirements of DIRECTIVE 1999/5/CE OF THE

EUROPEAN PARLIAMENT AND THE COUNCIL OF 9 March 1999 on radio equipment and

telecommunication terminal Equipment and the mutual recognition of their conformity

(R&TTE)

The R&TTE Directive repeals and replaces in the directive 98/13/EEC (Telecommunications

Terminal Equipment and Satellite Earth Station Equipment) As of April 8,2000.

Safety

This equipment is designed with the utmost care for the safety of those who install and use it.

However, special attention must be paid to the dangers of electric shock and static electricity

when working with electrical equipment. All guidelines of this and of the computer

manufacture must therefore be allowed at all times to ensure the safe use of the equipment.

EU Countries Intended for Use

The ETSI version of this device is intended for home and office use in Austria, Belgium,

Denmark, Finland, France (with Frequency channel restrictions). Germany, Greece, Ireland,

Italy, Luxembourg .The Netherlands, Portugal, Spain, Sweden and United Kingdom.

The ETSI version of this device is also authorized for use in EFTA member states Iceland,

Liechtenstein, Norway and Switzerland.

Potential restrictive use

France: Only channels 10,11,12 and 13

Revision

User’s Manual for PLANET Wireless Access Point

Model: WAP-3000

Rev. 1.0 (July, 2002)

Part No. EM-WAP3000v1

Table of Contents

CHAPTER 1 INTRODUCTION.................................................................................................. 1

1.1 FEATURES......................................................................................................................... 1

1.2 APPLICATIONS ................................................................................................................... 1

1.3 SPECIFICATION.................................................................................................................. 2

1.4 PACKAGE CONTENTS......................................................................................................... 2

1.5 MINIMUM SYSTEM REQUIREMENTS FOR CONFIGURATION..................................................... 3

1.6 SAFETY PRECAUTION ........................................................................................................ 3

1.7 LED AND BUTTON DEFINITION ........................................................................................... 3

1.8 BOTTOM VIEW................................................................................................................... 4

CHAPTER 2 CONFIGURATION UTILITY INSTALLATION ..................................................... 5

2.1 WINDOWS 98/ME/2000/XP INSTALLATION.......................................................................... 5

CHAPTER 3 USING CONFIGURATION UTILITY.................................................................. 10

3.1 PROFILES.........................................................................................................................11

3.1.1 Edit Profile -> WiFi..................................................................................................11

3.1.2 Edit Profile -> IP/SNMP ......................................................................................... 12

3.2 HELP .............................................................................................................................. 13

APPENDIX .............................................................................................................................. 14

Chapter 1 Introduction

Thank you for purchasing WAP-3000. This device features the latest innovation wireless

technology making the wireless networking world happened. This manual guides you on how

to install and properly use the WAP-3000 in order to take full advantage of its features.

1.1 Features

 2.4GHz ISM band, unlicensed operation

 Wireless connection without the hassles and cost of cabling

 Wireless LAN IEEE 802.11b compliant

 Up to 11Mbps data rate with CSMA/CA

 Utilize Direct Sequence Spread Spectrum (DSSS) Technology to provide robust,

interference-resistant solution in a multi-user environment

 Working range up to 350 feet indoor and 1100 feet outdoor

 Seamless integration with IEEE 802.3 LAN through WAP-3000 or other IEEE 802.11b

compliant Access Point

 Channel Agility to Avoid In-Band Interference from Household Appliances, such as

Microwave Ovens and Cordless Phones

 Provides Window-based Configuration Utility

 Support IEEE802.11e standard (Future Function)

 Parameterized Quality of Service (QoS) to Support Multimedia Distribution and Ensure

Delivery of Isochronously /Time-Dependent Content (Future Function).

1.2 Applications

1. Remote access to corporate network information

E-mail, file transfer and terminal emulation.

2. Difficult-to-wire environments

Historical or old buildings, asbestos installations, and open area where wiring is difficult

to employ.

3. Frequently changing environments

Retailers, manufacturers and banks who frequently rearrange the workplace and

change location.

4. Temporary LANs for special projects or peak time

Trade shows, exhibitions and construction sites need temporary setup for a short time

period. Retailers, airline and shipping companies need additional workstations for a

peak period. Auditors require workgroups at customer sites.

5. Access to database for mobile workers

Doctors, nurses, retailers, white-collar workers need access to database while being

mobile in the hospital, retail store or office campus.

6. SOHO (Small Office and Home Office) users

SOHO users need easy and quick installation of a small computer network.

7. High security connection

The wireless security network installs quickly and provides the flexibility to reconfigure

easily.

1.3 Specification

Product Wire Free – Wireless Access Point

Model Name WAP-3000

LED Indicators Power, Act, IEEE802.11e, PC/HUB, CM/DCT

Operating Frequency / Channel 2.412~2.462GHz (FCC, Canada) / 11 Channels

2.412~2.4835GHz (Japan, TELEC) / 14 Channels

2.412~2.472GHz (Euro ETSI) / 13 Channels

RF Modulation Direct Sequence Spread Spectrum (DSSS) Technology

(CCK, DQPSK, DBPSK)

RF Output Power 20dBm

Sensitivity -83dBm (@ PER<8%)

Data Rate 11, 5.5, 2, 1 Mbps with auto-rate fall back

Media Access Protocol CSMA/CA + ACK, IEEE802.11b Compliant

Standard Antenna Built-in antenna

Range Up to 1100 feet outdoor and 350 feet indoor

Dimension (D x W x H) 163 x 89 x 55mm

Temperature 0 – 55 degree C (Operating), -20~70 degree C (Storage)

Humidity 0-90%, non-condensing (Operating and storage)

Management Windows-Based Configuration Utility

SNMP

Power Requirement 5V DC, 2A

STANDARDS COMPLIANCE

Electromagnetic Compatibility FCC Part 15 class A, CE, ETSI 300, 328

1.4 Package Contents

Before installation, please check the items of your package. The package should include

the following items:

WAP-3000 x1

Quick Installation Guide x 1

Drivers and User’s Manual CD x 1

USB Cable (for configuration) x 1

Power Adapter x 1

If any of the above items are missing, contact your supplier as soon

as possible.

1.5 Minimum System Requirements for Configuration

Before installation, please check the following requirements with your equipment.

• Operating System: Windows 98/Me/2000/XP

• Desktop PC or Notebook with CD-ROM drive

• USB Port controller in case of desktop PC or Notebook

1.6 Safety Precaution

Only use the accessories and connection cables attached with the device package.

Otherwise, the device may not function. If you miss or damage the accessories or

connection cables, please contact your local dealer.

1.7 LED and Button Definition

LED Icon Color Function

Power Green Off: Power is not connected

Lit: Power On

WLAN Act Green Off: Wireless LAN is not working

Flash: Wireless LAN is working

IEEE802.11e Green Off: Working in IEEE802.11b

Lit: Working in IEEE802.11e Multimedia mode

(Future Function)

PC/HUB Green Off: PC/HUB port is not connected.

Lit: PC/HUB port is connected.

Flash: There are packets transmitting / receiving

on this port.

CM/DCT Green Off: CM/DCT port is not connected.

Lit: CM/DCT port is connected.

Flash: There are packets transmitting / receiving

on this port.

1.8 Bottom View

The bottom of WAP-3000 provides the following ports:

USB Please use the provided USB cable to connect to your Windows PC and

Configure. When the USB cable is connected, the network interface will be

disabled. Thus, please disconnect the USB port when configuration is

completed.

CM/DCT This port is MDI-X port that can be directly connected to Cable Modem, ADSL

Modem or PC by straight cable.

PC/HUB This port is MDI port that is for connecting to Switch/Hub by straight cable or PC

directly by cross-over cable.

PW Please use a 5VDC, 2A power adapter to supply power for WAP-3000.

Note: CM/DCT port and PC/HUB port can be used at the same time. They actually

can be saw as two ports hub with different type of pin-definition

(MDI/MDI-X).

Button Function

Default Restore the factory default setting of WAP-3000

Reset Restart WAP-3000

DIP Switch

(WiFi / )

Select working mode (WiFi / Multimedia ).

Note: Multimedia mode is not supported on current version

Chapter 2 Configuration Utility Installation

Before you proceed with the installation, it is necessary that you have enough

information about the Wireless Access Point. Use the Procedure described in

below in this chapter to install under Windows 98/Me/2000/XP.

2.1 Windows 98/ME/2000/XP Installation

Note The following installation operates under Window 2000. Procedures will be similar for

Window 98/ME/XP

1. Connect WAP-3000 to PC or notebook’s USB port. Windows will detect your Access Point and ask

you click “Next” for driver installation.

2. When this dialog appears, please select the first option and click “Next” to continue.

3. Please insert Drivers and User’s Manual CD into your CD-ROM, then select “Specify a Location” and

Click “Next”.

4. Please set the driver source to WAP-3000 folder in Drivers and User’s manual CD. Suppose CD-ROM

is E:\, please set the path to E:\Drivers\WAP-3000 and click “Next”.

5. Windows will find WAP-3000 driver and may show you the screen below to prompt you the driver

doesn’t have Digital Signature. Please Click “Yes” to continue the installation of driver.

6. Please click “Finish” to complete the driver installation.

Inhaltsverzeichnis

Andere Planet Drahtloser Zugangspunkt Handbücher

Planet

Planet WBS-502AC Bedienungsanleitung

Planet

Planet WAP-1966 Bedienungsanleitung

Planet

Planet WNAP-7300 Bedienungsanleitung

Planet

Planet WNAP-7205 Bedienungsanleitung

Planet

Planet WDAP-802AC Bedienungsanleitung

Planet

Planet WDAP-2000PE Bedienungsanleitung

Planet

Planet WNAP-6305 Bedienungsanleitung

Planet

Planet WNAP-6308 Bedienungsanleitung

Planet

Planet WDAP-W7200AC Bedienungsanleitung

Planet

Planet WNAP-3000PE Bedienungsanleitung

Planet

Planet WAP-8000 Bedienungsanleitung

Planet

Planet WDAP-C1750 Bedienungsanleitung

Planet

Planet WNAP-7325 Bedienungsanleitung

Planet

Planet Wireless Access Point w/Bridge WAP-1963A Bedienungsanleitung

Planet

Planet WNAP-7350 Bedienungsanleitung

Planet

Planet WAP-7500 Bedienungsanleitung

Planet

Planet WAP-7000 Bedienungsanleitung

Planet

Planet WNAP-C3220E Bedienungsanleitung

Planet

Planet MAP-3120 Bedienungsanleitung

Planet

Planet WAP-4036 Bedienungsanleitung

Planet

Planet WDAP-W1200E Bedienungsanleitung

Planet

Planet WNAP-W2200UE Bedienungsanleitung

Planet

Planet WAP-4030A Bedienungsanleitung

Planet

Planet WAP-1000 WireFree Bedienungsanleitung

Beliebte Drahtloser Zugangspunkt Handbücher anderer Marken

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Bedienungsanleitung

Ubiquiti

Ubiquiti NanoStation NSM2 Bedienungsanleitung

Cisco

Cisco Aironet 1550 Series Bedienungsanleitung

Aruba

Aruba IAP-335 Bedienungsanleitung

Advantek Networks

Advantek Networks AWN-AP-54MR Bedienungsanleitung

IP-COM

IP-COM AP355 Bedienungsanleitung

Buffalo

Buffalo AirStation WLA-L11G Bedienungsanleitung

EnGenius

EnGenius EnStationACv2 Bedienungsanleitung

D-Link

D-Link DAP-3662 Bedienungsanleitung

xG Technology

xG Technology xMax CN1300 Bedienungsanleitung

Widelink

Widelink ezWave WAP-1100 Series Bedienungsanleitung

Edimax

Edimax CAP1200 Bedienungsanleitung

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Bedienungsanleitung

Aruba

Aruba AP-203R Bedienungsanleitung

LuXout Shades

LuXout Shades LUXSHADE MOTION Bedienungsanleitung

CreatComm

CreatComm TB5F Bedienungsanleitung

SineDigital

SineDigital MW-1500AP(H) Bedienungsanleitung

TP-Link

TP-Link AP9650 V1 Bedienungsanleitung