Planet WAP-4036 Bedienungsanleitung

802.11g Wireless Access Point

WAP-4036

Quick Installation Guide

Table of Contents

Package Content............................................................................. 3

Hardware Installation ...................................................................... 4

Initial Conguration......................................................................... 5

Further Conguration ...................................................................... 8

Package Content

1 x WAP-4036

1 x Power Adapter

1 x User’s Manual CD

1 x Quick Installation Guide

1 x External Antenna

1 x Ethernet Cable

Note

If any of the above items are missing or damaged,

contact your local dealer for support.

Hardware Installation

Before you proceed with the installation, it is necessary that you have

enough information about the WAP-4036.

Keep the access point as central in your work area as possible.

Signal strength and speed fall off with distance.

Higher is often better. For instance, set it up on the top shelf of a

bookcase rather than the bottom one, if possible.

Prior to connecting the hardware, make sure to power off your Ethernet

device and Wireless Access Point (AP). Then follow the steps below to

connect the related devices.

Step 1: Connect your computer to the LAN port of WAP-4036

by using RJ-45 cable. Attach one end of the Ethernet cable

with RJ-45 connector to your hub, switch or a computer’s

Ethernet port, and the other end to one of the LAN ports of

your AP.

Step 2: Assemble the antenna to WAP-4036. Try to place them

to a position that can best cover your wireless network. The

antenna’s position will enhance the receiving sensitivity.

Step 3: Connect the power adapter. Connect the single DC output

connector of the power adapter to the power jack on the side

of the AP. Then plug the Power Adapter into an AC outlet.

Step 4: Power on the following devices in this order: HUB or

Switch, AP, and PCs

ONLY use the power adapter supplied with the WAP-

4036. Otherwise, the product may be damaged. If you

want to reset your WAP-4036 to default settings, press

the Reset button 5 second. Then release the button and

wait for 10 seconds for rebooting.

Initial Conguration

1. Open your web browser.

2. Enter WAP-4036 IP address (default IP address is http://192.168.1.1)

into the address eld of the web browser. Please also make sure your

PC’s IP address is in the same IP range with WAP-4036.

Note

If the AP’s LAN port has been changed with new IP

address, enter the new IP address instead.

3. A User Name and Password dialog box will appear. Please enter your

User Name and Password here. The User Name and Password are

“admin” by default. Click “OK” to access the management page.

4. Once you log in, the Conguration Wizard and Status page will pop

up at the same time. Conguration Wizard will appear every time

you enter WAP-4036. If you do not want to display wizard by itself

next time, select “don’t pop up” option and click “save”. In the

future, you can still have wizard appeared by clicking “Wizard” tab

on upper right panel of WAP-4036’s web page.

Click “Start” to go to next step.

Note

In order to start the wizard, you will need to have the

pop-up blocker DISABLED in your web browser.

5. On this page, you can set the Radio Band, Mode, SSID and Channel

to your WAP-4036. The SSID is to identify your wireless network.

All the devices (AP and wireless client) on the same wireless network

must be congured to the same SSID.

You can leave the Radio Bnad and Channel settings to default. On

the Mode Settings, the default is AP mode which allow your wireless

client to connect each other and the wired Ethernet network. Please

refer to the user’s manual for detial on other available modes.

Click “Next” to proceed.

6. You have nished all basic congurations for WAP-4036. Please press

“Exit” to close this window. The WAP-4036 will perform reboot if

major changes are made. After reboot completes, the WAP-4036 is

ready to use.

Further Conguration

If you want to congure more detail settings of WAP-4036, please refer

to the manual in the bundled CD. If you have any difculty on resolving

the problem while installing or using the WAP-4036, please feel free to

contact PLANET for support.

Inhaltsverzeichnis

Andere Planet Drahtloser Zugangspunkt Handbücher

Planet

Planet WNAP-7350 Bedienungsanleitung

Planet

Planet WDAP-702AC Bedienungsanleitung

Planet

Planet RTL8812AU-CG Bedienungsanleitung

Planet

Planet Wireless Access Point w/Bridge WAP-1963A Bedienungsanleitung

Planet

Planet WNAP-6306 Bedienungsanleitung

Planet

Planet WNAP-C3220E Bedienungsanleitung

Planet

Planet WDAP-C7200E Bedienungsanleitung

Planet

Planet WDAP-W7200AC Bedienungsanleitung

Planet

Planet WAP-4033 Bedienungsanleitung

Planet

Planet WNAP-6305 Bedienungsanleitung

Planet

Planet IAP-2000PS Bedienungsanleitung

Planet

Planet MAP-3120 Programmierhandbuch

Planet

Planet 802.11g Wireless Access Point / Bridge... Bedienungsanleitung

Planet

Planet WAP-4030A Bedienungsanleitung

Planet

Planet Network Device WAP-4033PE Bedienungsanleitung

Planet

Planet WDAP-C3000AX Bedienungsanleitung

Planet

Planet WNAP-7300 Bedienungsanleitung

Planet

Planet WAP-1960 Bedienungsanleitung

Planet

Planet WAP-1966 Bedienungsanleitung

Planet

Planet WAP-1965 Bedienungsanleitung

Planet

Planet WNAP-W2200UE Bedienungsanleitung

Planet

Planet WAP-2000 Bedienungsanleitung

Planet

Planet WNAP-6325 Bedienungsanleitung

Planet

Planet WAP-252N Bedienungsanleitung

Beliebte Drahtloser Zugangspunkt Handbücher anderer Marken

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Bedienungsanleitung

Ubiquiti

Ubiquiti NanoStation NSM2 Bedienungsanleitung

Cisco

Cisco Aironet 1550 Series Bedienungsanleitung

Aruba

Aruba IAP-335 Bedienungsanleitung

Advantek Networks

Advantek Networks AWN-AP-54MR Bedienungsanleitung

IP-COM

IP-COM AP355 Bedienungsanleitung

Buffalo

Buffalo AirStation WLA-L11G Bedienungsanleitung

EnGenius

EnGenius EnStationACv2 Bedienungsanleitung

D-Link

D-Link DAP-3662 Bedienungsanleitung

xG Technology

xG Technology xMax CN1300 Bedienungsanleitung

Widelink

Widelink ezWave WAP-1100 Series Bedienungsanleitung

Edimax

Edimax CAP1200 Bedienungsanleitung

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Bedienungsanleitung

Aruba

Aruba AP-203R Bedienungsanleitung

LuXout Shades

LuXout Shades LUXSHADE MOTION Bedienungsanleitung

CreatComm

CreatComm TB5F Bedienungsanleitung

SineDigital

SineDigital MW-1500AP(H) Bedienungsanleitung

TP-Link

TP-Link AP9650 V1 Bedienungsanleitung