Planmeca ProSensor Bedienungsanleitung

10019763_11

Digital Radiography System

user's manual

Planmeca ProSensor 1

TABLE OF CONTENTS

User’s Manual

1 INTRODUCTION ..............................................................................................1

2 SYMBOLS ........................................................................................................2

3 RELATED MANUALS ......................................................................................2

4 SAFETY PRECAUTIONS ................................................................................3

5 SYSTEM REQUIREMENTS .............................................................................4

6 PLANMECA PROSENSOR CONTROLBOX INDICATOR LIGHT ..................5

7 BEFORE EXPOSURE ......................................................................................6

7.1 Positioning the patient .................................................................................................... 6

7.2 Positioning the sensor .................................................................................................... 6

7.3 Selecting exposure values ............................................................................................. 8

8 CAPTURING INTRAORAL IMAGES .............................................................10

8.1 Capturing single intraoral images ................................................................................ 10

8.2 Capturing images into a study template ....................................................................... 12

9 IMAGE QUALITY CONTROL .........................................................................14

9.1 Quality check using SMPTE test pattern ..................................................................... 14

10 USING THE SENSOR HOLDERS ..................................................................14

11 CLEANING .....................................................................................................15

11.1 Surfaces ....................................................................................................................... 15

11.2 Sensors and cables ..................................................................................................... 15

11.3 Sensor holders .............................................................................................................16

11.4 Planmeca ProSensor ControlBox ................................................................................ 16

12 DISPOSAL OF PLANMECA PROSENSOR ..................................................17

13 TECHNICAL SPECIFICATIONS ....................................................................18

APPENDIX A: EXPOSURE VALUES FOR PLANMECA PROX ...................20

A.1 Default exposure values .............................................................................................. 20

A.2 Preprogrammed settings values .................................................................................. 21

TABLE OF CONTENTS

2 Planmeca ProSensor User’s Manual

Planmeca pursues a policy of continual product development. Although every

effort is made to produce up-to-date product documentation this publication

should not be regarded as an infallible guide to current specifications. We

reserve the right to make changes without prior notice.

Publication number 10019763 Revision 11

Released 21 November 2013

The manufacturer, assembler, and importer are responsible for the safety,

reliability and performance of the unit only if:

- installation, calibration, modification and repairs are carried out by qualified

authorized personnel

- electrical installations are carried out according to the appropriate

requirements such as IEC 60364

- equipment is used according to the operating instructions

Planmeca ProSensor 1

INTRODUCTION

User’s Manual

1 INTRODUCTION

This manual describes how to use and install the

Planmeca ProSensor sensor that is intended to be used

for capturing digital intraoral x-ray images from patient’s

jaw, teeth, gums, roots and root canals by trained dental

care professionals.

Please read this manual carefully before using the

system.

Planmeca ProSensor automatically triggers and captures

images to the start and end of the x-ray radiation so that

any intraoral x-ray unit supporting exposure times and

cones listed in tables of chapter “Exposure values for

Planmeca ProSensor” can be used.

The Planmeca Romexis imaging software or third party

software stating compatibility with Planmeca ProSensor

or software stating compatibility through TWAIN can be

used for image capturing.

Planmeca ProSensor is connected to a computer using

Ethernet or USB interface and it supports Windows and

MAC operating systems, see details in section

“TECHNICAL SPECIFICATIONS” on page 18.

This manual is valid for following software revisions:

• Planmeca ProSensor Ethernet software version 2.1.0.R

or later

• Planmeca ProSensor USB software version 2.2.1.R or

later

• Didapi software version 4.8.1or later.

SYMBOLS

2 Planmeca ProSensor User’s Manual

2 SYMBOLS

Type BF equipment (Standard IEC 60601-1).

Attention, consult accompanying documents

(Standard IEC 60601-1).

The use of accessory equipment not complying with the

equivalent requirements of this equipment may lead to a

reduced level of safety of the resulting system.

Consideration relating to the choice shall include:

• use of the accessory in the Patient Vicinity

• evidence that the safety certification of the accessory has

been performed in accordance to appropriate IEC60601

and/or IEC60601-1-1 harmonized national standard.

Planmeca ProSensor is ETL classified and conforms to

ANSI/AAMI ES60601-1 and is certified to CAN/CSA

C22.2 No. 60601.1:08.

Separate collection for electrical and electronic equipment

according to Directive 2002/96/EC (WEEE)

3 RELATED MANUALS

This manual should be used in conjunction with following

manuals:

• Planmeca ProX User’s manual (10029963)

• Planmeca Romexis User’s manual (10014593)

3143029

ETL CLASSIFIED

Planmeca ProSensor 3

SAFETY PRECAUTIONS

User’s Manual

4 SAFETY PRECAUTIONS

NOTE The system should be operated by qualified

personnel only.

NOTE EMC requirements have to be considered, and the

equipment must be installed and put into service

according to the specific EMC information provided

in the accompanying documents.

CAUTION Handle the Planmeca ProSensor according

to the instructions given in this manual. Do

not pinch the sensor or the cable. Do not to

drop the sensor or pull strongly the sensor

cable. Never cut, nick or sharply bend the

sensor cable. Always advise the patient not

to bite the sensor or the cable. The

Planmeca limited warranty does not cover

damage which is due to misuse, e.g.

dropping the sensor, neglect, or any cause

other than ordinary application.

CAUTION Do not let the sensor cable run along the

floor. Protect the cable from rolling over it

with a chair or walking over it.

CAUTION Do not store or use the Planmeca Sensor

near (3m or 10 ft) an electrosurgical knife.

CAUTION Do not unnecessarily touch the connector

pins to keep them clean.

SYSTEM REQUIREMENTS

4 Planmeca ProSensor User’s Manual

5 SYSTEM REQUIREMENTS

NOTE The PC and other equipment connected to the system

must be:

• approved by local authorities: e.g. IEC-approved (CE

marked), UL / CSA approved

• located outside the patient area (more than 2m (79 in.)

from the X-ray unit)

• protectively earthed.

NOTE The connection of additional equipment to a multiple

portable socket-outlet must only be possible by using

a tool or be supplied via separating transformer.

NOTE The multiple portable socket-outlets shall not be

placed on the floor.

NOTE Make sure that the system is protected with fire wall

and up-to-date anti-virus software. If possible, isolate

the system from office network.

NOTE For latest up-to-date system requirements see also

Planmeca website > Software > System requirements

Table 1. Planmeca Romexis system requirements

Planmeca Romexis

client work station

Planmeca Romexis

database server

Processor Intel Core 2 Duo 2 GHz or better Intel Core 2 Duo 3GHz or better

RAM 3 GB 3 GB minimum

Hard disk space 80 GB 2 x 500 GB (RAID/mirroring)

Graphics card Any integrated or dedicated Any

USB port USB port 2.0 USB port 2.0

Monitor 1280 x 1024 1280 x 1024

Peripherals CD-ROM drive CD-ROM drive

Backup medium None necessary DAT or equivalent

Operating system

Windows XP Pro (32 bit)

Windows Vista Pro (32 or 64 bit)

Windows 7 Pro (32 or 64 bit)

Windows 8 Pro (32 or 64 bit)

Mac OS X (Intel)*

Windows XP Pro (32 bit)

Windows 2003 Server (32 or 64)

Windows 2008 Server (32 or 64)

Windows Vista Pro (32 or 64)

Windows 7 Pro (32 or 64)

Windows 8 Pro (32 or 64)

Mac OS X (Intel)

Other Java platform (Java Virtual

Machine 1.6)

Java platform (Java Virtual

Machine 1.6)

Planmeca ProSensor 5

PLANMECA PROSENSOR CONTROLBOX INDICATOR LIGHT

User’s Manual

6 PLANMECA PROSENSOR CONTROLBOX INDICATOR

LIGHT

Table 2. Planmeca ProSensor ControlBox indicator light explanation

NOTE The exposure can only be taken when the Planmeca

ProSensor ControlBox indicator light is green and

steady, not when the indicator light is flashing.

CONTROLBOX INDICATOR LIGHT PLANMECA PROSENSOR STATUS

Off Planmeca ProSensor system power off

Dim blue

Planmeca ProSensor system is off (not in

intraoral exposure-mode and the cable is

connected to the ControlBox)

Bright blue

Planmeca ProSensor system is on (Imaging

program communicates with the Planmeca

ProSensor system)

Slowly flashing blue Waiting for Ready

Steady green Waiting for Exposure

Rapidly flashing green The exposure is taken and image is

transferred from the sensor to the ControlBox

Steady red Error mode

Slowly flashing yellow Service mode

Uploading ControlBox software

Slowly flashing blue, turns to slowly flashing

dim blue, then to quickly flashing dim blue Reading calibration files from the sensor.

Flashing violet ControlBox startup with back-up software

control_box_2.eps

Planmeca

indicator light

ProSensor

BEFORE EXPOSURE

6 Planmeca ProSensor User’s Manual

7 BEFORE EXPOSURE

NOTE Detailed instructions for using Planmeca ProX X-ray

unit and Planmeca Romexis software are given in

their User’s manual, which should be used in

conjunction with this manual.

NOTE It is recommended to use a sensor holder. Select the

correct sensor holder according to the type of

exposure, refer to the sensor holder manual supplied

with the sensor holder package.

NOTE In case the environment temperature reaches 40°C

the sensor surface warms up to its maximum

temperature of 49°C and may feel warm. The surface

temperature of the sensor cools off when in patient

contact.

7.1 Positioning the patient

Ask the patient to sit down. Place a protective lead apron

over the patient’s chest.

7.2 Positioning the sensor

When using the sensor for the first time the message

Loading calibration files will appear on the Romexis

window.

NOTE When connecting the same sensor to another

workstation the calibration files will be reloaded.

Select the appropriate sensor and connect it to the

Planmeca ProSensor ControlBox.

Paralleling technique (recommended)

The sensor is placed to a sensor holder which is used to

align the sensor parallel to the long axis of the tooth.

Use a long cone for the paralleling technique.

Sensor

Long axis

of the tooth

Inhaltsverzeichnis

Andere Planmeca Medizinische Geräte Handbücher

Planmeca

Planmeca INTRA X-RAY UNIT Bedienungsanleitung

Planmeca

Planmeca ProMax 3D Mid Bedienungsanleitung

Planmeca

Planmeca Prostyle Intra Bedienungsanleitung

Planmeca

Planmeca PlanMill 60 S Bedienungsanleitung

Planmeca

Planmeca intra Bedienungsanleitung

Planmeca

Planmeca SingLED Bedienungsanleitung

Planmeca

Planmeca ProOne Bedienungsanleitung

Planmeca

Planmeca intra Bedienungsanleitung

Planmeca

Planmeca Sovereign Classic Bedienungsanleitung

Planmeca

Planmeca ProMax Bedienungsanleitung

Planmeca

Planmeca Planmeca ProMax 3D s Bedienungsanleitung

Planmeca

Planmeca ProOne Gebrauchs- und Pflegehandbuch

Planmeca

Planmeca ProMax Pan/Ceph Gebrauchs- und Pflegehandbuch

Planmeca

Planmeca ProOne Bedienungsanleitung

Planmeca

Planmeca ProOne Bedienungsanleitung

Planmeca

Planmeca Proline EC Panoramic Bedienungsanleitung

Planmeca

Planmeca PlanMill 40 S Bedienungsanleitung

Planmeca

Planmeca 2D S2 Bedienungsanleitung

Planmeca

Planmeca ProMax X-ray Bedienungsanleitung

Planmeca

Planmeca Proline XC Bedienungsanleitung

Planmeca

Planmeca intra Bedienungsanleitung

Planmeca

Planmeca PlanMill 50 S Bedienungsanleitung

Planmeca

Planmeca 2D Bedienungsanleitung

Planmeca

Planmeca ProMax 3D Plus Bedienungsanleitung

Beliebte Medizinische Geräte Handbücher anderer Marken

TekTone

TekTone Tek-CARE160 Bedienungsanleitung

NeuroMetrix

NeuroMetrix Quell 2.0 Bedienungsanleitung

AMT

AMT XLR8 Bedienungsanleitung

Medipost-Nutristoma

Medipost-Nutristoma MD300K2 Bedienungsanleitung

EDAN

EDAN SONOTRAX Pro Bedienungsanleitung

Restorative Therapies

Restorative Therapies RT300 Bedienungsanleitung

Gendex

Gendex Expert DC Bedienungsanleitung

Dexcowin

Dexcowin ADX4000W Bedienungsanleitung

Libelium

Libelium MySignals Bedienungsanleitung

Acelity

Acelity V.A.C.ULTA 4 Bedienungsanleitung

Caputron

Caputron ActivaDose II tDCS Bedienungsanleitung

FujiFilm

FujiFilm Sonart Betriebsanleitung

Plinth 2000

Plinth 2000 93CDT Bedienungsanleitung

GE SENOGRAPHE 800T Bedienungsanleitung

GE Definium 5000 Bedienungsanleitung

Kanmed

Kanmed GE-1380 Bedienungsanleitung

Huntleigh

Huntleigh FD1 Bedienungsanleitung

Stryker

Stryker SPR Plus Bedienungsanleitung