Plantronics BT300 Bedienungsanleitung
GUIDE DE DÉMARRAGE RAPIDE
GUÍA DE INICIO RÁPIDO
GUIA DE INÍCIO RÁPIDO
QUICK START GUIDE
B230 Bluetooth System
Voyager®PRO UC v2
BT300
en
Micro USB
Charger
BT300 USB Adapter
Voyager PRO UC
USB Charging Cable
Soft Gel Eartips (Small & Large) and
Foam Eartip Covers
Carry Case
What’s in the box
en
en
Headset controls
345
12
1 Volume/Mute button
Increase/decrease volume
Mute mic during a call
Pause/Play streaming audio
Tap + or – button per level change
1-second press of both + and – buttons
1-second press of both + and – buttons
2Call button
Take a call or end it
Call back last call
Initiate phone’s voice-dialing
Reconnect lost connection
1 tap
2 taps
2-second press until tone heard
1 tap
3 Micro USB charging port 90 minutes for full charge
4 Power button
On or off
Talk time voice alert
Activate pairing mode
2-second press
1 tap
With headset off press until LED flashes red/blue
5 LED
Charging
Battery status
Pairing mode
Solid red. When fully charged, LED is off.
Low = 2 red flashes, Recharge = 3 red flashes
Flashes red/blue
AUTO CALL ANSWER:automatically answer a mobile or softphone call by putting on the
headset. You do not have to press the call button. See Smart Sensor Features.
#1 change
Smart Sensor Features
Auto Answer Call:
When you are not wearing
your headset.
When you have an incoming call on
your mobile or softphone, put on the
headset and the call will be answered
automatically. You do not have to
press the call button.
Auto Pause Media:
When you are listening to
streaming audio.
When you are streaming audio from
your mobile phone or PC. Remove
the headset and the streaming audio
pauses. Place your headset back on
and the audio resumes.
NOTE If the media player has been
playing less than 10 seconds you will have
to manually restart the media player.
Auto Transfer Call:
Whether you are wearing your
headset or not.
If you are not wearing your headset
and there is an incoming call on
your mobile phone, the audio will be
routed to the mobile phone. When
you put the headset on, the audio will
be automatically transferred to the
headset and will auto answer.
If you are already wearing your
headset and there is an incoming call,
the audio will be routed to the headset
and you will need to press the call
button to answer the call.
Auto Lock Call Button:
When you are not wearing
your headset
Prevents accidental dialling from your
mobile phone.
NOTE These features are enabled by default and can be disabled in the
Plantronics Control Panel: Devices>Device Settings>Headset Tab. Changes to the
device settings requires that you are connected and within range of the USB
adapter. The Plantronics software must be downloaded to access the Control
Panel. Refer to Step 1 Set up your headset and computer.
#3 change
#2 change
#4 change
en
en
Step 2 Connect your headset and USB adapter
Pair your headset
VoyagerPRO UC v2
Ready1
Activate the Bluetooth feature on your phone, then use the phone’s settings
to add/search/discover new Bluetooth devices.
BlackBerry® Settings/options > Bluetooth: On > Search for devices.
iPhone Settings > General > Bluetooth > On (starts the search for devices)
Android Phone Settings > Wireless > Bluetooth: On > Scan for devices
Set2
To activate Bluetooth pairing mode, press and hold the power button until
LED flashes red/blue to indicate pairing mode.
Connect3
Select• Voyager PRO UC from the list of Bluetooth devices shown on your
phone.
If phone asks for a passcode, enter four zeros• 0000. You may see **** on
screen.
Some phones also ask to confirm headset connection after pairing.•
Headset LED will stop flashing red/blue once your phone and headset are•
successfully paired/connected.
Step 1 Set up your headset and computer
Install the software
Download and install the Plantronics software at plantronics.com/software.
NOTE You must be connected to the internet in order to access the software.
Once the software is installed, Windows users can access the utility by
selecting Start > Programs > Plantronics > Plantronics Control Panel.
Charge your headset
To calibrate your headset and provide optimal
performance fully charge the headset before using.
The headset LED will be solid red to indicate that
the headset battery is charging. When fully charged
the LED goes off.
NOTE To charge the headset with USB charging cable the PC must be on and in
an active state.
Reset Smart Sensors
To reset the Smart Sensors, connect the headset to the charger and place the
headset on a flat nonmetallic surface for 10 seconds.
30 min ...........................
Minimum charge
before first use
1.5 hours ......................................
Full charge
#5 change
en
en
Step 3 Fit your headset
The headset comes configured for the right ear, with the medium eartip
installed, however you can replace it with the small or large eartip provided.
For the best sound clarity and comfort, make sure you have a secure fit.
Replace the eartip for a better fit
Grip the eartip and gently push it into the speaker housing.1
Rotate it a quarter turn to the left to unlock.2
Pull the eartip away from the headset.3
2
13
Attach a new eartip
Align the tabs on the eartip with the slots on the speaker housing.4
Gently push the eartip into housing while turning it a quarter turn to the5
right. The eartip will stop rotating when it is locked.
You may want to add a foam eartip cover for additional comfort.
4
4
5
USB adapter set-up
Your Bluetooth adapter is pre-paired to your headset.
NOTE refer to the complete user guide located at plantronics.com/support if you
need to re-pair. On the support page, click the Product Documentation tab and then
enter the model number or product name in the search field.
Power on the headset1
Insert the USB adapter directly into the laptop or PC.2
NOTE Do not insert directly into a docking station.
The LED will become solid blue to indicate the adapter is powered on and is
connected to the headset.
USB Adapter LED indicators
Headset powered off None
Paired/connected Solid blue
Active call Flashing blue
Streaming audio Flashing blue
en
en
Step 4 Making calls with your softphone
You can make softphone calls with your computer using your Bluetooth
adapter which comes automatically paired with your headset.
Ensure the headset is powered on.1
Insert the USB adapter into USB Port on the PC. The LED on the adapter will2
flash blue to indicate the adapter is connecting to the headset. The LED will
become solid blue to indicate the adapter is powered on and is connected to
the headset.
Check the audio settings in the softphone application to make sure that the3
speaker and microphone are set to the BT300 adapter.
To place a call using your softphone, dial the number or choose a contact4
using your softphone program. The audio connection to your headset will
activate automatically when your recipient’s phone begins to ring. The LED
on the adapter will slowly flash blue while you are on an active call.
Learn More
To learn more about your system features, change default settings or read
troubleshooting tips, refer to the user guide online at plantronics.com/
documentation. You can also view online FAQ at plantronics.com/support.
Technical support is available at USA: 1.866.363.BLUE (2583).
Wearing the headset
Guide the earloop behind your ear and position the headset so that the1
speaker and eartip rest comfortably in your ear.
Pivot the boom up to point the microphone toward the corner of your mouth.2
1
2
Quick-turn adjustment for the left ear
Pivot the boom into an upright position.1
Rotate the boom and speaker to the other side of the headset and lower it2
before fitting your other ear.
2
1
#6 change
Andere Handbücher für BT300
1
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere Plantronics Kopfhörer Handbücher
Plantronics
Plantronics backbeat FIT 300 series Bedienungsanleitung
Plantronics
Plantronics Backbeat FIT Bedienungsanleitung
Plantronics
Plantronics DISCOVERY 925 Bedienungsanleitung
Plantronics
Plantronics BackBeat GO 810 Series Bedienungsanleitung
Plantronics
Plantronics Voyager PRO UC v2 Bedienungsanleitung
Plantronics
Plantronics Bluetooth Headset none Bedienungsanleitung
Plantronics
Plantronics BackBeat FIT 500 Series Bedienungsanleitung
Plantronics
Plantronics BackBeat FIT 350 Series Bedienungsanleitung
Plantronics
Plantronics BackBeat FIT 3200 Series Bedienungsanleitung
Plantronics
Plantronics Backbeat FIT Bedienungsanleitung
Plantronics
Plantronics backbeat FIT 300 series Bedienungsanleitung
Plantronics
Plantronics BACKBEAT 216 - QUICK START GUIDES Bedienungsanleitung
Plantronics
Plantronics Backbeat Go 2 Bedienungsanleitung
Plantronics
Plantronics BackBeat 903+ Bedienungsanleitung
Plantronics
Plantronics .Audio 995 Bedienungsanleitung
Plantronics
Plantronics CS70 Series Referenzhandbuch
Plantronics
Plantronics BackBeat 100 series Bedienungsanleitung
Plantronics
Plantronics BackBeat 903+ Technisches Handbuch
Plantronics
Plantronics RIG 500 PRO Series Bedienungsanleitung
Plantronics
Plantronics Voyager Focus UC Bedienungsanleitung
