Plextor PX-EH Bedienungsanleitung
2
1
16 7
1
2
3
Turn off the POWER switch on the rear of the
PX-EH.
If the switch is already off, turn it on and then off again.
IMPORTANT!
If you have the above environment, turn this
page to proceed to page 2.
PX-EH Series
Quick
Setup Guide
Before Setting Up...
Check the model of your PX-EH.
PX-EH Series
Straight LAN Cable Manual CD-ROM
AC Adapter Power Cable
Important Infomation Quick Setup Guide
Check the computer you are using.
Confirm that a LAN interface is installed and
operating properly.
When Turning Off the Power...
The shut down will start.
Check the POWER lamp (green) on the front of the PX-EH.
Power off
nStart blinking oTurn off
All unsaved data are
written to the internal or
external hard disk drive.
Please wait.
(Shut down is started) (Shut down is complete)
When the shut down is complete, the power will be cut off
automatically and the POWER lamp will turn off.
zIf an external hard disk or printer is connected, turn off its power by
following the order below: Turn off the power to the PX-EH by following
steps 1 to 3 above ÎTurn off the power to the external hard disk or
printer.
zWe recommend that you disconnect the power cable from the power
socket if the PX-EH will not be used for a prolonged period.
If you already have the environment
specified below, you can start using your
PX-EH simply by making the necessary
connections.
You need a network having a DHCP server* equipment (broadband
router, router-type DSL modem, etc.), as illustrated below.
Wired
network
Wireless
network
Broadband router
that functions as a
DHCP server
Modem Internet
Hub
PX-EH
* What is the DHCP server?
The DHCP server is an equipment that can automatically assign the IP address to a computer or other equipment
on the network.When the PX-EH is connected to a network having a DHCP server, the IP address will be
automatically assigned to your PX-EH. Once the IP address is assigned, the PX-EH can be used on the network.
(The default setting of your PX-EH allows it to automatically obtain the IP address from a DHCP server).
If you don't have the network environment specified above, are using a Mac computer, or want to add a shared user,
refer to the Online Manual provided in the CD-ROM.
(Turn this page for an explanation on how to read the Online Manual.)
FAQ http://www.plextor.com/english/support/support_faqs.html
RMA http://www.plextor.com/english/support/support_warranty.html
E-mail [email protected]
Tel 510.440.2000
1
1
1 2
3 4
2
3
2
2 3 4 5
1
2
Connecting the PX-EH to a network.
zThis PX-EH is designed for installation in vertical orientation.
Do not install it horizontally, as it may cause breakdown.
zConnect the PX-EH after confirming that the DHCP server is operating.
Set the MDI/MDI-X selector switch on the rear of the PX-EH in accordance
with the network equipment to which the PX-EH is connected.
Connected network equipment
MID-X port of
computer or hub Hub
MDI-X MDI
MDI/MDI-X selector switch
Connect one end of the supplied LAN cable to the LAN port of the PX-EH,
and then connect the other end to the network equipment.
Connect one end of
the LAN cable to the
LAN port on the rear of
the PX-EH.
Connect the
other end to
the network
equipment.
Network
equipment
Always turn on the power to the PX-EH after confirming that the LAN
cable is securely connected. If the PX-EH is powered up before the
LAN cable is connected, the PX-EH cannot participate in the network
properly.
Selector
Switch
LAN port
Turn on the power.
Connet the AC Adapter to DC of the PX-EH and
the power socket.
Turn on the POWER switch located on the rear
of the PX-EH. If the switch is already on, such as
when the PX-EH was shut down from the setup
screen after the last session, turn off the switch
and then turn it back on.
The PX-EH has been powered up when the POWER lamp on the
front of the PX-EH turns to a steady green light.
If the POWER lamp does not turn to a steady green light, refer to
"Troubleshooting in the Online Manual" provided separately.
Power on
The blinking period will
vary depending on the
condition of the PX-EH.
oStart blinking
nTurn on briefly
pSteady light
Approx.
15 seconds
A steady green color of the POWER lamp indicates that the
setup is complete!
You can now use your PX-EH.
While the PX-EH is operating, do not turn off the power by
disconnecting the power cable or turning off the AC tap with switch
without completing the shut down process. Doing so may result in
breakdown or cause loss of data.
Access the PX-EH.
Example of accessing from a Windows XP computer
Click Start, right-click My Network
Places, and then click Search for
Computers.
Enter “PX-EH” under Computer
name, and then click the
Search button.
Double-click PX-EH series “PX-
EH”, which will be found as a result
of search.
Double-clicking the disk folder
will open the usable folders in
the PX-EH.
Click
Click
Enter “PX-EH”
Double-click
Double-click
When a file is copied to this window, it will be saved in the PX-EH folder. You also
can access the PX-EH on a computer running other operating software by finding
PX-EH. For details, refer to the Online Manual provided in the CD-ROM.
How to Read the Online Manual
The Online Manual is provided as a HTML document.
We recommend that you view the Online Manual in Internet Explorer Version 5.0 or higher.
Windows
Set the supplied CD-ROM in your computer.
The menu will be displayed automatically.
If the menu is not displayed automatically, open the CD-ROM from
My Computer, etc., and then double-click top.htm
n
o
Mac
Set the supplied CD-ROM in your computer.
When the CD icon is displayed, double-click the icon.
Double-click top.htm
n
o
p
Tip
When you open online manual on Windows XP SP2, a pop-up
message, "Information Bar", may appear.
If it appear, please check "Do not show this message again" and
click "OK". Online Manual will be displayed.
Please click information bar between the toolbar and the content
window in Internet Explorer and click "Allow Blocked Content...".
Another pop-up meassage, "Security Warning", appear.
Please click "Yes". You can operate an online manual properly.
dClick
Click
cCheck
Click
Dieses Handbuch passt für folgende Modelle
3
Andere Plextor Netzwerkspeicherserver Handbücher
Beliebte Netzwerkspeicherserver Handbücher anderer Marken
HP
HP NetStorage 6000 Bedienungsanleitung
Seagate
Seagate U10 ST320423A Bedienungsanleitung
Synology
Synology RackStation RS816 Handbuch
D-Link
D-Link ShareCenter Pro DNS-1200-05 Bedienungsanleitung
Avid Technology
Avid Technology VideoRAID ST Sicherheitsleitfaden
Western Digital
Western Digital My Cloud Home Duo Bedienungsanleitung
PrimeArray
PrimeArray 4xxx Bedienungsanleitung
Buffalo
Buffalo TeraStation WSS WSH5010N6 Bedienungsanleitung
Planex
Planex MZK-NAS01SG Bedienungsanleitung
Intel
Intel SS4000-E - Entry Storage System NAS Server Bedienungsanleitung
Synology
Synology RS2212+ Bedienungsanleitung
Allnet
Allnet ALL69000 Bedienungsanleitung
