PNI SafeHouse HS550 Bedienungsanleitung

Sistem de alarma fara fir

PNI SafeHouse HS550

Wifi GSM 3G

PNI SafeHouse HS550 WIRELESS 3G

alarm system

Manual de utilizare / User manual

RO Manual de utilizare..................... 2

EN User manual ............................... 22

WARNING

Please read this user manual carefully before using the product.

To set up and use the alarm system correctly, we recommend that you read this manual

thoroughly and carefully. Conguring and installing this system requires basic technical

knowledge, IT and PC, in order to understand and interpret the technical terms and

procedures correctly.

Start with simple, step-by-step settings and test them after setup. Do not change settings

and parameters that you do not understand and already know.

1. FEATURES AND GENERAL INFORMATION

■ Voice announcement

■ Multi-language

■ Built-in Siren and External Siren

■ 3 Hardwire Zones (EOLR)

■ Up to 90 Wireless Zones and Keys

■ Event Log Storage

■ Phone Number

■ Built-in Case Tamper

■ GSM/3G Cellular and Wi-Fi Communications

■ Support Up to 8 Smart Sockets

■ Up to 10 RFID tags

■ Exit Alarm

■ Sensors Low Battery Alarm

■Burglary Protection

Your system provides two modes of burglary protection: STAY and AWAY. STAY mode

protects the perimeter only, allowing you to freely move inside the premises. AWAY mode

protects the entire system. Both modes provide an entry delay time that allows you to

reenter the premises without setting off an alarm.

■Zones

Your system’s sensing devices have been assigned to various “zones.” For example,

the sensing device on your entry/exit door may have been assigned to zone 01, sensing

devices on windows in the master bedroom to zone 02, and so on. These numbers

appear on the display when an alarm or trouble condition occurs.

■Exit/Entry Delays

Your security system has been programmed with delay times that allow you to exit the

premises after arming, and to disarm the system upon entry, before an alarm occurs. If

you leave the premises too late when exiting, or disarm too late when arriving home, it

will cause a false alarm. If an alarm occurs, you should disarm the system immediately.

■Alarms

When an alarm occurs,both the built-in and external sounders will sound until the system

is disarmed or until alarm bell timeout occurs, and a message on the display will identify

the zone(s) causing the alarm.

Your system may also have been programmed to automatically send alarm messages

and voice via the cellular/GSM/GPRS/3G network, and push alarm notication to your

mobile app.To stop the alarm sounding,you simply disarm the system.

2. SYSTEM OVERVIEW

2.1 Control panel description

Index Item Description

1 Display Window 2.4 TFT Display screen. Displays system

status icons and information, time, zone(s)

alarm information, user menus.

2Speaker Alarms and conrmation sounds.

3 Panic Key Press to generate a Panic Alarm in case of

re or personal emergency.

4 Away/Stay Arm Button Press to arm the entire burglary

system,perimeter and interior.

Press twice to arm perimeter portion

programmed for “Stay Arm Active” of

burglary system only.Interior protection is

not armed,which allows movement within

premises without causing alarm.

5Disarm Button Press to disarm the system and to clear

alarm.

Press twice to clear trouble display of

accessories.

butons

Scroll Up/Function/Page Up

Button

Scroll down to the desired function or menu.

7Down/Backspace/Page

Down Button

Scroll down to the desired function or menu.

8 Cancel/Back Button Return to the previous screen.

9 Enter Button Select option or enter to the next screen.

10 RFID Zone Touch TAG to Arm/Disarm System

About the Backlight Indicators of Panic Key

What you see What it it means

Blinking alternately System is in Alarm

Pulse System is Armed

Steady System is Disarmed

2.2 Wiring overview

Index Description

1 Power Supply plug

2Backup Battery Switch

3 SIM card socket

4 EOLR Hardwired Zones Connections, refer to section 2.3 and the

Hardwired Zones Connections diagram

5 Tamper switch

2.3 Hardwired Zone Connections

Zone 1, Zone 2 and Zone 3 are the EOLR supervised zones that supports both open

circuit and closed circuit devices and has a response time of 300msec. Maximum zone

resistance: 11000 ohms, plus EOLR

Connect closed circuit devices in series in the high (+) side of the loop. The EOL resistor

must be connected in series with the devices, following the last device.

Connect open circuit devices in parallel across the loop. The 10000-ohm EOLR must be

connected across the loop at the last device.

Refer to the Hardwired Zones Connections diagram.

the Hardwired Zones Connections Diagram

EOLR(End of Line Resistor): If the EOLR is not at the end of the loop, the zone will not be properly

supervised, and the system may not respond to an open circuit on the zone.

2.4 Home Screen

2.5 Home Screen description

GSM

Status

SIM

No SIM card present or SIM card faulty

GPRS

Connected to server

GSM

RSSI level signal strength

Signal strength is displayed by a series of 1 to 5

bars ( weak to strong) , and bars are gray if

not registered with cell network

10K

EOLR

Z1 GND

Z2 GND

Z3 GND

10K

EOLR

10K

EOLR

2018-01-02

Tuesday

Please exit

3 4 5 6 7 8

Top Status

Bar

WIFI

Wi-Fi Status

WIFI

Indicates that the system is connected to a

WiFi source and the signal strength.

Indicates that the system is connected to the

server if dot is displayed.

GSM

SMS Sending

Calling

Keypad Locked

Power Status

AC Powered

0~3 bars

Displayed when the system has lost AC

power.

The icon is red when the system’s backup

battery power is low.

Clock 08:45 Real-time Clock

Arm/Disarm

Status Area

Date, time and week

Arm/Disarm

Status

System is Armed Away.

System is Armed Stay.

System is Disarmed.

System

Status

Display

Area

Ready 08:45 Clock

Countdown

“Please exit”

Countdown Bar

Exit Delay

You now have xx seconds to leave the

premises before the exit delay expires. When

the exit delay is completed, the alarm system

is armed.

“Please disarm”

Countdown Bar

Entry Delay

You must disarm the system before the entry

delay expires, or an alarm will occur.

“Synchronizing”

Countdown Bar

Sniffer Mode

You must active the wireless transmitter before the

sniffer delay expires.

Alarming “Alarm” is displayed upper the red bar, and the Zone

“Alarm” is displayed in a red status bar along the red bar.

An alarm (bell) icon along with “Alarm” is displayed alternately with the

Zone that has caused the alarm.

2.6 Quick View of Menu Functions

Icon and Caption Description Factory

Defaults

Main

Menu Settings

Delay

Exit Delay

0~65535

Used to set Exit Delay

0~65535, unit: second

seconds

Entry Delay

0~65535

Used to set Entry Delay

0~65535, unit: second

seconds

Siren

Duration

0~65535

Used to set Siren Duration

0~65535, unit: minute 3 minutes

Switch

Arm Beep

Enable/Disable Arm and

Disarm Beep (1)

Enable

Siren

Enable/Disable Alarm

Continuous Siren when an

alarm occurs

Enable

Arm SMS

Enable/Disable SMS

notication when arm or

disarm

Disable

Keypad Lock

Enable/Disable Keypad Lock (2)

Disable

Backlight

Enable/Disable Keypad

Backlight(3)

Enable

Main

Settings

Switch

Keypad Tone

Enable/Disable operation

chime Enable

Delay Tick

Enable/Disable entry and

exit chime Enable

Door/Window

Open Warning

Enable/Disable Exit Alarm

Warning (4) Enable

Password

System

Change System Code

4 digits (5) 6666

User

Change User Code(6)

4 digits 1234

Language

English

Language Selection (7) English

Deutsch

РУССКИЙ

Español

Polski

Italiano

Francais

Português

Romana

Initialization

Loading Factory Defaults

Reset Reset

1st

Phone Used to set the rst Phone Number, Enable/

Disable Dialling and Enable/Disable SMS Null

Phone

2nd Phone

Used to set the second Phone Number,

Enable/Disable Dialling and Enable/

Disable SMS

Null

3rd Phone

Used to set the third Phone Number,

Enable/Disable Dialling and Enable/

Disable SMS

Null

4th Phone

Used to set the fouth Phone Number,

Enable/Disable Dialling and Enable/

Disable SMS

Null

5th Phone

Used to set the fouth Phone Number,

Enable/Disable Dialling and Enable/

Disable SMS

Null

Log

Alarm Log Used to view system alarm events.

Arm Log Used to view system arm/disarm events.

Parts

Remote Pairing, Delete or Delete All the wireless

keys

Detector Pairing, Edit, Delete, Delete All the

wireless sensors

RFID Pairing, Delete or Delete All the RFID tags

Add Pairing a new Wireless Key, Sensor or

RFID tag

Delete/Edit

Delete a Wireless Key or RFID tag from

the list

Edit/Delete a wireless sensor from the list

Delete All Delete all the Wireless Key, Sensors or

RFID tags

Siren Learn Used to sends a transmission signal to

the wireless siren be paired.

Eol Zone Used to set the Zone(EOLR) Name, Type

EOL

Alarm Socket Pairing with the alarm syncing wireless

switch

Socket Pairing with the wireless switch

Wi-Fi

Airlink WiFi conguration (Requires the mobile

APP).

Unbind Unbind the Panel link from the server

MAC/IP Used to display the MAC and IP

addresses of the WiFi module

Record

Record Message Recording and Playback

Play Used to listen to the recorded message

Delete Used to delete the recorded message

Duration

Used to set Record Duration

( unit: second, 1-20 is available ) 20 seconds

Timer

Arm Timer

Used to set a daily time to arm

automatically,

and Enable/Disable automation

Disarm Timer

Used to set a daily time to disarm

automatically,

and Enable/Disable automation

Zone&Sync reserved + 08:00

Date&Time Set the time and date

Wi-Fi Sync Enable/Disable using the WiFi network-

provided time Enable

2G/3G Sync Enable/Disable using the cellular

network-provided time Enable

Inhaltsverzeichnis

Andere PNI Sicherheitssystem Handbücher

PNI

PNI PG600LR Bedienungsanleitung

PNI

PNI PG2710 Bedienungsanleitung

PNI

PNI House WiFi550 Bedienungsanleitung

PNI

PNI SafeHouse HS008 Bedienungsanleitung

PNI

PNI House PTZ1350 Bedienungsanleitung

PNI

PNI SafeHouse HS650 Bedienungsanleitung

PNI

PNI HOUSE AHD808 Bedienungsanleitung

PNI

PNI SafeHouse HS007 Bedienungsanleitung

PNI

PNI SafeHome PT700 Bedienungsanleitung

PNI

PNI SafeHouse HS007LR Bedienungsanleitung

PNI

PNI HOUSE PTZ1300 Bedienungsanleitung

PNI

PNI IPMAX POE FIVE Bedienungsanleitung

PNI

PNI House WiFi 400 Bedienungsanleitung

PNI

PNI PG100 Bedienungsanleitung

PNI

PNI House AHD1250 Bedienungsanleitung

PNI

PNI House WiFi550 Bedienungsanleitung

PNI

PNI SafeHouse HS007LR Bedienungsanleitung

PNI

PNI SafeHouse HS600 Bedienungsanleitung

PNI

PNI S004 Bedienungsanleitung

PNI

PNI House PTZ1500 Bedienungsanleitung

PNI

PNI PNI S004 Bedienungsanleitung

PNI

PNI HOUSE IP516 Bedienungsanleitung

PNI

PNI HOUSE WiFi650 Bedienungsanleitung

PNI

PNI SmartHome SM400 Bedienungsanleitung

Beliebte Sicherheitssystem Handbücher anderer Marken

Inner Range

Inner Range Concept 2000 Bedienungsanleitung

Climax

Climax Mobile Lite R32 Montageanleitung

FBII

FBII XL-31 Series Bedienungsanleitung

Johnson Controls

Johnson Controls PENN Connected PC10 Bedienungsanleitung

Aeotec

Aeotec Siren Gen5 Bedienungsanleitung

IDEAL

IDEAL Accenta Betriebsanleitung

Swann

Swann SW-P-MC2 Bedienungsanleitung

Ecolink

Ecolink Siren+Chime Bedienungsanleitung

Digital Monitoring Products

Digital Monitoring Products XR150 Bedienungsanleitung

EDM

EDM Solution 6+6 Wireless-AE Bedienungsanleitung

Siren

Siren LED GSM Bedienungsanleitung

Detection Systems

Detection Systems 7090i Montageanleitung

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Bedienungsanleitung

Siemens

Siemens FDM273 Bedienungsanleitung

DSC

DSC PC 4010 Betriebsanleitung

UniPOS

UniPOS 6202L Bedienungsanleitung

AJAX

AJAX DoubleButton Bedienungsanleitung

Rondish

Rondish Nexus Bedienungsanleitung