Polaris 2830426 Gebrauchsanweisung

Printed in China

2830426-M0_082015

SFA Companies

10939 N. Pomona Avenue

Kansas City, MO 64153

Phone: 888-332-6419

Snowmobile Attachment

Model

2830426

Capacity

1250 lbs

Operating Instructions & Parts Manual

This is the safety alert symbol. It is used to alert you to potential personal injury hazards.

Obey all safety messages that follow this symbol to avoid possible injury or death.

U.S. Patent Pending

SAFETY AND GENERAL INFORMATION

Save these instructions. For your safety, read, under-

stand, and follow the information provided with and on

this attachment. The owner and operator of this equip-

ment shall have an understanding of this product and it’s

safe operating procedures before attempting to use. The

owner and operator shall be aware that use and repair

of this product may require special skills and knowledge.

Instructions and safety information shall be conveyed in

the operator’s native language before use of this lift is

authorized. If any doubt exists as to the safe and proper

use of this lift, remove from service immediately. Inspect

before each use. Do not use if broken, bent, cracked or

damaged parts are noted. Any lift that appears damaged

in any way, or operates abnormally shall be removed

from service immediately. If the product has been or is

suspected to have been subjected to a shock load (a

load dropped suddenly, unexpectedly upon it), imme-

diately discontinue use until it has been examined by

a Polaris authorized service center. It is recommended

that an annual inspection be done by qualied personnel.

Labels and Operator’s Manuals are available from the

manufacturer (see Replacement Parts, pg. 6).

Figure 1 - Model 2830426 Nomenclature

PRODUCT DESCRIPTION

The Polaris Snowmobile Attachment is specically de-

signed to lift, and support, up to rated capacity loads

consisting of a single snowmobile whose frame is com-

patible with the lifting platform. Incompatibility is evident

when the loaded vehicle wobbles, feels unstable, and/

or does not sit securely on the lift platform. This product

is NOT suitable for lifting, leveling and/or positioning

automobiles, trucks, SUV’s or conveyances other than

those specically listed and approved above. This prod-

uct is NOT suitable for lifting, leveling and/or positioning

houses, construction trailers and dwellings in general.

This product does not contain independent lifting de-

vices, but is designed to be permanently assembled. The

Hydraulic Unit is not to be used independently of the lift.

Lift Platform

Threaded

Rod/Hook

Assemby

Adjustment Knob

Hook Height

Adjustment

Saddle Stop Plate

PREPARATION (ref. Fig. 1)

1. Before using this product, read the operator’s manual

completely and familiarize yourself thoroughly with the

product, its components and recognize the hazards

associated with its use.

Verify that the product and application are compatible,

if in doubt call Customer Service (888) 332-6419.

• Study, understand and follow all instructions before

operating this device.

• Use of this product is limited to lifting, lowering and

holding loads consisting of a single vehicle whose

lifting points are compatible with the lifting platform.

Incompatibility is evident when the loaded vehicle

wobbles, appears unstable, and/or does not secure-

ly engage the lift platform.

• Do not exceed rated capacity.

• Use only on hard, level surfaces.

• Center load on lift platform.

• Immediately after lifting load, ensure Height Locking

Lever is engaged.

• Engage locking caster mechanism before working

on or around loaded lift. Do not move or dolly load

supported by this device.

• Restraining an incompatible load will not make the

load secure and may cause unexpected loss of

load.

• Never work on, around or under a load that is not

secured and stable.

• Keep operator’s and bystander’s head, hands and

feet away from lift arms when raising and lowering.

• No alterations shall be made to this product.

• Failure to heed this warning may result in personal

injury and/or property damage.

WARNING

Figure 2 - Snowmobile Adapter Assembly

MAINTENANCE

Keep lift clean and well lubricated. Apply a couple of

drops of light machine oil to all pivoting joints as needed.

Thoroughly wipe up excess oil.

Lubrication

A periodic coating of light lubricating oil to pivot points,

axles and hinges will help to prevent rust and assure

that wheels, casters and pump assemblies move freely.

Cleaning

Check the pump piston and Ram occasionally for signs

of rust or corrosion. Clean as needed and wipe with an

oily cloth.

Storage

When lift is not in use, Lift Platform should be stored in

the fully retracted position.

ASSEMBLY

1. Fasten the Snowmobile attachment to the T-1250 lift

saddle with the provided bolts.

2. Once secure install angle bracket and threaded rod/

hook assembly.

3. Review adapter and lift assembly to conrm proper

tment.

OPERATION

1. Line up vehicle undercarriage with saddle.

2. Lift saddle to just before contact to ensure the contact

area will be in a proper location.

WARNING: Use only on hard, level surfaces ca-

pable of sustaining rated capacity loads.

3. Pull lift back until saddle stop plate makes contact with

snowmobile tunnel.

4. Close Hydraulic Release Valve and carefully pump

jack until vehicle reaches desired height. Final height

must correspond with the locking teeth on the Height

Locking Lever.

5. Carefully turn the Release Knob counterclockwise

until the Lift Platform engages the Height Locking

Lever, then close the Release Knob by turning it fully

clockwise. Do not work around or under load un-

less Height Locking Lever is properly engaged.

CAUTION: Clear all tools and personnel before

lowering load. Only attachments and/or adapters

supplied by the manufacturer shall be used with

this device.

6. To lower the Lift Platform pump the Lift Pedal several

times to disengage the Height Locking Lever, then

depress the Height Unlocking Lever pedal. Carefully

turn the Release Knob counterclockwise to lower the

load slowly.

Figure 3 - Snowmobile Attachment Assembly

TROUBLESHOOTING

Symptom Possible Causes Corrective Action

Hydraulic Unit will not lift • Release Valve not tightly closed

• Overload condition

• Ensure Release Valve tightly closed

• Reduce overload condition

Hydraulic Unit bleeds off after

lift

• Release Valve not tightly closed

• Overload condition

• Ensure Release Valve tightly closed

• Reduce overload condition

• Contact Customer Service

Lifting Platform will not lower

after unloading

• Reservoir overlled

• Linkages binding

• Drain uid to proper level

• Clean and lubricate moving parts

Poor lift performance

• Fluid level low

• Air trapped in system

• Ensure proper uid level

• Follow Bleeding/Venting Trapped Air

procedure, pg. 4

Will not lift to full extension • Fluid level low • Ensure proper uid level

REPLACEMENT PARTS

Available Parts: Please refer to the parts drawing when ordering parts. Not all components of the Lift are

replacement items, but are illustrated as a convenient reference of location and position in the assembly sequence.

When ordering parts, give Model number, serial number and description. Call or write for current pricing:

SFA Companies, 10939 N. Pomona Ave. Kansas City, MO 64153, U.S.A. Telephone: 1-888-332-6419

Fax: 1-816-891-6599

Figure 5 - Replacement Parts Illustration for Model 2830424

Item Part No. Description Qty

1 2830426-1 Threaded Rod / Hook Assembly 1

2 2830426-2 Locking Swivel Caster Assembly 1

3 2830426-3 Hydraulic Unit Assembly (items 4, 11 and 12 not included) 1

4 2830426-4 Hardware Kit (not shown) -

- 2830426-L0 Labels (not shown) -

- 2830426-M0 Owner’s Manual -

NOTES:

ONE YEAR LIMITED WARRANTY

For a period of one (1) year from date of purchase, SFA Companies will repair or replace, at its option,

without charge, any of its products which fails due to a defect in material or workmanship, or which fails to conform

to any implied warranty not excluded hereby.

Performance of any obligation under this warranty may be obtained by returning the warranted product,

freight prepaid, to SFA Companies Warranty Service Department, 10939 N. Pomona Ave., Kansas City, MO 64153.

Except where such limitations and exclusions are specically prohibited by applicable law, (1) the

CONSUMER’S SOLE AND EXCLUSIVE REMEDY SHALL BE THE REPAIR OR REPLACEMENT OF DEFECTIVE

PRODUCTS AS DESCRIBED ABOVE, and (2) SFA Companies SHALL NOT BE LIABLE FOR ANY

CONSEQUENTIAL OR INCIDENTAL DAMAGE OR LOSS WHATSOEVER, and (3) THE DURATION OF ANY AND

ALL EXPRESSED AND IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION, ANY WARRANTIES OF

MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, IS LIMITED TO A PERIOD OF ONE (1)

YEAR FROM DATE OF PURCHASE.

Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not

apply to you. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the

above limitation or exclusion may not apply to you. This warranty gives you specic legal rights, and you may also

have other rights which vary from state to state.

Inhaltsverzeichnis

Andere Polaris Geländefahrzeug Handbücher

Polaris

Polaris PREDATOR 2003 Bedienungsanleitung

Polaris

Polaris Sportsman 500 Touring Quadricycle Bedienungsanleitung

Polaris

Polaris 325 MAGNUM 4X4 HDS A00CD32FA Bedienungsanleitung

Polaris

Polaris 550 Indy 2022 Bedienungsanleitung

Polaris

Polaris Predator 50 Bedienungsanleitung

Polaris

Polaris RANGER XP 900 Bedienungsanleitung

Polaris

Polaris IQ Turbo LX Bedienungsanleitung

Polaris

Polaris 340 Edge Bedienungsanleitung

Polaris

Polaris 9920183 Leitfaden

Polaris

Polaris 2014 Sportsman 550 EPS Bedienungsanleitung

Polaris

Polaris SPORTSMAN ACE 2014 Bedienungsanleitung

Polaris

Polaris 2009 Sportsman X2 500 EFI Bedienungsanleitung

Polaris

Polaris 600 IQ Widetrak Bedienungsanleitung

Polaris

Polaris Ranger 900 XP Bedienungsanleitung

Polaris

Polaris 2005 RMK 900 Bedienungsanleitung

Polaris

Polaris Outlaw 9920783 Bedienungsanleitung

Polaris

Polaris Sportsman 550 XP EPS Bedienungsanleitung

Polaris

Polaris Ream Tips 9925712 Bedienungsanleitung

Polaris

Polaris 6X6 Leitfaden

Polaris

Polaris 550 INDY 144 Bedienungsanleitung

Polaris

Polaris 2000 INDY 500 XC SP Bedienungsanleitung

Polaris

Polaris RANGER 1000 2023 Bedienungsanleitung

Polaris

Polaris Sportsman 800 EFI Bedienungsanleitung

Polaris

Polaris Sportsman 9922233 Bedienungsanleitung

Beliebte Geländefahrzeug Handbücher anderer Marken

Yamaha

Yamaha Tri Moto 125 Bedienungsanleitung

Yamaha

Yamaha YFM350X Warrior Bedienungsanleitung

APRILIA

APRILIA QUASAR 100 Bedienungsanleitung

Suzuki

Suzuki LT-A700X Bedienungsanleitung

Ski-Doo

Ski-Doo SCANDIC WT Handbuch

Suzuki

Suzuki LT-Z400 Bedienungsanleitung

Arctic Cat

Arctic Cat 120 sno pro Bedienungsanleitung

Yamaha

Yamaha RS90PB Bedienungsanleitung

Yamaha

Yamaha FX Nytro FX10X Bedienungsanleitung

Dinli

Dinli DL702 Bedienungsanleitung

Yamaha

Yamaha SXV70ML Bedienungsanleitung

Baja motorsports

Baja motorsports ATV 90 Handbuch

Arctic Cat

Arctic Cat ALTERRA 450 Bedienungsanleitung

Yamaha

Yamaha YFM45FAT Handbuch

Can-Am

Can-Am DS 70 Handbuch

Ski-Doo

Ski-Doo SKANDIC Handbuch

Yamaha

Yamaha VT500B Bedienungsanleitung

GAS GAS

GAS GAS K2 QUAD 250 - SERVICE Bedienungsanleitung