Polycom RMX 2000 Datenblatt

Installation Quick Start Guide for

RMX 2000

Basic Setup

Modifying the USB Key Settings

1Insert the USB Key provided with your system into the PC workstation and double-

click LanConfigUtility.exe to start the utility.

2Modify the parameters in the utility’s dialog box using the information supplied by

your network administrator.

3Click OK.

4Remove the USB Key from the PC.

First-time Power-up and Connection to MCU

1Insert the USB Key containing the modified IP addresses in the USB port on the

RMX’s back panel.

2Power the RMX ON.

The parameters in the lan.cfg file are uploaded from the USB key to the RMX’s

memory and applied during the power-up sequence.

System power-up sequence may take up to five minutes.

During the first-time power-up the red ERR LED on the RMX’s front panel remains

ON until both the Management and IP Network Services have been defined.

3Remove the USB key.

Before installing the RMX 2000 and performing the Basic Setup, please read the

General Safety Precautions described in the Polycom RMX 2000 Hardware Guide.

Do not remove the protective plastic caps from LAN1, LAN3 and ShMG ports.

RMX 2000

FAN

STATUS

CNTL

MPM+80

PWR

STATUS

PWR FANS

ERR RDYACT HD HS

ERR RDY ACT HS

HSERR RDY ACT

MPM/MPM+ Cards & LEDs Fan Drawer

Power Supply Drawer Control Unit

& LEDs

USB Ports - not for

customer use Optional CPU &

LEDs

Fan &

Power

Status

LEDs

Front

Panel

LAN 2 Connection Power

Cable

Off/On

Switch

E1/T1 Connections

(Optional)

Rear

Panel

Enter the IP address of the RMX Control Unit and press Enter.

Enter POLYCOM.

Click Login.

Click to connect to Polycom

web site and register the

RMX.

ClickProductRegistration

and follow the on screen

instructions to obtain the

Product Activation Key.

Enter or paste the Product

Activation Key obtained.

Click OK.

RMX™ 2000

1DOC2553A

Modifying the Default IP Service

This section describes the definition of H.323 Network Service. For detailed description

of H.323, SIP and ISDN Network Service definitions, see the RMX Getting Started Guide,

“First Time Installation and Configuration”.

In the Fast Configuration Wizard, select Next to move from one window to another.

6In the IP Network Service creation confirmation, click OK.

8Click Save & Close.

9In the Success Message box confirming successful configuration, click OK.

10 In the Reset Confirmation dialog box, click Yes.

11 In the Please wait for system reset message box, click OK.

System restart may take up to five minutes.

12 Refresh the browser periodically until the Login screen is displayed and Login.

In the Main Screen an MCU State indicator displays the time remaining until the

system start-up is complete.

13 Create a new User with Administrator permissions and delete the default User

(POLYCOM). For system security reasons, only when this step is completed and if

there are no System Errors, the system is fully configured and the green RDY LED

on the CNTL module (on the RMX’s front panel) turns ON.

Connecting to a Conference Directly or via Entry

Queue (EQ)

The RMX is shipped with pre-configured default conferencing entities that can be used

to dial in and start conferences. Default (Transit) Entry Queue ID: 1000, default Meeting

Room IDs: 1001, 1002, 1003, and 1004.

H.323 Participants

H.323 participants dial:

[MCU Prefix in Gatekeeper][Conference or Entry Queue ID/Name]

For example, if the MCU prefix in gatekeeper is 925, you can dial to the default (Transit)

Entry Queue by entering 925 or 9251000 and be routed to Meeting Rooms by entering its

ID (i.e. 1001, 1002, 1003 or 1004). You can connect directly to one of the default Meeting

Rooms, by dialing its number, for example, 9251001.

Alternatively, you can use the Entry Queue or conference name to connect directly to

the conference. For example, if the conference name is Maple_Room, the participant can

dial 925Maple_Room.

SIP Participants

The dialing string is composed of the conference routing name as registered with the

SIP server and domain name in the format: conference_name@domain_name

For example, if conference routing name is 1001, the string is [email protected].

ISDN and PSTN Participants

ISDN and PSTN participants can connect to conferences and Meeting Rooms directly or

via an Entry Queue by dialing one of the numbers (including the country and area code

if needed) assigned to the conference, Meeting Room or Entry Queue. When connecting

to an EQ they are routed to their conference according to the conference ID. For

example, if the assigned dial in number is 4045555, the ISDN/PSTN endpoint dials this

number with the appropriate area code (for example, 678) and country code (001).

Conference Control Using DTMF Codes

On the RMX 2000, IPv4 is the default protocol for setting the Network Service in the

Fast Configuration Wizard.

Change the default service

name if required.

Enter the address to be

used by IP endpoints when

dialing in to the MCU.

Enter the IP address(es) of

the media card(s).

Enter the subnet mask of

the MCU.

Enter the IP address of the

default router.

Enter the name of the MCU

on the network.

Optional. Select Specify to

define a DNS server.

Optional. Define the DNS

server properties:

•Registration mode

•The name of the MCU

domain

•The static IP address of

the primary DNS server

Select H.323 as the IP

Network Type.

Select Specify to configure

the gatekeeper parameters.

Enter gatekeeper’s host

name or IP address.

Enter the string with which the

MCU registers itself with the

gatekeeper.

Enter the alias that identifies

the RMX’s Signaling Host

within the network. Up to five

aliases can be defined for

each RMX.

Optional. Modify the default

settings of the system flags

that define the general

system behavior such as the

number of digits in the

conference ID assigned by

the MCU.

These flags can be modified

later, if required, by selecting

the System Configuration

option from the Setup menu.

Operation DTMF String Operation DTMF String

Mute My Line *6 Request individual

assistance *0

Unmute My Line #6 Request assistance for

conference 00

Increase Broadcast Volume *9 Increase Listening Volume *76

Decrease Broadcast Volume #9 Decrease Listening Volume #76

Play Help Menu *83 Change To Chairperson *78

Start Click&View to modify

personal layout ** Show Number of

Participants *88

RMX™ 2000

2DOC2553A

Andere Handbücher für RMX 2000

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Polycom Server Handbücher

Polycom

Polycom DOC2547A Montageanleitung

Polycom

Polycom DOC2563A Bedienungsanleitung

Polycom

Polycom RSS 2000 V1.0 Bedienungsanleitung

Polycom

Polycom SpectraLink 1725-36032-001 Bedienungsanleitung

Polycom

Polycom RSS 2000 Bedienungsanleitung

Polycom

Polycom KIRK Wireless Server 6000 Bedienungsanleitung

Polycom

Polycom KIRK 500 Bedienungsanleitung

Polycom

Polycom Real-Time Media Conferencing Platform RMX... Bedienungsanleitung

Polycom

Polycom RealPresence 4000 Bedienungs- und Wartungsanleitung

Polycom

Polycom KIRK 600v3 Bedienungsanleitung

Polycom

Polycom Realpresence collaboration server 1500 Kurzanleitung

Polycom

Polycom Real-Time Media Conferencing Platform RMX... Datenblatt

Polycom

Polycom DMA 7000 Bedienungsanleitung

Polycom

Polycom RMX 2000 Datenblatt

Polycom

Polycom RMX 1500 Montageanleitung

Polycom

Polycom Spectralink 8000 SVP100 Bedienungsanleitung

Polycom

Polycom DOC2558B Montageanleitung

Polycom

Polycom KIRK Wireless Server 6000 Bedienerhandbuch

Polycom

Polycom realpresence 1800 Montageanleitung

Polycom

Polycom Realpresence collaboration server 1500 Service-Handbuch

Polycom

Polycom RSS 2000 Bedienungsanleitung

Polycom

Polycom 3725-18101-001B Service-Handbuch

Polycom

Polycom V2IU6400-S Bedienungsanleitung

Polycom

Polycom Realpresence collaboration server 1500 Montageanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung

Planet

Planet NAS-7410 Bedienungsanleitung

Lenovo

Lenovo ThinkSystem SR635 V3 Bedienungsanleitung