Polycom RSS 2000 Bedienungsanleitung

DOC2153A RSS 2000 Getting Started guide - V1 0.doc Page 1

Polycom ™ RSS 2000 V1.0

Getting Started Guide

General Safety Precautions

Follow these rules to ensure general safety:

•Keep the area around the Polycom RSS 2000 unit clean, free of

clutter and well ventilated.

•Decide on a suitable location for the equipment rack that will hold

the RSS 2000 unit and is near a grounded power outlet.

•Use a regulating uninterruptible power supply (UPS) to protect

the RSS 2000 unit from power surges and voltage spikes, and to

keep it operating in case of a power failure.

Hardware Specifications

•Hardware: Pentium 4, 2.8Mhz,1.5G RAM,250G Hardisk.

•Form Factor: 1U 19” rack mount

•Height: 1.73” (44 mm)

•Width: 16.83” (430 mm)

•Depth: 15.35” (390 mm)

•Gross Weight: 22.4 lbs (10.2 kg)

•Power Supply: Thermal controlled 220W ATX AC power

supply w/PFC

•AC Voltage: 100 - 240 VAC, 60-50 Hz, 5-3 Amps

•Operating System: XP OS

Preparations

Obtain the following information from your network administrator:

•RSS 2000 unit, Subnet Mask and Default Gateway IP addresses

•Gatekeeper IP address, Prefix, and E.164 of the RSS 2000

Unpacking and Installing the RSS 2000

1. Place the RSS 2000 unit on a stable flat surface in the selected

location.

2. To connect to the power source, insert the power cable into the

Power connector on the rear panel of the MGC+ unit and insert

the Power cable into the power source socket.

3. Connect the LAN cable to LAN1 in the back of the system.

4. Turn on the power switch.

DOC2153A RSS 2000 Getting Started guide - V1 0.doc Page 2

Initial RSS 2000 IP Configuration

The system is shipped with the following default IP addresses:

•IP Address:192.168.1.254

•Subnet Mask: 255.255.255.0

•Gateway: 192.168.1.1

There are two ways to change the initial IP address of the system:

•Via a cross over LAN cable

•Via a RS232 or Telnet Console.

Changing the Initial IP Address via a Cross-over LAN

Cable

1. Connect a cross over LAN cable to LAN1 in the RSS 2000 rear

panel.

2. Set your laptop to the same segment of the RSS, for example (in

your laptop IP config setting):

3. Open Internet Explorer and browse to:

http://192.168.1.254

4. Login to the system.

User name: Administrator

Password: polycom

5. Go to System Configuration->IP Setting and modify the IP

address.

6. Click the Save button.

7. Reset the system.

DOC2153A RSS 2000 Getting Started guide - V1 0.doc Page 3

Changing the Initial IP Address via an RS-232 Console or

Telnet

Another option to modify the IP address of the RSS 2000 is using the

RS232 console.

1. Connect to the RS232 port – and activate the console (9600,

8bits).

2. Login, using the default Login name: polycom (or any

administrator password).

When you are logged in to the console, you will see the system’s

current IP address.

3. Change the default IP address to the site’s IP address.

In the command line (#), enter:

set lan1 static <IP address> mask < IP address> [gw < IP

address>]

Note

•These steps are also applicable to Telnet connection.

•You can use either Telnet or RS232, not both to configure

the initial system IP addresses.

The system is now ready for use. For additional configuration

information, refer to the RSS200 User’s Guide.

RSS 2000 Maximum Capacity

Scenario Description Maximum Capacity

Conference

Recording

How many conferences

can be recorded

simultaneously

2 conference or 2 EPs

dialing in the same time1

H239 recorded link at a

time

Point to

Point

recording

How many point to point

calls can be record (if

both are dialing into the

POLYCOM ™ RSS

2000)

H323

Playback

How many conferences

can be playback in H323

Archive view How many streaming

can be reviewed

(unicast) – based on the

Web Server capacity

Network TCP/UDP Ports used by RSS 2000

Usage Type Port Range

Manager TCP 81

Web TCP 80

Trace UDP 30011

Gatekeeper UDP 1719

RAS UDP 1720

Q.931 Socket TCP 1720

H.245 Socket TCP 1730-1739

Endpoint/

H.323

Audio / Video / Data UDP 2000-2099

Live Broadcast TCP 1800-1801

Media On Demand Archive TCP 2800-2859

DOC2153A RSS 2000 Getting Started guide - V1 0.doc Page 4

RSS2000 Policies and Limitations

Subject Description

H.323 Alias

length

The maximum length of the system H.323 alias name

is 16 characters

IVR

message

The format for IVR message files is: WAV files, PCM

16bits

Console

Service

RS232 configuration: Baud rate 9600, Data bits 8,

Parity None, Stop bits 1, Flow control OFF.

ONLY ONE connection to the Console service is

allowed, either by RS232 or by Telnet, but not both.

Endpoint

1. When schedule a dial out & record from the Web

UI, RSS will loopback the video and NEVER

show the menu unless a menu operation (FECC

arrow keys or DTMF 2/4/6/8) is given from the

endpoint.

2. When a pre-defined endpoint dials into the RSS

and the endpoint has the "immediate recording"

option, RSS will do the same as above.

3. When inviting an endpoint to a P2P recording

room (using E.164 number of the P2P room

followed by #/* and E.164 number of the invited

endpoint ), the inviting endpoint will have the

menu and the invited endpoint won’t have the

4. When two endpoints meet at a P2P recording

room, only one of them can have the menu at a

time.

H.264

bandwidth

The maximum bandwidth for H.264 is limited to 768K

P2P

recording

maximum

bandwidth

Maximum bandwidth for a P2P recording room is

1024K. If video protocol for P2P recording room is

H.264, then the maximum bandwidth is 768K

Archive file

size

If the media file size exceeds 4GB, downloading it

from Web UI may be incomplete.

Subject Description

Media

Player

Support

Windows Media Player 9/10 is required. WMP 10 is

recommended.

RealPlayer can also be used if WMP is properly

installed.

QuickTime player is not supported.

Some third party media player such as Media Player

Classic (MPC) and VLC can also be used, but they

were not certify

Archive

playback

Archive playback with WMP does not support

playback controls: Pause/Resume/FF/Backward, etc

H.323

playback

During H.323 playback, if there is packet loss and

endpoint requests I-Frame, RSS cannot apply the

request. Since all audio/video data are from the

media file.

System

Reset

Hard reset (power off and on) is not

recommended.

Reset should be done via the Web UI or Console

service whenever possible.

Andere Handbücher für RSS 2000

Andere Polycom Server Handbücher

Polycom

Polycom DOC2559B Montageanleitung

Polycom

Polycom V2IU6400-S Bedienungsanleitung

Polycom

Polycom RealPresence 800s Bedienungsanleitung

Polycom

Polycom DOC2558C Montageanleitung

Polycom

Polycom Real-Time Media Conferencing Platform RMX... Bedienungsanleitung

Polycom

Polycom DOC2558B Montageanleitung

Polycom

Polycom RMX 1500 Bedienungsanleitung

Polycom

Polycom RealPresence 800s Service-Handbuch

Polycom

Polycom RSS 2000 Bedienungsanleitung

Polycom

Polycom RSS 2000 Bedienungsanleitung

Polycom

Polycom 3150-30828-001 Bedienungsanleitung

Polycom

Polycom DOC2232A Bedienungsanleitung

Polycom

Polycom 3725-18101-001B Service-Handbuch

Polycom

Polycom KIRK KWS1500 Produkthandbuch

Polycom

Polycom Realpresence collaboration server 1500 Service-Handbuch

Polycom

Polycom DMA 7000 Bedienungsanleitung

Polycom

Polycom DOC2562A Bedienungsanleitung

Polycom

Polycom Collaboration Server (RMX) 2000 Montageanleitung

Polycom

Polycom V2IU4300T Bedienungsanleitung

Polycom

Polycom Realpresence collaboration server 1500 Service-Handbuch

Polycom

Polycom RealPresence RMX 1800 Datenblatt

Polycom

Polycom DOC2560A Bedienungsanleitung

Polycom

Polycom RealPresence Collaboration Server Virtual Edition... Bedienungsanleitung

Polycom

Polycom VVX 1500 Series Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung