Porsche Home Energy Manager Bedienungsanleitung

OPERATING INSTRUCTIONS HEM V.1.1 DE Page 1of 18

Home Energy

Manager

Operating instructions

Part number 9Y0.915.686.x

Page 2of 18 OPERATING INSTRUCTIONS HEM

V.1.1 DE

Legal Notice

Dr. Ing. h.c. F. Porsche AG

Porscheplatz 1

D-70435 Stuttgart

Germany

Reprinting, even of excerpts, or duplication of any type are

only permissible with the written authorisation of Dr. Ing. h. c.

F. Porsche AG.

Notes on these instructions

Always pay attention to the warning and safety

instructions in this booklet. The manufacturer cannot

be held liable in the event of improper handling

contrary to these instructions.

The "Conditions of Acceptability" of supplied

accessories must also be noted and adhered to.

Target group for these instructions

These instructions are aimed at persons who are

entrusted with or responsible for operating the Porsche

Home Energy Manager.

 
 OPERATING INSTRUCTIONS HEM V.1.1 DE Page 3of 18 
 
Contents 
Legal Notice....................................................................2 
Notes on these instructions.......................................2 
Target group for these instructions............................2 
Basic safety principles ....................................................4 
Qualification of personnel..........................................4 
Notes on installation..................................................5 
Installation at high altitude ........................................5 
Product information.........................................................6 
Proper use ................................................................6 
Overview and specification.............................................7 
Displays and controls................................................8 
Connections on top of device..................................10 
Overview of device connections..............................10 
Connections on underside of device.......................11 
Technical specifications..........................................12 
Energy Manager identification plate........................13 
Product scope of supply..........................................13 
Disposing of the packaging.....................................14 
Starting up ....................................................................14 
Settings and operation .................................................14 
Starting the web application....................................15 
Product maintenance ...................................................16 
Disposing of the product...............................................16 
Applicable standards/directives....................................17 
 
 
 

Page 4of 18 OPERATING INSTRUCTIONS HEM

V.1.1 DE

Basic safety principles

DANGER!

Danger to life due to electrical

voltage!

Injuries due to electric shock and/or

burns, possibly resulting in death, are

possible.

During all work, make sure at all times

that power to the system is switched off

and secured so it cannot inadvertently be

switched on. Do not open the housing of

the Home Energy Manager under any

circumstances

Qualification of personnel

The electrical installation may only be performed by

persons with the relevant knowledge of

electrical/electronic equipment (electrician). These

persons must provide proof that they have the

specialist knowledge required to install electrical

systems in the form of an examination certificate.

Improper installation can endanger your own life and

that of others.

Requirements for the electrician performing the

installation:

Ability to evaluate test results

Knowledge of IP ratings and their use

Familiarity with fitting the electrical installation

materials

Knowledge of the applicable electrical/electronic

and national regulations

Knowledge of fire safety measures and general

and specific safety and accident prevention

regulations

Ability to select suitable tools, testers and, if

necessary, personal protective equipment, as

well as the electrical installation materials for

ensuring tripping conditions

Knowledge of the type of power supply network

(TN, IT and TT system) and the resulting

connection conditions (neutral connected to earth

in socket, protective earthing, required additional

measures)

OPERATING INSTRUCTIONS HEM V.1.1 DE Page 5of 18

Notes on installation

Electrical installation must be performed in such a way

that:

Shock protection of the entire electrical installation

is in place at all times, in accordance with locally

applicable regulations.

The fire safety regulations in force at the site are

complied with at all times.

The user interface and USB ports of the Home

Energy Manager are accessible to the customer

without restriction and without risk of electric

shock.

If the optional wall-mounted distribution box is

used, the cables of the current sensors must not

exceed the permitted total line length of 3.0 m.

The inputs for voltage measurement and the relay

on the Home Energy Manager must be equipped

with suitable backup fuses.

The correct length and product-specific bending

radii must be complied with when laying installation

cables.

If the installation environment requires Overvoltage

Category III (OVCIII), the input side of the external

power supply must be equipped with protective circuity

(e.g. a varistor) that conforms to local regulations.

Installation at high altitude

The supply leads of sensors that are installed in

electrical facilities at an altitude of over 2,000 m or that

must conform to Overvoltage Category III (OVCIII) due

to their installation location require additional insulation

in the form of a shrink-fit hose or suitable insulating

hose with a breakdown strength of 20 kV/mm and

minimum wall thickness of 0.4 mm along the entire

length of the cable between the sensor output

(housing) and the input terminal on the Home Energy

Manager.

Page 6of 18 OPERATING INSTRUCTIONS HEM

V.1.1 DE

Product information

The Porsche Home Energy Manager works in

combination with the Porsche charger as an energy

management system.

The Porsche Home Energy Manager measures and

individually assesses the available amount of energy

and the electricity consumption. The Energy Manager

communicates with the Porsche charger via an

interface, and lets it know how much energy can be

made available to the hybrid or electric vehicle for

charging the vehicle battery.

The electrician configures the Energy Manager for you

via a web application, and sets all the necessary

values there. This way, your existing electrical

installation is protected against "blackout" and your

vehicle can be charged at low cost. However, this

feature is only available if different electricity

rates/prices and/or an existing photovoltaic system are

used.

When vehicle charging begins, the so-called

negotiation phase starts and the Energy Manager

generates price and output tables in accordance with

the current ISO/IEC 15118 standard.

Transmission between the Energy Manager and the

Porsche Mobile Charger Connect takes place via

Ethernet, PLC network or WiFi using the EEBus

protocol.

During charging, the Energy Manager updates the

maximum available charging current in real time based

on the latest data.

Proper use

The Porsche Home Energy Manager is primarily used

to safeguard the electricity supply (blackout protection)

by preventing the building's main fuse from tripping.

The following count as improper use:

Carrying out your own modifications or additions

to the Porsche Home Energy Manager.

All other use of the Porsche Home Energy

Manager not described in these instructions.

OPERATING INSTRUCTIONS HEM V.1.1 DE Page 7of 18

Overview and specification

Fig. 1: Integration of the Home Energy Manager

Page 8of 18 OPERATING INSTRUCTIONS HEM

V.1.1 DE

Displays and controls

Fig. 2: Home Energy Manager displays and controls

OPERATING INSTRUCTIONS HEM V.1.1 DE Page 9of 18

Item

Meaning

Description

Power status On/Off

On: LED lights up green

Backend status

On/Off

On: LED lights up green

WiFi status On/Off

LED flashes blue:

No client connected

LED lights up blue:

At least one client connected

LED flashes green:

No network connection

LED lights up green:

Network connection present

PLC network status

On/Off

LED flashes green:

Attempting network

connection

LED lights up green:

Network connection present

Ethernet status

On/Off

LED lights up green:

Network connection present

RS485/CAN status

Item

Meaning

Description

Status: Error

LED lights up amber:

Warning, error present

LED lights up red:

Warning, critical error

WPS button

Press button briefly (< 1 sec)

to establish a hotspot

WiFi button

(access point)

Press button briefly (< 1 sec)

to switch on WiFi

Press and hold button (>

1 sec) to switch off WiFi

PLC network

button

Press button briefly (< 1 sec)

to switch on PLC network

CTRL button

Press CTRL (< 5 sec) to

restart the software

Press CTRL+ RESET

(>5 sec, <10 sec) to reset the

configuration

Press CTRL+ RESET

(>10 sec) to restore the

default settings

RESET button

Page 10 of 18 OPERATING INSTRUCTIONS HEM

V.1.1 DE

Connections on top of device

Fig. 3: View of connections on top of the device

Overview of device connections

Item

Designation

Voltage

measurement

Current sensors

WiFi antenna

Andere Handbücher für Home Energy Manager

Inhaltsverzeichnis

Andere Porsche Autozubehör Handbücher

Porsche

Porsche CDR 210 Bedienungsanleitung

Porsche

Porsche Mobile Charger Plus Versionshinweis

Porsche

Porsche 992.044.885 Bedienungsanleitung

Porsche

Porsche Cooler Bag Bedienungsanleitung

Porsche

Porsche Mobile Charger Versionshinweis

Porsche

Porsche Mobile Charger Bedienungsanleitung

Porsche

Porsche PCM Bedienungsanleitung

Porsche

Porsche Mobile Charger Connect Bedienungsanleitung

Porsche

Porsche 7PP.971.675.J Bedienungsanleitung

Porsche

Porsche Home Energy Manager Bedienungsanleitung

Porsche

Porsche Wall Charger Connect Technisches Datenblatt

Porsche

Porsche Home Energy Manager Bedienungsanleitung

Porsche

Porsche USB-CDR30 Bedienungsanleitung

Porsche

Porsche Mobile Charger Connect Bedienungsanleitung

Porsche

Porsche Mobile Charger Connect Bedienungsanleitung

Porsche

Porsche Connect Bedienungsanleitung

Porsche

Porsche 7PP.971.675.AA Bedienungsanleitung

Porsche

Porsche 7PP.971.675.J Bedienungsanleitung

Porsche

Porsche WAP0800010LWCP Montageanleitung

Porsche

Porsche 9Y0.915.686.A Bedienungsanleitung

Porsche

Porsche A2DIY-CR12 Bedienungsanleitung

Porsche

Porsche 997.044.901.77 Bedienungsanleitung

Porsche

Porsche Mobile Charger Bedienungsanleitung

Porsche

Porsche 01-B Benutzerhandbuch

Beliebte Autozubehör Handbücher anderer Marken

James Baroud

James Baroud Odyssey Bedienungsanleitung

Motorola

Motorola i50sx Bedienungsanleitung

Yakima

Yakima 9MM STANDARD BIKE MOUNT Bedienungsanleitung

Feniex

Feniex T3 Bedienungsanleitung

Kia

Kia E8300-4D000 Bedienungsanleitung

Brink

Brink 756843 Bedienungsanleitung

Whispbar

Whispbar K085W Bedienungsanleitung

v.link

v.link CI-VL2-PC-HSD Bedienungsanleitung

Viking

Viking Stack-Rack Kurzanleitung zur Einrichtung

Aries

Aries 203015 Bedienungsanleitung

Choetech

Choetech AT0005 Bedienungsanleitung

ZZ2

ZZ2 ZZAIR-PRO Bedienungsanleitung

Holman

Holman 4A80L Bedienungsanleitung

Thule

Thule 2075 Bedienungsanleitung

Motorola

Motorola T325 Bedienungsanleitung

TAUBENREUTHER

TAUBENREUTHER 16-3950 Installationsanleitung

DV8

DV8 FBJL-02 Bedienungsanleitung

Prorack

Prorack K1163 Bedienungsanleitung