Porter-Cable C6001 Bedienungsanleitung

Française : Page 20

Español: Página 41

Air Compressor

Compresor de aire

Compresseur d’air

Instruction manual

Manuel d'instructions

Manual de'instrucciones

www.deltaportercable.com

INSTRUCTIVO DE OPERACIÓN, CENTROS

DE SERVICIO Y PÓLIZA DE GARANTÍA.

LÉASE ESTE INSTRUCTIVO

ANTES DE USAR EL PRODUCTO.

Maintenance-free pump

La pompe sans entretien

La bomba sin mantenimiento

C6001

2 - ENG

SAFETY GUIDELINES - DEFINITIONS

This manual contains information that is important for you to know and under-

stand. This information relates to protecting YOUR SAFETY and PREVENTING

EQUIPMENT PROBLEMS. To help you recognize this information, we use the

symbols below. Please read the manual and pay attention to these symbols.

Indicates an

imminently hazardous situation which,

if not avoided, will result in death or

serious injury.

Indicates a potentially

hazardous situation which, if not

avoided, may result in minor or

moderate injury.

Indicates a potentially

hazardous situation which, if not

avoided, could result in death or

serious injury.

Indicates a practice

not related to personal injury which,

if not avoided, may result in property

damage.

IMPORTANT SAFETY INSTRUCTIONS

This product contains chemicals known to the State of California

to cause cancer, and birth defects or other reproductive harm. Wash hands after

handling.

Some dust contains chemicals known to the State of California

to cause cancer, birth defects or other reproductive harm such as asbestos and

lead in lead based paint.

To reduce the risk of injury, read the instruction manual.

SAVE THESE INSTRUCTIONS

HAZARD

RISK OF EXPLOSION OR FIRE

WHAT CAN HAPPEN HOW TO PREVENT IT

• It is normal for electrical

contacts within the motor and

pressure switch to spark.

• Always operate the compressor in a

well ventilated area free of combustible

materials, gasoline, or solvent vapors.

• If electrical sparks from

compressor come into

contact with flammable

vapors, they may ignite,

causing fire or explosion.

• If spraying flammable materials,

locate compressor at least 20' (6.1 m)

away from spray area. An additional

length of air hose may be required.

• Store flammable materials in a secure

location away from compressor.

3 - ENG

• Restricting any of the

compressor ventilation

openings will cause

serious overheating and

could cause fire.

• Never place objects against

or on top of compressor.

• Operate compressor in an open

area at least 12" (30.5 cm) away

from any wall or obstruction that

would restrict the flow of fresh air

to the ventilation openings.

• Operate compressor in a clean, dry

well ventilated area. Do not operate unit

in any confined area. Store indoors.

• Unattended operation of this

product could result in personal

injury or property damage.

To reduce the risk of fire, do

not allow the compressor

to operate unattended.

• Always remain in attendance with

the product when it is operating.

• Always turn off and unplug

unit when not in use.

HAZARD

RISK TO BREATHING (ASPHYXIATION)

WHAT CAN HAPPEN HOW TO PREVENT IT

• The compressed air directly

from your compressor is not

safe for breathing. The air

stream may contain carbon

monoxide, toxic vapors,

or solid particles from the

air tank. Breathing these

contaminants can cause

serious injury or death.

• Never use air obtained directly

from the compressor to supply

air for human consumption. The

compressor is not equipped with

suitable filters and in-line safety

equipment for human consumption.

• Exposure to chemicals in dust

created by power sanding,

sawing, grinding, drilling,

and other construction

activities may be harmful.

• Sprayed materials such as

paint, paint solvents, paint

remover, insecticides, weed

killers, may contain harmful

vapors and poisons.

• Work in an area with good cross

ventilation. Read and follow the safety

instructions provided on the label or

safety data sheets for the materials

you are spraying. Always use certified

safety equipment: NIOSH/OSHA

respiratory protection or properly fit-

ting face mask designed for use

with your specific application.

4 - ENG

HAZARD

RISK OF BURSTING

Air Tank: On February 26, 2002, the U.S. Consumer Product Safety Commission

published Release # 02-108 concerning air compressor tank safety:

Air compressor receiver tanks do not have an infinite life. Tank life is dependent

upon several factors, some of which include operating conditions, ambient condi-

tions, proper installations, field modifications, and the level of maintenance. The

exact effect of these factors on air receiver life is difficult to predict.

If proper maintenance procedures are not followed, internal corrosion to the

inner wall of the air receiver tank can cause the air tank to unexpectedly rupture

allowing pressurized air to suddenly and forcefully escape, posing risk of injury

to consumers.

Your compressor air tank must be removed from service by the end of the year

shown on your tank warning label.

The following conditions could lead to a weakening of the air tank, and result in

a violent air tank explosion:

WHAT CAN HAPPEN HOW TO PREVENT IT

• Failure to properly drain

condensed water from

air tank, causing rust and

thinning of the steel air tank.

• Drain air tank daily or after each use.

If air tank develops a leak, replace

it immediately with a new air tank

or replace the entire compressor.

• Modifications or attempted

repairs to the air tank. • Never drill into, weld, or make any

modifications to the air tank or its

attachments. Never attempt to

repair a damaged or leaking air

tank. Replace with a new air tank.

• Unauthorized modifications

to the safety valve or any

other components which

control air tank pressure.

• The air tank is designed to withstand

specific operating pressures.

Never make adjustments or parts

substitutions to alter the factory

set operating pressures.

• High vibration or impact forces

can weaken tank structure. • Do not permanently mount the

compressor in a motor vehicle, trailer

or other location where tank may be

subjected to vibration or impact.

Attachments & accessories:

• Exceeding the pressure

rating of air tools, spray guns,

air operated accessories,

tires, and other inflatables

can cause them to explode

or fly apart, and could

result in serious injury.

• Follow the equipment manufacturers

recommendation and never exceed

the maximum allowable pressure

rating of attachments. Never use

compressor to inflate small low

pressure objects such as children’s

toys, footballs, basketballs, etc.

5 - ENG

Tires:

• Over inflation of tires could

result in serious injury

and property damage.

• Use a tire pressure gauge to check

the tires pressure before each use

and while inflating tires; see the tire

sidewall for the correct tire pressure.

NOTE: Air tanks, compressors and similar

equipment used to inflate tires can fill

small tires very rapidly. Adjust pressure

regulator on air supply to no more than

the rating of the tire pressure. Add air

in small increments and frequently use

the tire gauge to prevent over inflation.

HAZARD

RISK OF ELECTRICAL SHOCK

WHAT CAN HAPPEN HOW TO PREVENT IT

• Your compressor is powered

by electricity. Like any other

electrically powered device,

if it is not used properly it

may cause electric shock.

• Never operate the compressor outdoors

when it is raining or in wet conditions.

• Never operate compressor with

protective covers removed or damaged.

• Repairs attempted by

unqualified personnel can

result in serious injury or

death by electrocution.

• Any electrical wiring or repairs

required on this product should be

performed by authorized service

center personnel in accordance with

national and local electrical codes.

• Electrical Grounding:

Failure to provide adequate

grounding to this product

could result in serious injury

or death from electrocution.

Refer to Grounding

Instructions paragraph in

the Installation section.

• Make certain that the electrical

circuit to which the compressor

is connected provides proper

electrical grounding, correct voltage

and adequate fuse protection.

HAZARD

RISK FROM FLYING OBJECTS

WHAT CAN HAPPEN HOW TO PREVENT IT

• The compressed air stream can

cause soft tissue damage to

exposed skin and can propel

dirt, chips, loose particles,

and small objects at high

speed, resulting in property

damage or personal injury.

• Always wear certified safety equipment:

ANSI Z87.1 eye protection (CAN/

CSA Z94.3) with side shields

when using the compressor.

• Never point any nozzle or sprayer

toward any part of the body or

at other people or animals.

• Always turn the compressor off and

bleed pressure from the air hose and

air tank before attempting maintenance,

attaching tools or accessories.

6 - ENG

HAZARD

RISK OF HOT SURFACES

WHAT CAN HAPPEN HOW TO PREVENT IT

• Touching exposed metal

such as the compressor

head, engine head, engine

exhaust or outlet tubes, can

result in serious burns.

• Never touch any exposed metal parts

on compressor during or immediately

after operation. Compressor will remain

hot for several minutes after operation.

• Do not reach around protective

shrouds or attempt maintenance

until unit has been allowed to cool.

HAZARD

RISK FROM MOVING PARTS

WHAT CAN HAPPEN HOW TO PREVENT IT

• Moving parts such as the

pulley, flywheel, and belt

can cause serious injury

if they come into contact

with you or your clothing.

• Never operate the compres-

sor with guards or covers which

are damaged or removed.

• Keep your hair, clothing, and gloves

away from moving parts. Loose

clothes, jewelry, or long hair can

be caught in moving parts.

• Air vents may cover moving parts

and should be avoided as well.

• Attempting to operate

compressor with damaged or

missing parts or attempting

to repair compressor with

protective shrouds removed

can expose you to moving parts

and can result in serious injury.

• Any repairs required on this product

should be performed by authorized

service center personnel.

HAZARD

RISK OF UNSAFE OPERATION

WHAT CAN HAPPEN HOW TO PREVENT IT

• Unsafe operation of your

compressor could lead

to serious injury or death

to you or others.

• Review and understand all instruc-

tions and warnings in this manual.

• Become familiar with the operation

and controls of the air compressor.

• Keep operating area clear of all

persons, pets, and obstacles.

• Keep children away from the

air compressor at all times.

7 - ENG

• Do not operate the product when

fatigued or under the influence of alco-

hol or drugs. Stay alert at all times.

• Never defeat the safety fea-

tures of this product.

• Equip area of operation with

a fire extinguisher.

• Do not operate machine with miss-

ing, broken, or unauthorized parts.

• Never stand on the compressor.

HAZARD

RISK OF FALLING

WHAT CAN HAPPEN HOW TO PREVENT IT

• A portable compressor can

fall from a table, workbench,

or roof causing damage to

the compressor and could

result in serious injury or

death to the operator.

• Always operate compressor in a stable

secure position to prevent accidental

movement of the unit. Never operate

compressor on a roof or other elevated

position. Use additional air hose to

reach high

locations.

HAZARD

RISK FROM NOISE

WHAT CAN HAPPEN HOW TO PREVENT IT

• Under some conditions

and duration of use, noise

from this product may con-

tribute to hearing loss.

• Always wear certified safety equipment:

ANSI S12.6 (S3.19) hearing protection.

SAVE THESE INSTRUCTIONS

FOR FUTURE USE

8 - ENG

SPECIFICATIONS

Model No. C6001

Running Horsepower 1.1 *

Bore 1.875" (47.6 mm)

Stroke 1.250" (31.8 mm)

Voltage/Hz-Single Phase 120/60

Minimum Branch Circuit Requirement 15 amps

Branch Circuit Fuse Type Time Delay

Air Tank Capacity 17 Gallon (64.4 liters)

Approximate Cut-in Pressure 120 psig

Approximate Cut-out Pressure 150 psig

SCFM @ 40 psig 4.3 *

SCFM @ 90 psig 3.3 *

Regulated Pressure Rating (Approximate) 3–150 psi

Quick Connect Type 1/4" (6.4 mm) Industrial

*Tested per ISO 1217

Refer to Glossary for abbreviations.

GLOSSARY

Become familiar with these terms before operating the unit.

CFM: Cubic feet per minute.

SCFM: Standard cubic feet per minute; a unit of measure of air delivery.

PSIG: Pounds per square inch gauge; a unit of measure of pressure.

Code Certification: Products that bear one or more of the following marks: UL®,

CUL, CULUS, ETL®, CETL, CETLUS, have been evaluated by OSHA certified

independent safety laboratories and meet the applicable Standards for Safety.

Cut-In Pressure: While the motor is off, air tank pressure drops as you continue

to use your accessory. When the tank pressure drops to a certain lower level the

motor will restart automatically. The low pressure at which the motor automatically

restarts is called "cut-in" pressure.

Cut-Out Pressure: When an air compressor is turned on and begins to run, air

pressure in the air tank begins to build. It builds to a certain high pressure before

the motor automatically shuts off, protecting your air tank from pressure higher

than its capacity. The high pressure at which the motor shuts off is called "cut-out"

pressure.

Branch Circuit: Circuit carrying electricity from electrical panel to outlet.

DUTY CYCLE

This air compressor pump is capable of running continuously. However, to

prolong the life of your air compressor, it is recommended that a 50%-75%

average duty cycle be maintained; that is, the air compressor pump should not

run more than 30-45 minutes in any given hour.

ACCESSORIES

Accessories for this unit are available at the store the unit was purchased.

The use of any other accessory not recommended for use with

this tool could be hazardous. Use only accessories rated equal to or higher

than the rating of the air compressor.

9 - ENG

ASSEMBLY

UNPACKING

Remove unit from carton and discard all packaging.

INSTALLATION

HOW TO SET UP YOUR UNIT

Location of the Air Compressor

• Locate the air compressor in a clean, dry and well ventilated area.

• The air compressor should be located at least 12" (30.5 cm) away from the

wall or other obstructions that will interfere with the flow of air.

• The air compressor pump and shroud are designed to allow for proper cooling.

The ventilation openings on the compressor are necessary to maintain proper

operating temperature. Do not place rags or other containers on or near these

openings.

GROUNDING INSTRUCTIONS

RISK OF ELECTRICAL SHOCK. In the event of a short circuit,

grounding reduces the risk of shock by providing an escape wire for the

electric current. This air compressor must be properly grounded.

The portable air compressor is equipped with a cord having a grounding wire with

an appropriate grounding plug (see following illustrations).

1. The cord set and plug with this unit contains a grounding pin. This plug

MUST be used with a grounded outlet.

IMPORTANT: The outlet being used must

Grounded

Outlets

Plug

Grounding Pin

be installed and grounded in accordance

with all local codes and ordinances.

2. Make sure the outlet being used

has the same configuration as the

grounded plug. DO NOT USE AN

ADAPTER. See illustration.

3. Inspect the plug and cord before each

use. Do not use if there are signs of damage.

4. If these grounding instructions are not completely understood, or if in doubt as

to whether the compressor is properly grounded, have the installation checked

by a qualified electrician.

RISK OF ELECTRICAL SHOCK. IMPROPER GROUNDING CAN

RESULT IN ELECTRICAL SHOCK.

Do not modify the plug provided. If it does not fit the available outlet, a correct

outlet should be installed by a qualified electrician.

Repairs to the cord set or plug MUST be made by a qualified electrician.

EXTENSION CORDS

If an extension cord must be used, be sure it is:

• a 3-wire extension cord that has a 3-blade grounding plug, and a 3-slot

receptacle that will accept the plug on the product

• in good condition

• no longer than 50' (15.2 m)

• 12 gauge (AWG) or larger. (Wire size increases as gauge number decreases.

10 AWG and 8 AWG may also be used. DO NOT USE 14 OR 16 AWG.)

10 - ENG

Risk of Property Damage. The use of an undersized extension cord

will cause voltage to drop resulting in power loss to the motor and overheating.

Instead of using an extension cord, increase the working reach of the air hose by

attaching another length of hose to its end. Attach additional lengths of hose as

needed.

VOLTAGE AND CIRCUIT PROTECTION

Refer to the Specification Chart for the voltage and minimum branch circuit

requirements.

Risk of Opertion. Certain air compressors can be operated on a 15

amp circuit if the following conditions are met.

1. Voltage supply to circuit must comply with the National Electrical Code.

2. Circuit is not used to supply any other electrical needs.

3. Extension cords comply with specifications.

4. Circuit is equipped with a 15 amp circuit breaker or 15 amp time delay fuse.

NOTE: If compressor is connected to a circuit protected by fuses, use only

time delay fuses. Time delay fuses should be marked "D" in Canada and "T"

in the US.

If any of the above conditions cannot be met, or if operation of the compressor

repeatedly causes interruption of the power, it may be necessary to operate it from

a 20 amp circuit. It is not necessary to change the cord set.

Transporting

When transporting the compressor in a vehicle, trailer, etc., make sure the tank

is drained and the unit is secured with straps to prevent tipping. Use care when

driving to prevent tipping the unit over in the vehicle. Damage can occur to the

compressor or surrounding items if the compressor is tipped.

Lifting

Always use two people when lifting and lift from the A

recommended lift points (A). DO NOT lift by wheels or shroud.

Moving

The wheels and handle do not provide

adequate clearance, stability, or support for pulling the

unit up and down stairs or steps. The unit must be lifted

or pushed up a ramp.

1. Grasp handle of compressor and tilt compressor

back to rest on wheels.

Risk of Unsafe Operation. Ensure proper

footing and use caution when rolling compressor so that

unit does not tip or cause loss of balance.

2. When location is reached slowly lower compressor to ground. Always

store compressor in a vertical position resting on the rubber bumpers

and wheels.

Andere Handbücher für C6001

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Porter-Cable Luftkompressor Handbücher

Porter-Cable

Porter-Cable CPLKC7080V2-1 Bedienungsanleitung

Porter-Cable

Porter-Cable CPF4515 Bedienungsanleitung

Porter-Cable

Porter-Cable PCFP02040 Bedienungsanleitung

Porter-Cable

Porter-Cable CFFN251N-P Bedienungsanleitung

Porter-Cable

Porter-Cable CPLC7060V Bedienungsanleitung

Porter-Cable

Porter-Cable PXCMF226VW Bedienungsanleitung

Porter-Cable

Porter-Cable JOB BOSS CFFC350B Bedienungsanleitung

Porter-Cable

Porter-Cable C2002 Bedienungsanleitung

Porter-Cable

Porter-Cable CFFN250N Bedienungsanleitung

Porter-Cable

Porter-Cable C2002-WK Bedienungsanleitung

Porter-Cable

Porter-Cable CPL6025 Bedienungsanleitung

Porter-Cable

Porter-Cable N003568 Bedienungsanleitung

Porter-Cable

Porter-Cable CPF4515 Bedienungsanleitung

Porter-Cable

Porter-Cable 888971-992 Bedienungsanleitung

Porter-Cable

Porter-Cable CPLDC2541S Bedienungsanleitung

Porter-Cable

Porter-Cable CPL55GH8W Bedienungsanleitung

Porter-Cable

Porter-Cable PXCMSAC420VW Bedienungsanleitung

Porter-Cable

Porter-Cable PXCM301 Bedienungsanleitung

Porter-Cable

Porter-Cable CPLC7060V Bedienungsanleitung

Porter-Cable

Porter-Cable C2002 Bedienungsanleitung

Porter-Cable

Porter-Cable C6001 Bedienungsanleitung

Porter-Cable

Porter-Cable JOB BOSS C3150 Bedienungsanleitung

Porter-Cable

Porter-Cable J0B BOSS C3151 Bedienungsanleitung

Porter-Cable

Porter-Cable C6110 Bedienungsanleitung

Beliebte Luftkompressor Handbücher anderer Marken

Sparmax

Sparmax DC-25XR Bedienungsanleitung

KAESER

KAESER M122 Bedienungsanleitung

GMC

GMC GAC1500 Bedienungsanleitung

Briggs & Stratton

Briggs & Stratton Air Compressor Bedienungsanleitung

Fini

Fini F3GST2TK Bedienungsanleitung

Industrial Air

Industrial Air CP1580325 Programmierhandbuch

Campbell Hausfeld

Campbell Hausfeld RP3300 Kurzanleitung

Ingersoll-Rand

Ingersoll-Rand UP6 20 HP Bedienungsanleitung

Hitachi

Hitachi EC99S Bedienerhandbuch

Parkside

Parkside PKO 270 A1 Bedienungsanleitung

Sullair

Sullair 185 Bedienungsanleitung

Clas Ohlson

Clas Ohlson QIE-ZTH-15 Bedienungsanleitung

Ferm

Ferm CRM1046 Bedienungsanleitung

BE AC153 Bedienungsanleitung

RIDGID

RIDGID OF25150A Bedienungsanleitung

Johnson Controls

Johnson Controls QUANTUM LX Handbuch

Sears

Sears Craftsman 919.167463 Bedienungsanleitung

Ring Automotive

Ring Automotive RAC700 Bedienungsanleitung