6. Resetting the programmed remote control:
1. Press and hold the 'stop' button for 5 seconds on the already programmed remote
control - the UP/DOWN motor movement will confirm successful performance of the
operation.
2. Press the configuration button at the back of the remote control.
5 seconds
PROG.
7. Motor resetting:
Method 1:
1. Press and hold the 'stop' button for 5 seconds on the already programmed remote control -
the UP/DOWN motor movement will confirm successful performance of the operation.
2. Press and hold the 'configuration' button at the back of the remote control for over 7
seconds - once the button is pressed, the motor will move up/down, next after 7 seconds
the double UP/DOWN motor movement will confirm successful configuration.
Method 2:
1. Switch off the power supply to the receiver.
2. Press and hold the 'up' button on any remote control for 4 seconds at the minimum, until
the diode in the remote control lights up permanently. Do not let go of the pressed button.
3. Holding the 'up' button pressed all the time, connect the receiver to power supply. The
UP/DOWN motor movement indicates successful activation of the configuration mode. Let
go of the pressed 'up' button.
4. Press and hold the 'configuration' button at the back of the remote control for over 7
seconds - once the button is pressed, the motor will move up/down, next after 7 seconds
the double UP/DOWN motor movement will confirm successful configuration.
5 seconds
PROG.
min.7 seconds 7 seconds
x2
OFF
min. 4 seconds
ON
PROG.
min.7 seconds
