POSEIDON Salinity Pen Plus+ Bedienungsanleitung

User Guide

Poseidon Flow Technologies sincerely thanks you for

purchasing the Salinity Pen Plus+ (SP+). The SP+is a water

resistant, portable, easy to use instrument that uses electri-

cal conductivity to determine the Salinity/Speciﬁc Gravity of

natural and/or artiﬁcial sea water.

The unit rapidly displays Salinity (ppt), Speciﬁc Gravity (SG)

and temperature (Celsius/Fahrenheit), on an easy to read

LCD screen. The SP+ can also be easily calibrated in seconds

using the included Salinity Standard Solution (30ppt).

This device has been factory tested to provide trouble-free

performance and contains certiﬁed components to

ensure safe, reliable and accurate, lab grade results.

Please read the entire user guide before using

your Salinity Pen Plus+. The information provided

in this manual is subject to change.

For the most up to date information please visit:

www.poseidonﬂow.com/support

User Support ................................................................... Pg 3

Your Pen at a Glance ...................................................... Pg 4

Speciﬁcations................................................................... Pg 6

Pen Calibration................................................................ Pg 6

Pen Usage ........................................................................ Pg 7

Pen Care........................................................................... Pg 8

Customer Support

Many of the steps in this guide have corresponding how-to

videos. View them on the Poseidon Flow Technologies web-

site at poseidonﬂow.com/support-videos

United States and Canada

Contact Poseidon Flow Technologies Directly for all warranty

service and returns. Visit poseidonﬂow.com/support

International

Contact your local distributor directly for all warranty service

and returns. Visit poseidonﬂow.com/retailers

Customer Support

Should you require customer support for your Salinity

Pen Plus+, help is oﬀered in the following ways:

Via Phone:

M-F 8:00AM to 5:00PM EST 1-800-202-FLOW

Via support@poseidonﬂow.com

http://poseidonﬂow.com/support

International Support:

Contact your local distributor directly for all warranty issues

or returns. Visit poseidonﬂow.com/retailers to ﬁnd the

contact information for your Poseidon Flow Distributor.

Sensor – Platinum Plated

Sensor Connecting Cap

DO NOT TURN

Display Panel

Displays measurement values

Battery Cap – Unscrew for battery

access. Requires 2x CR1632 Button

Batteries - Included.

MODE Button – Navigate between

operational modes. Temperature

(Celsius/Fahrenheit), Salinity(PPT), and

Speciﬁc Gravity (SG).

CAL/HOLD Button

Allows measurements to be locked

on the display and is used for Salinity

Calibration.

Power Button – Depress to power the

device on/oﬀ.

Your Salinity Pen Plus+at a Glance

DO NOT SUBMERGE

PAST THIS POINT

Usage Notice

To ensure accurate measurement, clean the sensor tip prior to use,

and promptly after measurement.

Upon completion of testing, rinse the sensor with fresh water, and

ensure to fully dry the sensor using a clean, dry cloth or sponge.

Always keep the sensor dry when not in use.

Use caution when cleaning the platinum sensor. Clean only using a

damp cloth or sponge with a neutral detergent.

DO NOT use chemicals such as acetone or benzene to clean any part

of the instrument.

Avoid storing the instrument in places of high humidity, or where it will

be exposed to direct sunlight, high temperature, dust, or moisture.

Remove the batteries when being stored for extended periods (over

one month).

DO NOT submerge the instrument past the sensor connector (white

collar).

This device IS NOT waterproof. Water Damage IS NOT covered

under warranty.

The Salinity Pen Plus+ is now ready for use!

It is recommended to recalibrate the Salinity Pen

Plus+ before each use.

Calibration of the Salinity Pen Plus+

Calibration of testing equipment is essential for accurate

and consistent results, and your new Salinity Pen Plus+is no

exception. All instruments are tested before they leave the

factory however, it is good practice to calibrate your Salinity

Pen Plus+before use.

Calibration Procedure:

Step 1: Turn on the Salinity Pen Plus+by depressing the

POWER button.

Step 2: Press the Mode button until the display reads PPT.

The calibration procedure WILL NOT WORK if the pen is not

in PPT mode.

Step 3: Immerse the tip of the pen in the calibration solu-

tion. NOTE: When not in use, the calibration solution should be

stored at room temperature.

Step 4: Press and hold the CAL/HOLD button for 10 full sec-

onds until you see the CAL message display on the LCD.

Correct

Proper Salinity Pen Plus+Usage Notice

Measurement:

Keep the sensor at least 0.5” (1cm) away from all edges of

the container when measuring.

Incorrect

Rinse the sensor with fresh water prior to measurement.

2. Press the Power Button to turn the device on.

a) The unit displays temperature measurement in real

time. To toggle between Celsius/Fahrenheit press and

hold the MODE button for 3 seconds until the unit

change is observed on the display.

b) Press the MODE button to toggle between testing

modes. Salinity (ppt), Speciﬁc Gravity (SG) and tem-

perature (Celsius/Fahrenheit),

3. Immerse the tip of the sensor into the aquarium water.

Shake the sensor back and forth 5 times to remove

any air bubbles on the surface of the sensor, which will

cause an error of measurement.

a. Read the value after the measurement be-

comes stable.

4. Press the CAL/HOLD button to lock the measured value

on the display.

5. After measurement rinse the sensor with fresh water,

ensure to fully dry the sensor using a clean, dry cloth or

sponge. Always keep the sensor dry when not in use.

**WARNING!**

Air bubbles stuck to the sensor after it is

immersed into the water will lead to

measurement errors.

Always shake the sensor back and fourth ﬁve times to

remove these bubbles.

Poseidon Flow Technologies warrants to the original purchaser only that the Salinity Pen Plus+will be free from

defects in material and workmanship under normal use for a period of (1) year from the date of original purchase if

the product used consistent with the User Manual.

The Salinity Pen Plus+consists of a Platinum Plated Sensor that will be immersed in the aquarium and the main

unit body that must not be exposed to water at any time. Poseidon Flow Technologies warranty shall not apply:

(i) to any damaged Salinity Pen Plus+that has been subjected to accident, misuse, neglect, alteration, acts of

God, improper handling, improper transport, improper storage, improper use or application, improper testing

or unauthorized repair, (ii) to any Salinity Pen Plus+where the main body has been exposed to water or (iii)

to cosmetic problems or defects that result from normal wear and tear under ordinary use, and do not aﬀect

the performance or use of the product. Poseidon Flow Technologies warranty applies only to a product that is

manufactured by or for Poseidon Flow Technologies and identiﬁed by the Poseidon Flow Technologies trademark,

trade name or product identiﬁcation logo aﬃxed to the product. If you notice a problem with your Salinity Pen

Plus+, do not attempt to repair it yourself. Any attempts at self-repair shall void this limited warranty. Poseidon Flow

Technologies shall not be held liable for damage to any aquarium, aquarium life forms, or other personal objects

due to improper use of the device. If the product develops a covered defect within the one-year period, Poseidon

Flow Technologies will, at its option, either repair or replace the Salinity Pen Plus+without charge, provided that the

Salinity Pen Plus+is returned during the warranty period.

To obtain warranty service or technical support, please contact Poseidon Flow Technologies customer service

department at 1-888-202-FLOW. You will receive instructions on how to return the product for repair or

replacement. To take advantage of this Limited Warranty you will be required to supply an original point of purchase

receipt.

POSEIDON FLOW TECHNOLOGIES DISCLAIMS ALL OTHER WARRANTIES WHETHER ORAL OR WRITTEN, EXPRESS

OR IMPLIED, TO THE FULLEST EXTENT ALLOWED BY APPLICABLE LAW. NO IMPLIED WARRANTY OF FITNESS

FOR A PARTICULAR PURPOSE OR MERCHANTABILITY SHALL APPLY EXCEPT AS REQUIRED BY APPLICABLE LAW.

POSEIDON FLOW TECHNOLOGIES DOES NOT AUTHORIZE ANY PERSON OR BUSINESS ENTITY, INCLUDING

ITS AUTHORIZED DEALERS, TO CREATE FOR IT ANY OBLIGATIONS, LIABILITIES, OR OTHER WARRANTIES IN

CONNECTION WITH THIS PRODUCT.

ALL WARRANTIES ARE VOID IF THERE IS DAMAGE TO THE SALINITY PEN PLUS+ THAT IS NOT A RESULT OF A

DEFECT IN THE MATERIALS OR WORKMANSHIP. THE SOLE AND EXCLUSIVE REMEDY FOR ALL CLAIMS THAT

YOU MAY HAVE ARISING OUT OF OR IN CONNECTION WITH YOUR USE OF THIS PRODUCT, WHETHER MADE OR

SUFFERED BY YOU OR ANOTHER PERSON AND WHETHER BASED IN CONTRACT OR TORT, SHALL BE REPAIR OR

REPLACEMENT OF THE PRODUCT. IN NO EVENT WILL POSEIDON FLOW TECHNOLOGIES BE LIABLE TO YOU OR

ANY OTHER PARTY FOR ANY DIRECT, INDIRECT, GENERAL, SPECIAL, INCIDENTAL, CONSEQUENTIAL, EXEMPLARY

OR OTHER DAMAGES ARISING OUT OF THE USE OR INABILITY OF TO USE THE PRODUCT (INCLUDING, WITHOUT

LIMITATION, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, LOSS OF INFORMATION

OR ANY OTHER PECUNIARY LOSS, DAMAGE TO YOUR AQUARIUM OR ANY AQUARIUM INHABITANTS), OR FROM

ANY BREACH OF WARRANTY, EVEN IF POSEIDON FLOW TECHNOLOGIES HAS BEEN ADVISED OF THE POSSIBILITY

OF SUCH DAMAGES. IN NO CASE SHALL POSEIDON FLOW TECHNOLOGIES LIABILITY EXCEED THE AMOUNT YOU

PAID FOR THE PRODUCT. IF YOU DISAGREE WITH THESE TERMS AND CONDITIONS DO NOT USE THE SALINITY

PEN PLUS+.

No part of this publication may be reproduced or transmitted in any form or by any means, electronic or

mechanical, including but not limited to photocopying, recording, information retrieval systems, or computer

network without the written permission of Poseidon Flow Technologies.

Poseidon Flow Technologies and all other Poseidon Flow Technologies product names and slogans are

trademarks or registered trademarks of Poseidon Flow Technologies.

CE Declaration of Conformity: The equipment complies with the Directive 2004/108/EC relating to electromagnetic

compatibility. This equipment meets the following conformance standards: EN 61326-1:2006.

Inhaltsverzeichnis

Andere POSEIDON Messgerät Handbücher

POSEIDON

POSEIDON 3266 Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

ELMETRON

ELMETRON CP-511 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

EXFO

EXFO FTB-2 Bedienungs- und Wartungshandbuch

Keysight

Keysight M8290A Bedienungsanleitung

ADTEK

ADTEK MW-5 Bedienungsanleitung