PowerWalker VI 1000 Bedienungsanleitung

POWERWALKER

Uninterruptible Power Supply

Line Interactive VI 1000/1400/2000

User’s Manual

28-2PW0000003

Thank you for purchasing PowerWalker UPS.

Safety information and operating instructions

are included in this manual. To ensure the

correct use of the UPS, please read this

manual thoroughly before operate it. And

save this manual properly.

PowerWalker VI series is an intelligent and compact line interactive UPS which is

designed to protect your personal computer or sensitive electronic equipments. The UPS is

equipped with advanced microprocessor controlled and included built-in boost and buck

AVR to prevent the equipment damage and data loss. The UPS can be automatically started

up without AC power supplied. The special feature is that hot-swappable/user replaceable

battery is easy to replace or change in case of battery. In addition, this UPS provides

advanced modem or telephone line surge protection, and the small footprint tower design

can be placed on your desk space or floor. It is equipped with many features that allow

any attached equipment to operate longer and more reliability. PowerWalker VI series

protects computer systems, servers, storage systems, and network peripherals from

blackouts, power surges, and spikes.

Description of Features:

Compact size and light weight design which can be placed on the cabinet or desk

Utilized microprocessor control to maximize the reliability and efficiency

Equipped with built-in boost and buckAVR to prevent the equipment damage

and data loss

Cold start capability enables UPS can be automatically turned on in battery

mode during blackout

Include discharge, overcharge, and overload protection

Provides advanced telephone/fax or modem surge suppression protection

Built-in RS-232 with connecting intelligent monitoring software

User-replaceable batteries allow on-site battery replacement

USB available(optional)

Please save this manual properly. This manual includes important safety

information. Please read it carefully and thoroughly before operating the UPS.

Comply with all the warnings and operating instructions on the unit and in the

manual strictly.

To reduce the risk of electric shock, the user must disconnect the UPS from the mains

supply before installing any cable.

To reduce the risk of electric shock. Do not attempt to disassemble the UPS. This

UPS is no user serviceable parts inside. Please contact qualified service personnel

to do any service.

Do not connect with laser printers, cosmetic appliances, medical equipments,

microwave ovens, vacuum cleaners or heavy duty hardware to UPS because they

take too much power.

Do not dispose of batteries in a fire. They may explore.

Do not open or mutilate batteries. They contain an electrolyte that is toxic and

harmful to the skin and eyes.

Do not allow liquid or foreign object to enter inside of UPS.

Do not block off ventilation openings in the UPS system’s housing.

Do not place the UPS near water or in environments of excessive humidity.

Remove personal metal items such as rings, bracelets, necklaces, and watches when

working with batteries. Batteries can produce a short-circuit current high enough to

make metal melt, and could cause severe burns.

When replacing batteries, replace with the same number of the sealed lead-acid

batteries.

1. INTRODUCTION 2. SAFETY REQUIREMENTS

Front Panel

1. ON/OFF Button

Press the On/Off button to turn on or off

2. Fault LED

- The Fault LED will be on and beeps continuously when the UPS is at faulty condition.

3. On-Line Indicator

- Load Level LEDs

Backup Indicator

- Battery Capacity LEDs

4. On-Line Indicator

- The green light indicator illuminates when the input line voltage is normal

Backup Indicator

- The green light indicator flashes when the internal battery is being used

Back Panel

1. Battery Power Supplied Receptacle

The power supplied receptacles are used for battery to power up your equipments

while AC is failure.

2. AC Input Power Receptacle

The power receptacle is used to plug in the power cord that provides power to the

UPS

3. Circuit Breaker

The circuit breaker is used to protect your equipment against the event of short-circuit

or system overload

4. Telephone/Fax/Modem Surge Suppression Port

This surge suppression port is used to protect the telephone or modem line while

connecting the INTERNET service

5. RS-232 Communication Port

This communication port is used to communicate with a computer or modem and

support the operating systems

6. USB Communication Port (optional)

This USB communication port is used by downloaded software

3. OVERVIEW

1000VA 1400VA/2000VA

Before the installation, please ensure the power switch on the UPS is in “OFF”

position, and the voltage of the AC utility source corresponds to the identification label

on the rear panel.

1. Inspection

Inspect the UPS upon the receipt. If there is any damage, please report it to dealer

immediately. The packaging is used recyclable material, please save it for reuse or

dispose of it properly.

2. Placement

Install the UPS in a protected area within a temperature range from 0 - 40℃and

relative humidity of 0 - 90% without condensing. And place the UPS in a location

free from excessive dust and chemical fumes. Please notice that the UPS voltage and

power rating match to the line voltage and load requirements.

3. Connection

Connect the power cord to the utility power to power up the UPS. Press “ON” button

to turn on the UPS, the green light indicator illuminates that AC utility voltage is

present.

4. Charge the Battery

Charge the battery automatically when UPS is connected to utility power. Some

charges may be lost. It is recommended that the battery will be re-charged for at least

8 hours before using the UPS.

5. Connect the Computer

Connect the interface cable from your computer to the output receptacles on the back

panel of the UPS.

6. Connect the Telephone/Modem Line

Connect a single telephone cable into the “IN” telephone/modem surge suppression

port on the back of the UPS. Require another length of telephone cable to connect

into “OUT” telephone/modem port on the back of UPS to the modem input socket.

7. Connect the RS-232/USB*Communication Port

Connect a RS-232 serial cable/USB cable from RS-232/USB communication port on

the back of the UPS to Computer Systems that will be auto detected.

Green Mode Function(1000VA only)

“Green mode” enables to save the power if none of the load is connecting.

9. DC Start Function

When the power is not supplied from AC utility, DC start function will be started up

automatically.

10. Switch Off

Press “OFF” button to turn off the UPS after use or test.

*optional

4. INSTALLATION

Before battery replacement, please ensure the power switch on the UPS is in “OFF”

position.

Step 1: Remove the front panel of the UPS

Step 2: Unscrew and remove the battery bracket

Step 3: Disconnect the battery cable and pull the battery out onto a flat

area

Step 4: Slide the new battery and reconnect the battery cable by

screwing up the battery retaining battery bracket

Step 5: Close and reinstall the front panel of the UPS

After the UPS has been installed, you must install the software(Smart Power) that

came packaged with your UPS. Smart Power monitoring software performs the

monitoring and controlling functions. This software displays the status and diagnostic

symptoms on the monitor. In case of the power failure, it provides the auto shutdown

for the computer.

If you download the software from Internet, please key the serial number:

726T25-4791-2N39546.

6. MONITORING SOFTWARE5. BATTERY REPLACEMENT

To call for service, please have the model, serial number, and description of

the problem available.

MODEL

PowerWalker

1000 PowerWalker

1400 PowerWalker

2000

CAPACITY VA/W 1000VA/600W 1400VA/840W 2000VA/1080W

INPUT Voltage 110/120VAC or 220/230/240VAC

Voltage Range 89-145VAC or

170-280VAC 85-140VAC or 162-290VAC

Frequency 45-65 Hz (Auto Sensing)

OUTPUT Voltage (Batt.

Mode) 110/120/220/230/240VAC +/-10%

Frequency (Batt.

Mode) 50Hz or 60Hz +/-1 Hz

Output

Waveform

(Battery mode) Modified Sinewave

BATTERY

Battery Type 12V7Ah x 2 12V9Ah x 2

Backup Time (at

a PC load with

15” monitor) 40 minutes 25 minutes 26 minutes

Recharge Time 8 hours to 90% after complete discharge

TRANSFER

TIME Typical : 4-6 ms

INDICATOR AC Mode 1

green LED lighting

to 5

green LEDs lighting indicating load level

Backup Mode 1

green LED flahsing

to 5

green LEDs lighting indicating battery capacity

Fault Red LED lighting

AUDIBLE

ALARM Backup Mode Sounding every 10 seconds

Low Battery Sounding every second

Overload Sounding every 0.5 second

Fault Continuously sounding

PROTECTION Full Protection Discharge, overcharge, and overload protection

PHYSICAL Dimension

DxWxH (mm) 368.3 x 140.2 x 180.4

Weight (kgs) 13.6 14.2 16

ENVIRONMENT Noise Level Less than 45dB

INTERFACE Smart RS-232 Windows family, Sun Solaris, IBM Aix, Compaq True64,

UnixWare, FreeBSD, HP-UX, Linux and MAC

USB Port

(Option) Windows 98/2000/ME/XP

PROBLEM POSSIBLE CAUSE SOLUTION

NO LIGHT (UPS

NOT ON)

1. The power switch is in

“OFF” or not pressed

1. Press power switch to turn on.

2. The voltage for battery is

weak

2. Re-charge the UPS at least 8

hours.

3. Battery failure 3. Replace with the same type of

battery or call for service.

4. Power Connection looses 4. Check the input power and replug

it again

BUZZER BEEPS

CONTINUOUSLY

1. Overload of the UPS.

1. Remove the noncritical load or call

for service.

BACKUPTIME IS

SHORT OR ALWAYS

IN “BATTERY

MODE”

1. Battery failure

1. Replace with same type of battery

or call for service.

2. AC fuse may be burnout. 2. Replace fuse or call for service.

3. Battery is not fully charged. 3. Re-charge the UPS at least 8

hours.

4. Power Connection loses 4. Check the input power and replug

it again

7. TECHNICAL SPEICIFICATION 8. TROUBLE SHOOTING

Andere Handbücher für VI 1000

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere PowerWalker UPS Handbücher

PowerWalker

PowerWalker VFI 3000 LCD Installationsanleitung

PowerWalker

PowerWalker VFI 10000CP 3/3 Bedienungsanleitung

PowerWalker

PowerWalker VFI 6000 AT Bedienungsanleitung

PowerWalker

PowerWalker VI 400 SE Bedienungsanleitung

PowerWalker

PowerWalker VI 400 Bedienungsanleitung

PowerWalker

PowerWalker VFI 6000 LCD Bedienungsanleitung

PowerWalker

PowerWalker VFI 1000 RMG PF1 Bedienungsanleitung

PowerWalker

PowerWalker VI 1200 Bedienungsanleitung

PowerWalker

PowerWalker PowerWalker VFI 10000RT LCD Bedienungsanleitung

PowerWalker

PowerWalker VFI 6000T LCD L Bedienungsanleitung

PowerWalker

PowerWalker VFD 400 IEC Bedienungsanleitung

PowerWalker

PowerWalker VFI 10K-80K CPG 3 Bedienungsanleitung

PowerWalker

PowerWalker PF 1 6K Bedienungsanleitung

PowerWalker

PowerWalker VFI 1000-3000 CG PF1 Bedienungsanleitung

PowerWalker

PowerWalker VFI 10K CPH Bedienungsanleitung

PowerWalker

PowerWalker VFI 10000CRM LCD Bedienungsanleitung

PowerWalker

PowerWalker 6000C LCD Bedienungsanleitung

PowerWalker

PowerWalker VI 1000RT LCD Bedienungsanleitung

PowerWalker

PowerWalker VFI 10000 CG PF1 Bedienungsanleitung

PowerWalker

PowerWalker VFI 1000R LCD Bedienungsanleitung

PowerWalker

PowerWalker VI RLP Series Bedienungsanleitung

PowerWalker

PowerWalker MBP 1-1 Bedienungsanleitung

PowerWalker

PowerWalker VFD 400 Bedienungsanleitung

PowerWalker

PowerWalker 1000 LCD/UK Bedienungsanleitung

Beliebte UPS Handbücher anderer Marken

Pylontech

Pylontech Victron & Pylontech US5000 Bedienungsanleitung

Tecnoware

Tecnoware EVO DSP PLUS MM 6.8 Bedienungsanleitung

Mecer

Mecer ME-1000-WTU Bedienungsanleitung

Mustek

Mustek PowerMust 530(B) Plus Installations- und Betriebshandbuch

Emerson

Emerson Liebert NXL series Bedienungsanleitung

MAKELSAN

MAKELSAN BOXER SERIES Bedienungsanleitung

Block

Block PC-0524-400-0 Bedienungsanleitung

CyberPower

CyberPower CP585LCD Bedienungsanleitung

Eaton

Eaton 3S Montageanleitung

CyberPower

CyberPower Office Tower Series UPS 1000 Bedienungsanleitung

CyberPower

CyberPower BM100 Bedienungsanleitung

Best Power

Best Power 610 Bedienungsanleitung

Best Power

Best Power Unity/I UT3K Bedienungsanleitung

Mustek

Mustek PowerMust 400 Offline Bedienungsanleitung

Xantrex

Xantrex Trace 512 UR-UPS Bedienungsanleitung

Forza

Forza SL-1501UL Bedienungsanleitung

LEGRAND

LEGRAND keor 310081 Bedienungsanleitung

ABB

ABB Conceptpower DPA 500 Bedienungsanleitung