PRECISION DIGITAL Loop Leader PD683 Bedienungsanleitung

PRECISION DIGITAL CORPORATION

233 South Street • Hopkinton MA 01748 USA

Tel (800) 343-1001 • Fax (508) 655-8990

www.predig.com

PD683 & PD688

LOOP-POWERED METERS

Instruction Manual

•2 V drop (5.7 V with backlight)

•5-Digit LCD, 0.6" (15.2 mm) High

•Custom Engineering Units

•20-Segment Bargraph Display

•Type 4X, NEMA 4X, IP65 Front

•Maximum & Minimum Display

•Linear, Square Root, or Programmable Exponent

•Non-Volatile Memory – No Battery Needed

Loop-

Powered

Backlight

Standard!

PD688 only

PD683 & PD688 Loop-Powered Meters Instruction Manual

Disclaimer

The information contained in this document is subject to change

without notice. Precision Digital makes no representations or war-

ranties with respect to the contents hereof, and specifically disclaims

any implied warranties of merchantability or fitness for a particular

purpose.

Registered Trademarks

NORYL®and LEXAN®are registered trademarks of SABIC Innova-

tive Plastics. All other trademarks mentioned in this document are

the property of their respective owners.

PD683 & PD688 Loop-Powered Meters Instruction Manual

INTRODUCTION

The PD688 is an intrinsically safe and non-incendive loop-powered meter

approved for hazardous area locations. The PD683 is a general-purpose

loop-powered meter for safe area applications. The four front panel but-

tons make the setup and programming an easy task. Five digits, bar-

graph, engineering units, and trend arrows provide a clear and attractive

presentation of the process.

The square root and programmable exponent functions allow for condi-

tioning of signals from non-linear transmitters without adding external

components to the system and the convenience of scaling without a cali-

brated signal source make the PD683 & PD688 the ideal choice for pro-

cess display applications.

ORDERING INFORMATION

Model Description

PD683-0K0* Loop-Powered Panel Meter for Safe Area

PD684-0K1 Loop-Powered Rate/Totalizer for Safe Area

PD688-0K0* ATEX/FM/CSA Approved Loop-Powered Panel Meter

PD689-0K1 ATEX/FM/CSA Approved Loop-Powered Rate/Totalizer

Enclosures and Accessories

Model Meters Description Mounting

PDA2407 1 Plastic NEMA 4X Enclosure Inside Cover

PDA2410 3 Plastic NEMA 4X Enclosure Inside Cover

PDA2411 2 Plastic NEMA 4X Enclosure Inside Cover

PDA23XX 1-10 Economical Plastic NEMA 4X Enclosure Through Door

PDA25XX 1-10 Plastic NEMA 4X Enclosure Through Door

PDA26XX 1-6 Stainless Steel NEMA 4X Enclosure Through Door

PDA27XX 1-6 Steel NEMA 4 Enclosure Through Door

PDA2801* 1 Low-Cost Plastic NEMA 4X Enclosure Through Cover

PDA2812 2 Low-Cost Plastic NEMA 4X Enclosure Through Cover

Note: XX = the last two digits of the model number.

Go to www.predig.com to find individual part numbers.

* Quick Shipment Program product, typically shipped within 2 working days

PD683 & PD688 Loop-Powered Meters Instruction Manual

Table of Contents

INTRODUCTION ------------------------------------------------------------ 3

ORDERING INFORMATION --------------------------------------------- 3

SPECIFICATIONS---------------------------------------------------------- 6

General-------------------------------------------------------------------------------6

Input----------------------------------------------------------------------------------- 7

PD688 COMPLIANCE INFORMATION ------------------------------- 8

Ratings and Approvals ---------------------------------------------------------8

SAFETY INFORMATION ------------------------------------------------- 8

INSTALLATION ------------------------------------------------------------- 9

Unpacking--------------------------------------------------------------------------- 9

Panel Mounting--------------------------------------------------------------------9

Wiring Connections------------------------------------------------------------ 10

4-20 mA Input Connections ------------------------------------------------ 11

SETUP AND PROGRAMMING ----------------------------------------12

Front Panel Buttons & Status Indicators ------------------------------- 13

Main Menu Display Functions & Messages---------------------------- 14

Main Menu ------------------------------------------------------------------------ 15

Setting Numeric Values ------------------------------------------------------ 15

Setting Up the Meter (setup)------------------------------------------------ 16

Setting the Decimal Point (deC.pt) --------------------------------------- 16

Setting the Units Display (units)----------------------------------------- 17

Programming the Meter (prog)--------------------------------------------- 18

Scaling the Meter (sCalE) -------------------------------------------------- 19

Calibrating the Meter (Cal)------------------------------------------------- 20

Recalibrating the Internal Calibration Reference (ICal)------------ 20

Setting Up the Bargraph (GrapH) ----------------------------------------- 21

Setting Up the Password (pass) ------------------------------------------- 22

Locking the Meter ------------------------------------------------------------ 22

Unlocking the Meter---------------------------------------------------------- 23

Advanced Features Menu---------------------------------------------------- 24

Advanced Features Menu & Display Messages ---------------------- 25

Math Functions (lnear, Squar, Prog.E, Cutof)----------------------- 26

Contrast (contr) -------------------------------------------------------------- 27

Noise Filter (fltEr) ---------------------------------------------------------- 27

Noise Filter Bypass (bypAs) ----------------------------------------------- 27

Internal Calibration (ICal)-------------------------------------------------- 28

Information Menu (info)---------------------------------------------------- 29

PD683 & PD688 Loop-Powered Meters Instruction Manual

OPERATION ----------------------------------------------------------------30

Front Panel Buttons Operation -------------------------------------------- 30

Maximum & Minimum Readings (Max& MiN) --------------------------- 31

MOUNTING DIMENSIONS ----------------------------------------------32

Reset Meter to Factory Defaults ------------------------------------------- 33

Factory Defaults & User Settings----------------------------------------- 34

TROUBLESHOOTING----------------------------------------------------35

Troubleshooting Tips --------------------------------------------------------- 35

QUICK USER INTERFACE REFERENCE GUIDE----------------36

EU DECLARATION OF CONFORMITY FOR PD688 ------------38

EU DECLARATION OF CONFORMITY FOR PD683 ------------39

Table of Figures

Figure 1. Panel Cutout and Mounting................................................. 9

Figure 2. PD683 & PD688 Rear View.................................................10

Figure 3. PD683 Input Connections with Backlight.........................11

Figure 4. PD683 Input Connections without Backlight ................... 11

Figure 5. Meter Dimensions – Side View .......................................... 32

Figure 6. Case Dimensions – Top View ............................................32

PD683 & PD688 Loop-Powered Meters Instruction Manual

SPECIFICATIONS

Except where noted all specifications apply to operation at +25°C.

General

DISPLAY Five digits

(-99999 to 99999)

0.60" (15.2 mm) high, 7-segment, au-

tomatic lead zero blanking.

Four characters

(Engineering Units)

0.25" (6.4 mm) high, 14 segment.

Bargraph 20-segment, 0% to 100% indication.

Trend arrows Up and down trend indication.

Backlight Orange (intensity varies with signal)

DISPLAY

UPDATE RATE

1 update/second

OVERRANGE Display flashes 99999

UNDERRANGE Display flashes -99999

PROGRAMMING

METHOD

Four front panel buttons

NOISE FILTER Programmable from 1 to 199

RECALIBRATION Recalibration is recommended at least every 12 months.

MAX/MIN

DISPLAY

Max/min readings reached by the process are stored until

reset by the user or until power to the meter is turned off.

PASSWORD Programmable password restricts modification of

programmed settings.

NON-VOLATILE

MEMORY

All programmed settings are stored in non-volatile memory

for a minimum of ten years if power is lost.

NORMAL MODE

REJECTION

64 dB at 50/60 Hz

ENVIRONMENTAL Operating temperature range: -30 to 65°C (-40°C allowed)*

Storage temperature range: -40 to 65°C

Relative humidity: 0 to 90% non-condensing

*Below -30°C, the LCD becomes less readable.

CONNECTIONS Removable screw terminals accept 12 to 22 AWG wire

ENCLOSURE &

MATERIALS

1/8 DIN, high impact plastic, UL 94V-0, color: gray

NORYL® Polyphenylene Ether & Polystyrene blend (PPE

PS) Resin

LEXAN® Polycarbonate (PC) Film

PD683 & PD688 Loop-Powered Meters Instruction Manual

MOUNTING 1/8 DIN panel cutout required. Two panel mounting

bracket assemblies provided

TIGHTENING

TORQUE

Screw terminal connectors: 4.5 lb-in (0.5 Nm)

Mounting screws: 8.0 lb-in max. (0.9 Nm)

OVERALL

DIMENSIONS

4.68" x 2.45" x 3.79" (119 mm x 62 mm x 96 mm)

(W x H x D)

WEIGHT 5.7 oz (162 g)

WARRANTY 3 years parts and labor

EXTENDED

WARRANTY

1 or 2 years, refer to Price List for details

Input

ACCURACY ±0.03% of span ±1 count,

square root and programmable exponent: 10-100% FS

FUNCTION Linear, square root, or programmable exponent

LOW-FLOW

CUTOFF

-99999 to 99999 (-99999 disables cutoff function)

TEMPERATURE

DRIFT

50 PPM/°C from -40 to 65°C ambient

DECIMAL POINT Up to four decimal places:

d.dddd, dd.ddd, ddd.dd,dddd.d,or ddddd

CALIBRATION

RANGE

An Error message will appear if input 1 and input 2 signals

are too close together.

Input

Range

Minimum Span

Input 1 & Input 2

4-20 mA 0.40 mA

VOLTAGE DROP Without Backlight With Backlight

2.0 V maximum 5.7 V maximum

EQUIVALENT RE-

SISTANCE

100 Ω@ 20 mA 285 Ω@ 20 mA

INPUT

OVERLOAD

Over current protection to 2 A max.

PD683 & PD688 Loop-Powered Meters Instruction Manual

PD688 COMPLIANCE INFORMATION

Ratings and Approvals

FM & CSA Certified as intrinsically safe with entity for use in:

Class I, Div 1, 2, Groups ABCD

Class II, Div 1, Groups EFG

Class II, Div 2, Groups FG

Class III, Div 1, 2

Class 1, Zone 0, Group IIC

Non-incendive: Suitable for use in Class I, Div 2, Groups ABCD;

Class II, Div 2, Groups FG; Class III, Div 2.

Entity Parameters: Ui: 30 V; Ii: 175 mA; Ci: 0; Li: 0; Pi: 1.0 W

ATEX II 1G

Ex ia IIC T4

IP65

Ta = -40°C to 65°C

CE EMC Emissions and Immunity:

EN 61326:2013 EMC requirements for Electrical equipment for

measurement and laboratory use – Industrial

IEC 61010-1:2010 & EN 61010-1:2010, including Group and

National Differences as they apply for AU, CA, US and KR

Special Conditions for Safe Use:

The permitted ambient temperature range for the PD688 is -40°C to 65°C.

Year of Construction

This information is contained within the serial number with the first four

digits representing the year and month in the YYMM format.

For FM/CSA applications: The PD688 installation must be performed

in accordance with Control Drawing LIM688-2

For European Community: The PD688 must be installed in accord-

ance with the ATEX directive 94/9/EC, the product certificate

FM08ATEX0058X, and LIM688-2

SAFETY INFORMATION

Installation and service should be per-

formed only by trained

service personnel. Service requiring

replacement of internal components

must be performed at the factory.

CAUTION: Read complete

instructions prior to installation

and operation of the meter.

PD683 & PD688 Loop-Powered Meters Instruction Manual

INSTALLATION

There is no need to remove the meter from its case to com-

plete the installation, wiring, and setup of the meter.

Unpacking

Remove the meter from box. Inspect the packaging and con-

tents for damage. Report damages, if any, to the carrier.

If any part is missing or the meter malfunctions, please contact

your supplier or the factory for assistance.

Panel Mounting

•Prepare a standard 1/8 DIN panel cutout – 3.622" x 1.772" (92 mm

x 45 mm). Refer to Mounting Dimensions, page 32 for more details.

•Clearance: allow at least 4" (102 mm) behind the panel for wiring.

•Panel thickness: 0.04" - 0.25" (1.0 mm - 6.4 mm).

Minimum steel/stainless steel panel thickness to maintain watertight

rating: 0.06" (1.5 mm).

Note: A steel or stainless steel panel rather than plastic is

recommended in cases where a watertight or dust-tight seal is

required between the meter and the panel.

•Remove the two mounting brackets provided with the meter (back-off

the two screws so that there is ¼" (6.4 mm) or less through the

bracket. Slide the bracket toward the front of the case and remove).

•Insert meter into the panel cutout.

•Install mounting brackets and tighten the screws against the panel.

To achieve a proper seal, tighten the mounting bracket screws

evenly until meter is snug to the panel along its short side. DO NOT

OVER TIGHTEN, as the rear of the panel may be damaged.

Figure 1. Panel Cutout and Mounting

Panel

Gasket

Mounting

Bracket

Mounting

Screw

Removable

Connector

3.622" (92mm)

1.772"

(45mm) Panel Cutout

to DIN 43700

Square Corners to 0.060"

(1.5mm) Max Radius

Tolerances:

A: +0.032 (+0.8mm)

-0.000 (-0.0mm)

B: +0.024 (+0.6mm)

-0.000 (-0.0mm)

See page 32 for Mount-

ing Dimensions

PD683 & PD688 Loop-Powered Meters Instruction Manual

Wiring Connections

Signal connections are made to a four-terminal removable connector. This

section is only intended for the PD683.

PD688 installation must be performed in accordance with Control

Drawing LIM688-2 in order to meet agency approval ratings.

Observe all safety regulations. Electrical wiring

should be performed in accordance with all agency

requirements and applicable national, state, and lo-

cal codes to prevent damage to the meter and en-

sure personnel safety.

Figure 2. PD683 & PD688 Rear View

S+ S- B+ B-

Andere Handbücher für Loop Leader PD683

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere PRECISION DIGITAL Messgerät Handbücher

PRECISION DIGITAL

PRECISION DIGITAL Helios PD2-6400 Bedienungsanleitung

PRECISION DIGITAL

PRECISION DIGITAL ProtEX-MAX PD8-6060 Bedienungsanleitung

PRECISION DIGITAL

PRECISION DIGITAL Loop Leader PD683 Bedienungsanleitung

PRECISION DIGITAL

PRECISION DIGITAL Helios PD2-6200 Bedienungsanleitung

PRECISION DIGITAL

PRECISION DIGITAL Helios PD2-6100 Bedienungsanleitung

PRECISION DIGITAL

PRECISION DIGITAL Helios PD2-6060 Bedienungsanleitung

PRECISION DIGITAL

PRECISION DIGITAL pd663 Bedienungsanleitung

PRECISION DIGITAL

PRECISION DIGITAL Sabre Series Bedienungsanleitung

PRECISION DIGITAL

PRECISION DIGITAL PD686 Bedienungsanleitung

PRECISION DIGITAL

PRECISION DIGITAL pd6300 Bedienungsanleitung

PRECISION DIGITAL

PRECISION DIGITAL Loop Leader PD683 Bedienungsanleitung

PRECISION DIGITAL

PRECISION DIGITAL Sabre Series Bedienungsanleitung

PRECISION DIGITAL

PRECISION DIGITAL Loop Leader PD689 Bedienungsanleitung

PRECISION DIGITAL

PRECISION DIGITAL PD6060 Bedienungsanleitung

PRECISION DIGITAL

PRECISION DIGITAL PROVU PD6001 Bedienungsanleitung

PRECISION DIGITAL

PRECISION DIGITAL ProtEX-MAX PD8-7000 Bedienungsanleitung

PRECISION DIGITAL

PRECISION DIGITAL vantageview Safe Touch PD6700-0L1 Bedienungsanleitung

PRECISION DIGITAL

PRECISION DIGITAL PD685 Bedienungsanleitung

PRECISION DIGITAL

PRECISION DIGITAL ProtEX-MAX PD8-6001 Series Bedienungsanleitung

PRECISION DIGITAL

PRECISION DIGITAL Trident PD765 Bedienungsanleitung

PRECISION DIGITAL

PRECISION DIGITAL SABRE T PD743 Bedienungsanleitung

PRECISION DIGITAL

PRECISION DIGITAL ProVu Series Bedienungsanleitung

PRECISION DIGITAL

PRECISION DIGITAL Helios PD2-6200 Bedienungsanleitung

PRECISION DIGITAL

PRECISION DIGITAL PD655 Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

ELMETRON

ELMETRON CP-511 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

EXFO

EXFO FTB-2 Bedienungs- und Wartungshandbuch

Keysight

Keysight M8290A Bedienungsanleitung

ADTEK

ADTEK MW-5 Bedienungsanleitung