PRESONUS FIREPOD Betriebsanleitung

PreSonus Audio | T. 225-216-7887 | www.presonus.com

How to use up to three FIREPOD’s with Windows XP

You can use up to three Firepods on the same system over a single Firewire connection. In order to use multiple Firepods

together you must first download and install the latest driver, and run the firmware updater included with that driver for

each Firepod. Once the drivers and firmware are up to date, using multiple Firepod’s is easy.

Control Panel:

The control panel includes drop down menus to select

samplerate, latency, and clock source, as well as an Active

Units Panel.

Which Unit is Which?:

To determine which position each Firepod is in, you will

need to switch the clock source to SPDIF 1, SPDIF 2, or

SPDIF 3 and look at the Firepods to see which one has a

sync light that is flashing red/blue, indicating that it is

searching for SPDIF sync (make sure no SPDIF

connections are made yet). The number behind each

SPDIF selection refers to the position of the unit in the

Active Units Panel. The position of each unit will

determine which set of inputs/outputs the unit provides in

your DAW software (ex; position #1 = inputs/outputs 1-

10).

Active Units Panel::

The Active Units Panel can be used to change the name of the units for easy recognition (click on the unit you wish to

rename, and click on ‘Edit name’), and to change the order in which the units will appear in your software. For instance,

if you have one Firepod in a rack above another one and you would like it to appear first in the chain (inputs/outputs 1-

10 in your DAW software), you can move it to position #1 in the Active Units Panel if it is not already there. To change

the position of any Firepod, click on it in the Active Units Panel and click on ‘Up’ or ‘Down’.

Add a Third Firepod anytime:

If you already have two Firepods, you can very easily add another to your system. Just chain the new Firepod to the open

Firewire port on your existing Firepod and turn it on. The new driver will automatically install the new unit, and will

guide you through a single install screen. Once the new Firepod is installed, disconnect all Firepods except for the

newest Firepod, wait until you see a blue sync light, and then run the Firmware updater from the Programs list (PreSonus

1394 Audio Driver V.2.14.0 (Firepod)/Firmware Updater). When the firmware updater is finished, reconnect all

Firepods and turn them on. Once all are in sync, you should see them listed in the Active Units Panel in the Control

Panel, as well as in your DAW software.

Note:

- Multi-FIrepod operation is limited to sample rates of 24-bit/44.1k or 24-bit/48k.

- SPDIF is disabled in any multi-FIREPOD system

Andere Handbücher für FIREPOD

Inhaltsverzeichnis

Andere PRESONUS Aufnahmegeräte Handbücher

PRESONUS

PRESONUS BLUEMAX - Bedienungsanleitung

PRESONUS

PRESONUS DigiMax FS Bedienungsanleitung

PRESONUS

PRESONUS FIRESTUDIO LIGHTPIPE - V2.0 Leitfaden

PRESONUS

PRESONUS FIRESTUDIO MOBILE - SCHEMA Bedienungsanleitung

PRESONUS

PRESONUS AudioBox Stereo Bedienungsanleitung

PRESONUS

PRESONUS Studio 1824c Bedienungsanleitung

PRESONUS

PRESONUS Firestudio Project Kurzanleitung

PRESONUS

PRESONUS AudioBox Stereo Bedienungsanleitung

PRESONUS

PRESONUS AudioBox Stereo Bedienungsanleitung

PRESONUS

PRESONUS AUDIOBOX USB - V 2.0 Bedienungsanleitung

PRESONUS

PRESONUS VXP - Bedienungsanleitung

PRESONUS

PRESONUS AudioBox Stereo Bedienungsanleitung

PRESONUS

PRESONUS Revelator io24 Bedienungsanleitung

PRESONUS

PRESONUS NSB Series Bedienungsanleitung

PRESONUS

PRESONUS FIREPOD Bedienungsanleitung

PRESONUS

PRESONUS CL 44 Bedienungsanleitung

PRESONUS

PRESONUS 1BOX - Bedienungsanleitung

PRESONUS

PRESONUS Quantum series Bedienungsanleitung

PRESONUS

PRESONUS HP60 - DIAGRAM Bedienungsanleitung

PRESONUS

PRESONUS Quantum 2626 Bedienungsanleitung

PRESONUS

PRESONUS AudioBox 1818VSL Bedienungsanleitung

PRESONUS

PRESONUS AudioBox GO Bedienungsanleitung

PRESONUS

PRESONUS AudioBox 22VSL Bedienungsanleitung

PRESONUS

PRESONUS Central Station Plus Bedienungsanleitung

Beliebte Aufnahmegeräte Handbücher anderer Marken

KV2 Audio

KV2 Audio 500 Series Bedienungsanleitung

Robotics Technologies

Robotics Technologies microBus-Cam II Bedienungsanleitung

Seca

Seca 460 Bedienungsanleitung

Cognex

Cognex MVS-8000 Series Bedienungsanleitung

Mect

Mect MPNC006 Series Bedienungsanleitung

Bad Caf

Bad Caf THE LEASH Bedienungsanleitung

Strymon

Strymon NIGHTSKY Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric 16CH DIGITAL RECORDER DX-TL5000U Bedienungsanleitung

Tews Technologies

Tews Technologies TPMC465 Bedienungsanleitung

Honeywell

Honeywell Excel 50 Bedienungsanleitung

SeaLevel

SeaLevel COMM+8.LPCI Bedienungsanleitung

Arturia

Arturia AUDIOFUSE STUDIO Bedienungsanleitung

Rukra

Rukra RK-1240 Bedienungsanleitung

Samson

Samson SCOM Bedienungsanleitung

Dynacord

Dynacord DPS260 Bedienungsanleitung

Nice

Nice Core Bedienungsanleitung

Pyle Pro

Pyle Pro PSS8 Bedienungsanleitung

RF-System

RF-System TinyGate Gebrauchs- und Pflegehandbuch