Pro-Form Crosswalk 397 Bedienungsanleitung

397

Model No. 831.24843.0

Serial No,

Write 1he serial number in the space

above for reterence,

Decal

•Assembly

• Operation

• Maintenance

.Part List and Drawing

Sears, Roebuok and Co.

Hoffman Estates, ]L 60179

TREADMILL EXERCISER

User's Manual

TABLE OF CONTENTS

WARNING DECAL PLACEMENT ............................................................... 2

IMPORTANT PRECAUTIONS .................................................................. 3

BEFORE YOU BEGIN ........................................................................ 5

PART IDENTIFICATION CHART, ............................................................... 6

ASSEMBLY ................................................................................ 7

OPERATION AND ADJUSTMENT ................................. _ ........................... t3

HOW TO FOLD AND MOVE THE TREADMILL ................................................... I9

TROUBLESHOOTING ........ .............................................................. 20

EXERCISE GUIDELINES .................................................................... 23

PART LIST ................................................................................ 24

EXPLODED DRAWING ...................................................................... 25

ORDERING REPLACEMENT PARTS_ .................................................. Back Cover

90-DAY FULL WARRANTY ........................................................... Back Cover

WARNING DECAL PLACEMENT

This drawing shows the location[s)

of the warning decal(s), if adecal is

missing or illegible, call 1-888,-533-

1333 and request a free replacement

decal, Apply the decal in the location

shown. Note: The decal(s) may not be

shown at actual size.

KEEPHANDSANDFEE-I'AWAY

FROMTHISAREAWHILETHE

TREADMILLISINOPERATION.

IMPORTANT PRECAUTIONS

BEFORE YOU BEGIN

Thank you for seleCting the new PROFORM e

CROSSWALK 397 treadmill, The CROSSWALK 397

treadmill provides an impressive selection of features

designed to make your workoutS at home more effec-

tive and enjoyable,

For your benefit, read this manual carefullybefore you

use the treadmill. If you have questions afterreading

this manuaJ,p[easesee the back coverofthis manual.

To helpus assistyou, note the productmodel number

and sedal number before contactingus.The model

numberand the location of the serial numberdecal are

shownon the front coverof this manual.

Before reading further, please familiarize yourselfwith

the parts that are labeled inthe drawingbelow,

I Length: 5ft, 5in,(165cm) i

Width: 2 ft. 9 in. (84 em)

Storag_

Crosswalk

Walking Belt

Foot Rail

,Console

Monitor

KeylCtip

Hood

Idler Roller

Adjustment Screws.

Wheel

Platform Cushion

PART IDENTIFICATION CHART

Use the drawings below to identify small parts used for assembly. The number in parentheses below each draw-

ing is the key number of the part, tram the PART LIST near the end of this manual, The number following 1he key

number isthe quantity used for assembly. Note: If a part is not in the hardware kit, check to see if it is preat-

tached, If it is not, carl 1-888-533_1,333. Extra hardware may be included,

I/4" Star Washer

(23)--4 3/8" Star #8 x 1/2" Ground #8 x 3/4" Screw

Washer (3)-t0 Screw (1)-1 (4)-4

#8 x 1" Screw 1/4" x 3 1/2" Screw (56)--4

(7)-4

!iii iii!ii :\iiii

#10 x t 1t2"Ssrew

(8)-2

3,."8"x31/4" Screw (2)-6 D

ASSEMBLY

• Assembly requires two persons.

• Place all parts in a cleared area and remove the

packing materials. Do not dispose of the packing

materials until you finish assembly.

• The underside of the walking belt is coated with

high-pedormance lubricant. After shipping, there

may be some lubricant on fop of the walking belt

or on the shipping carton. This is normal. If there

is lubricant on top of the walking belt, wipe it oN

with asoft cloth and a mild, non-abrasive cleaner.

•To identify small paris, see page 6.

• Assembly requires the following tools:

the included hex keys |

one Phillips screwdriver

scissors 8=_

• To avoid damaging parts, do net use power tools,

1. Make sure that the power cord is unplugged.

Remove and discardthetwo screws(A) and the

shipping bracket (B) from the r_ghtside ofthe

Base (74). 3"hen,remove and discard the screws

and shipping bracket (not shown)from the left

side of the Base.

2. With the help of a second person, tip the tread-

mill onto its left side. PaPally pivot the Base (74)

to help stabUze the treadmill.

Pull the Upright Wire (63) and the ground wire

through the indicated hole in the Base (74).

Attach the groundwire te the Base (74) witha#8

x1/2" Ground Screw (1).

See the inset drawing, Cut the plastic tie near

the Upright Wire (63). Be careful not to dam-

age the Upright Wire,

2 63

3.PressaBaseCap(70)intotheBase(74).

MakesurethattheUprightGrommet(73)is

pressedinlothesquareholeintheBase(74). 7O

4.Identifythe Right UPright (76), which is marked

"Right. ° Have a second person hold the Right

Upright near lhe Base (74).

See the inset drawing. Tie the wire tie in the

Right Upright (76) securely around the end of

the Upright Wire (63). Then, insert the Upright

Wire into the lower end of the Right Upright as

you pull the other end of the wire tie through the

Right Upright,

Hold the Right Upright (76) against the Base

(74). Be careful not to pinch the wires,

Partially tighten three 3/8" x 31/4" Screws (2)

with three 3t8" Star Washers (3) into the Right

Upright and the Base; do not fully tighten the

Screws yet.

With the help of a second person, tip the

treadmill onto its right side. Press in a Base

Cap (not shown) and attach the Left Upright

(not shown) as described in steps 3 and 5,

Note: There are no wires on the left side.

6, Identify the Left and Right Handrails (59, 64),

which are marked "Left" and URight." Remove the

four 5f16" x3/4" Screws (5) and four 5/16" Star

Washers (6) from the bottoms and sides of each

Handrail,

Hold the Right Handrail (64) near the Right

Upright (76). Insert the wire tie on the Upright

Wire {63) through the hole in the bottom and

out of the hole in the side of the Left Handrail as

shown. Then, pull the Upright Wire through the

Right Handrail.

Attach the Right Handrail (64) to the Right

Upright (76) with fwo of the 5/16" x 3f4" Screws

(5) and two of the 3/8" Star Washers (6) that

you just removed. Make sure not to pinch the

Upright Wire (63), Start both Screws, and

then tighten them.

Attach the Left Handrail (59) to the Left Upright

(66) as described above. Note: There are no

wires on the left side,

7. Position the Conso[e Crossbar (61) between

the Left and Right Handrails {59, 64) with

the Console Ground Wire (47) pos{tioned as

shown.

Attach the Console Crossbar (61) to the Left

and Right Handrails (59, 64} with the other four

5/16" x 3;4" Screws (5) and the other four 5/16"

Star Washers (6) that y_u removed in step 6.

Start all four Screws, and then tighten them.

8. With the help ofa second person,hold the con*

soIe assembly nearthe Right Handrail (64).

Connect the Upright Wire {63} to the console

wire, See the inset drawing. The connectors

should slide together easily and snap into

-place. If they do not, turn one connector and try

again, IF YOU DO NOT CONNECT THE CON-

NECTORS PROPERLY_ THE CONSOLE MAY

BECOME DAMAGED WHEN YOU TURN ON

THE POWER, Then, remove the wire tie from

the Upright Wire.

Connect the Console Ground Wire (47} on the

Console Crossbar (6l) to the grQund wire on the

console.

8 Console

Assembly,-.

Andere Handbücher für crosswalk 397

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Pro-Form Tretmühle Handbücher

Pro-Form

Pro-Form XP 542s 831.295050 Bedienungsanleitung

Pro-Form

Pro-Form 600 Zlt Treadmill Bedienungsanleitung

Pro-Form

Pro-Form PFTL78807.1 Bedienungsanleitung

Pro-Form

Pro-Form 790tr Treadmill Bedienungsanleitung

Pro-Form

Pro-Form 590 Rt Treadmill Bedienungsanleitung

Pro-Form

Pro-Form 1030 Stx Bedienungsanleitung

Pro-Form

Pro-Form XP 100 U Bedienungsanleitung

Pro-Form

Pro-Form 790tr Treadmill Kurzanleitung

Pro-Form

Pro-Form Carbon TL PFTL59720-INT.0 Bedienungsanleitung

Pro-Form

Pro-Form PREMIER 1300 PETL15816.0 Bedienungsanleitung

Pro-Form

Pro-Form 590 HR PETL55132 Bedienungsanleitung

Pro-Form

Pro-Form Power 690 Bedienungsanleitung

Pro-Form

Pro-Form 831.297690 Bedienungsanleitung

Pro-Form

Pro-Form PFTL39706 Bedienungsanleitung

Pro-Form

Pro-Form 600 Zlt Treadmill Bedienungsanleitung

Pro-Form

Pro-Form CrossWalk Fit 416 Bedienungsanleitung

Pro-Form

Pro-Form 500 CST Bedienungsanleitung

Pro-Form

Pro-Form 6.75q Bedienungsanleitung

Pro-Form

Pro-Form 400 C Treadmill Bedienungs- und Wartungshandbuch

Pro-Form

Pro-Form 831.299520 Bedienungsanleitung

Pro-Form

Pro-Form PCTL59100 Bedienungsanleitung

Pro-Form

Pro-Form 790cd Treadmill Benutzerhandbuch

Pro-Form

Pro-Form TRAINER 9.0 PFTL69921.0 Bedienungsanleitung

Pro-Form

Pro-Form 365p Treadmill Bedienungsanleitung

Beliebte Tretmühle Handbücher anderer Marken

Treadly

Treadly TREADLY 2 Bedienungsanleitung

HEALTH ONE

HEALTH ONE Walk Ro Bedienungsanleitung

NordicTrack

NordicTrack NTL12941 Bedienungsanleitung

NordicTrack

NordicTrack T7.5 S Bedienungsanleitung

Gold's Gym

Gold's Gym ADVANTAGE GGTL12920 Bedienungsanleitung

Merax

Merax MS282992 Bedienungsanleitung

FYTTER

FYTTER RU-2SX Bedienungsanleitung

Precor

Precor 903 Bedienungsanleitung

FitLogic

FitLogic freewill d225 Bedienungsanleitung

HOP-SPORT

HOP-SPORT ESTIMA HS-3200LB Bedienungsanleitung

Horizon Fitness

Horizon Fitness Adventure 5 Plus Bedienungsanleitung

Stamia

Stamia InMotion II Bedienungsanleitung

Smooth Fitness

Smooth Fitness EVO 3i Bedienungsanleitung

NordicTrack

NordicTrack NETL81810.0 Bedienungsanleitung

Schwinn

Schwinn 830/Journey 8.0 Bedienungsanleitung

Keys Fitness

Keys Fitness HealthTrainer HT-740T Bedienungsanleitung

Spirit

Spirit XT8 Bedienungsanleitung

NordicTrack

NordicTrack T 14.0 Treadmill Bedienungsanleitung

Pro-Form crosswalk 397 Bedienungsanleitung

Beliebte Tretmühle Handbücher anderer Marken