Pro-Ject Audio Systems Remote Box S2 Bedienungsanleitung

BOX•DESIGN

PRO-JECT

AUDIO

SYSTEMS

INSTRUCTIONS

FOR

USE

Pro-Ject

Dear music lover,

thank you

for

purchasing a Pro-Ject

Audio

Systems

ompl1f1er

order

achieve maximum performance and reliability you should study these instructions

for

use carefully.

Warning

o hazard

for

the user, the unit

possible misuse.

Important

notice.

Safety instructions

outlet voltages vo,y from count,y

count,y. Before connecting to the mains, make sure that the

voltage

your oreo meets the voltage requirements print

the

power

supply.

The

powersupply

used

connect/disconnectthe

unit

from the mains. Make sure that

the

power

supply

easily

accessible

all

times.

Never

handle

the

device, the powersupply while your hands ore wet

damp. Avoid letting

liquids

enter the device

the

power

supply.

Never

place ony item containing

liquid,

such

os o flower vase

near

the device.

Never

spill

any

liquid

the device or the

power

supply. Neverplace any naked

flame

sources,

such

lighted

candles on

nearthe device.

The

product

shall

not be used

damp or wet locations, next

bathtub,

sink,

swimming

pool

or ony other

similar

conditions.

Connectors

MoiAS2

Make

all

connections except the connection

the headphone and

USB

whilst

the un,t

disconnected from the mains.

2.Neverconnect

disconnect powersupply to or

from

the

unit

whilst

the power supply

connected to

the

mains

/Never use any other power supply

than

the

one

supplied

with

the

unit

with

the exception

dedicated Power

Boxes

which

con replace original powersupplies.

Toke

core

connect the left and

right

channels

ln2

ln3

correctly.

The

right

channel

usually

marked

red,

the leftchannel black or

white.

Maia

only:

Speakerconnections

for

the left speaker ore located on

the

right

hand side

rear

view

above, connections

right

speakerore localed

near

the

power

socket. Speaker connectors marked red

represent +according

indicators

speaker

terminal

Line output

power

amplifier

active loudspeakers con

connected

output sockets marked

Output

Connection to

the

speakers

The output terminals accept loudspeaker cables terminated with

4mm

0 Banana plugs, spades connectors

naked wire.

2 © Pro-Jed Audio Systems · Pro-Jed

MaiA

S2 ·

Rev

isi

2019

Phono input

Connect the toneorm signal lead to the

Phono

the amplifier The eorthing wire may be connected

the

screw terminal

you encounter hum problems when using the turntable.

Line inputs

Line level sources such as

player, radio

can be connected

the input sockets marked

ln3

ln-4

Digital inputs

Sources with a digital output such

satellite/cable receiver

a game console can be connected to the

digital input

Coaxial to

5 and optical

6 and

Connecting to a

Computer

Connect the USB-input

USB

the

MaiA

(unit must be switched on) to a free USS-socket

your

computer and tum

on/make

is powered

. Select input

8USB

Windows 10 and

Mac

* operating

systems

not need

additional driver

setup.

Linux operating

systems

include an

USB

Audio

ass

2 driver from Linux Kernel

2.6

and higher.

Please note: Connection should

made

USB-socket

of your computer

directly.

Connecting

USB-hubs

switches con cause problems.

24Bit/192kHz

playback with Windows® operating systems

• For older Windows* operating

systems

24Bit/l

92kHzUSB driver (supplied on CD) has

be installed.

Insert the included

into the drive of you

and follow the instructions.

Mt«

Installing

the

driver,

some

settings

have

checbd/

done.

For example -Windows 7

operating

system:

➔

Control

Panel

➔

Hardware and Sound

➔

Sound

➔

Playback:

select

Spealcer

MaiA

USB

2.0

Audio

Out

➔

Properties

➔

Supported formats:

make

sure

nothing

assigned

➔

Level

➔

Sound: setting must be

100

➔

hancements:

disable

all

enhancements

➔

Advanced ➔ Default Format:

set

studio

quality

2-4/192

Mains

power

connection

Connect the l

voltage pl

from the power supply

the

Power

socket before connecting the power supply

to the mains.

Front

panel

controls

O • •

MaiA

S2 · Revision

2019

To switch

from standby

tandby

The push button

the left side

the front ponel turns the unit

bock into stondby. The blue

LED

above

the stond-by push button shows that the unit

switched on. Mute is acti

when

LED

blinking.

Input

selector

After the unit

powered on, pressing the

buttons

◄

and

►

the

LEDs

inputs indicators selects

desired input.

Volume

Adjust the volume to the desired level, using the large knob on the front panel.

Con

necting a

headphone

Connect the headphones to the ¼" (6,3mm

jock socket

the front

the unit.

Bluetooth connection

Make

sure the antenna

attached to its connector

on the bock panel prior using Bluet

Use

only

supplied

anfenna

Bluetooth is active only when input 9

selected.

LED

Bluetooth input

blinking slowly when

device

connected.

the

LED

on,

active connection with Bluetooth device

established.

Pairing

with

Android

devices

Open

Settings

and top

Bluetooth.

Turn on Bluetooth and lop on

Scan

. Searched devices will show up.

Tap

Ma1A

52"

and confirm presented pairing code

your Android device. Then press

►

(po

i~ button

MoiA

(alternatively

CH+

VOL+ button

remote control) when the blue

LED

input9 starts blinking

fast. When paired with MoiA, yourAndroid device will show

'Co

nnected

media Audio

Now

you con ploy

music

from

yourAndroid device over Bluetooth to

MoiA

S2.

A\ Older devices may request a

pairing

code. Enter

000

' and confirm. No more confirmation on

MoiA

then needed.

Bluetooth

ring

with

Apple

deYices

Top

Settings

, top

Bluetooth

, turn

Bluetooth. Your device will automatically start searching for

ovoiloble devices. Top on '

MaiA"

and confirm by pressing

►

(pal~

button

MoiA(olternatively

VOL+ button

remote control) when the blue

LED

input 9

blinking.

Bluetooth

pairing

with

Windows

smartphone1

Open

Settings

and tap on

Bluetooth.

Turn on Bluetooth and a scan

for

available devices starts automatically.

Searched devices will show up. Top on

'MaiA

S2'

and confirm presented pairing code

your Windows

device. Then

press

►

(poi~

button

MoiA

(alternatively

CH+

VOL

+ button on remote control) when

the blue

LED

input 9 starts blinking fast. When paired with MoiA, yourWindows device will show

'Connected

media Audio'.

Now

you con ploy music from your Windows device over Bluetooth

MoiA

S2. MoiA S2 con store

to 8 Bluetooth devices.

the memory

full,

newconnections

will

outomoticolly

rep/ace the oldestconnection. A new connection

only possible

the

LED

input

blinking

• slowly

(it

indicates thot

device

connected).

4 © Pro-Jed Audio Systems · Pro-Jed

MaiA

S2 · Revision

2019.03.26

Remote control

Replacing batteries

Proceed as follows:

•

turns

the

unit

bock

into

standby (l

ong

press),

mute

(short)

(

VOL-

) (VOL~

'-..__,./

and

J adjust the sound

ume

8 ~

·--...

CH+

\...

and _

'.:)select

the inputs

VOL+

and

CH+

confirm

Bluetooth

pairing

VOL-

and

CH-

cance

l Bluetooth pairing

•

ock

and

slide

open

the battery case

cover

• Replace the battery.

Make

sure

the

battery

the right way

round

• Close the battery case

cover

Battery type: l x

CR2032

l x

CR2025

not

dispose the batteries as ordinary domestic refuse. Please dispose your exhausted batteries at

the appropriate collection sites -usually located at supermarkets

and

drugstores_

Technical specifications Pro-Ject

MaiA

Power

output

Frequency response :

Channel

separation :

Noise

oor:

Goin

Line level

inputs

Line

input

sensitivity :

Line

input

impedance

Phonoinpul:

Phono

input

sensitivity :

Phono

input

impedance

Phono

input

gain

S/PDIF coaxial

input

S/PDIF

optical

input

USB

input:

USB

ta transfer :

Digital

Analogue

converter :

Variable

ine

level

output

Bluetooth version:

Bluetooth music receiver

codec

Bluetooth

maximum

power

Speakers connectors:

Headphone

output

25W/38W

ohms/4

ohms (5%THD)

20Hz

20kHz

-0,7dB,

-0,SdB (@8ohms)

65dB

20kHz

-90dB

(A weighted)

0,07%

33dB

(measured via l

ine

level input)

pair

RCA + l jack

3.5mm

350mV

S0kohms

pair

RCA

suitable

for

MM,

high

output

cartridges

47kohms

46dB

24bit

and

92kHz

24bit

and

96kHz

USB

Audio

Closs 2 requires

USB

2.0

higher

computer

Asynchronous

Cirrus L

ogic

CS4344

24bit/l

92kHz

Multi-bit

Delta

Sigma type

jock

3.5mm

2.1

+EDR

optX,

A2DP

profile

+4dBm

4mm

banana

plugs, spades connectors

naked wire

6,3mm

jock

(16

600ohms)

Jed

Audio Systems · Pro-Jed MoiA S2 · Revision

19.

03.26

Outboard

power supply.

20V/3A

DC, suitable

for

your country's mains supply

Power consumption : max.

DC,

<0.5W

in standby

Replacement battery remote control : 1 x CR2032 / 3V

1 x CR2025 /

Dimensions W x H x D

with sockets) :

206

165

(176)mm

Weight :

925

g without power supply

Should you encounter a problem which you ore not able to alleviate

identify, please contact your dealer

for

further advice.

Only

the problem cannot be resolved there, the unit should

sent

the responsible

distributor

your country.

Warranty

The manufacturer accepts no responsibility for damage caused by not adhering to these instructions

for use. Modification

changes

any part

the product by unauthorized persons re/ease the

manufacturer from any

liability

overand above the lawful

rights

the customer.

Pro-Jed Audio

Systems

o registered Trademark

H. Lichtenegger.

This guide was produced

by:

Pro-Jed Audio

Systems

The information was correct at the time

going to

press. The monufocturer reserves the right

make

changes

the technical specification without prior

notice

deemed necessary to uphold the ongoing

process

technical development.

Bluetooth® is a trademark owned by the Bluetooth SIG, Inc., , Microsoft®, Windows®, are either registered

trademarks

Microsoft Corporation, Apple is registered trademark

Apple Inc., Android""

a trademark

Google

Inc.

Waste from Electrical

and

Electronic Equipment

(WEEE}:

This

directive mandates the collection and recycling

electronics

and

component materials in order

reduce the amount going

landfills. Outside North

America, when the user decides to discard this product,

must be sent

a separate collection facility

for

recycling. Please contact your point

purchase for more details.

Federal Communication Commission (FCC) Interference Statement FCC

Port

15: This equipment has been

tested and found to comply

th the limits for a Closs B digital device, pursuant to Part 15

the

FCC

Rules

These limits ore designed

provide reasonable protection against harmful interference in a residential

installation. This equipment generates,

uses

and can radiate radio frequency energy and,

not installed and

used in accordance with the instructions, may cause harmful interference to radio communications. However,

there is

guarantee that interference will not occur in a particular installation.

this equipment does cause

harmful interference

radio

television reception, which con be determined by turning the equipment

off

and on, the user

encouraged to try

correct the interference by one

the following measures:

-Reorient

relocate the receiving antenna

-Increase the separation between the equipment and receiver

-Connect the equipment into

outlet on o circuit different from that

which the receiver

connected

-Consult the dealer

an experienced radio/TV technician for help.

This device complies with port 15

the FCC

Rules.

Operation is subject to the following two conditions:

(1)

This device may not cause harmful interference, and (2) this device must accept any interference received,

including interferencethatmaycause undesired operation. FCC Radiation Exposure Statement: This equipment

complies with FCC radiation exposure limits set forth

for

on uncontrolled environment.

To maintain compliance with FCC's

exposure guidelines, this equipment should be installed and operated

with minimum distance 20cm between the radiator and

your

body.

Use

on the supplied antenna.

Contai

FCC

2ACCRMB05

6 © Pro-

Jec1

Audio Systems· Pro-Jec1 MaiA

· Revision

2019.03

Declaration

Conformity

We, Canor

spol.

sr.o.

Druzstevn6

13925/39

08006

Prefov

Slovakia

(manufacturer)

and

Pro-Jec:t

Audio

Systems

a division

Audio Tuning

GmbH

Margaretenstrasse

050

Vienna,

Austria

(distributor)

declare under our responsibility thatthe product

in conformity with the provisions

Directives:

2014/35/EU

including amendments

2014/30/EU

including amendments

2014/53/EU

including amendments

The following harmonised standards were applied:

Health:

EN62479:2010

Safety: EN60950•l

:2006+Al

:2009+A

1:201

0+A

12:2011

+A2:2013,

EN62368-l

:2014/Al

:2017,

EN6l 558-1 :

2005/A

1:2009,

EN61558-2-16:2009/A

:2013

EMC:

EN301489-l

V2.2.0:

2017-03,

EN301489-l 7

V3.2.0:2017-03,

EN55032:2015,

EN55035:2017,

EN61000-3-2:2014,

EN61000-3-3:2013

Radio Spectrum: EN300328 V2.l

(2016-11)

Pro

Ject

Audio

Systems

a division

Audio Tuning

GmbH

1050

Vienna, Austria, Margaretenstrasse

[email protected]

Sys

ems

· Pro-Ject MoiA S2 ·

Revisi

2019

PRODUCT INFORMATION

Technical data and price changes reserved.

Page 1/2

PRO-JECT AUDIO SYSTEMS

www.project-audio.com

• 2x38 watts @ 4 ohms

• Dual mono design principle

• Inputs: 3x stereo line, 1x phono (RCA), 1x bluetooth (aptX), 2x

digital ptical, 1x digitial coax, 1x USB

• XMOS asynchronous USB

• DAC: Cirrus Logic CS4344 24bit/192kHz Multi-bit Delta Sigma

• 4th generation Bluetooth with aptX capability & antenna

• Phono MM + high output MC input

• Volume control with motor driven potentiometer

• Headphone output

• Variable output for subwoofer or second zone amp

• IR remote included

• Improved ALL-ALUMINIUM case and BOARD LAYOUT im-

prove electromagnetical interference

• New S2 design in high-quality aluminum case, available in

silver or black

Power output: 2x 25W / 38W at 8 / 4 ohms

Signal-to-noise ratio: > 90dB (IEC -D)

Frequency response: 20Hz - 20kHz (+0dB, -0,5dB) (@8

ohm)

Analogue inputs: 2 pair RCA + 1 x 3,5mm line, 1 phono

MM + high output MC (RCA)

Digital inputs: USB, RCA coax, 2 x Toslink, Bluetooth

(aptX)

Speaker connectors: 4mm Ø banana plugs, spades

connectors or naked wire

Headphone output: 6,3mm jack

Variable output: 3,5mm jack

Power supply: 20V/3A DC;100 - 240V, 50/60Hz

Standby Power consumption: < 0,5 watts

Dimensions W x H x D: 206 x 38 x 165 (176mm with

sockets)

Weight: 925 g without power supply

MaiA S2

Stereo integrated amplier with 9 input options

MSRP 499 € (incl. VAT)

colour options:

PRODUCT INFORMATION

Technical data and price changes reserved.

Page 2/2

PRO-JECT AUDIO SYSTEMS

www.project-audio.com

MaiA S2: Compact stereo amplier

with timeless design

& future-proof technology!

Our original MaiA was a compact integrated amplier

with ultimate input exiblity, that avoids compromising

the sound quality. It is oering all digital and analogue

input options you can dream of combined with an

amplier stage, that delivers outstanding tube-like sound

(Flying Mole modules) and a high-class 24bit/192kHz

D/A converter stage. Now it is time to introduce our MaiA

into our S2 product line with modern looks, a new ALL-

ALUMINUM case and improved BOARD LAYOUT. The

astonishing feature-set remains the same as before!

Despite its small size, 9 source devices can be connected

simultaneously:

• High-quality phono MM + high output MC preamp •

3 analogue line level inputs (2x RCA, 1x 3,5mm jack)

• XMOS asynchronous USB 24bit/192kHz input for

computer audio • Digital coax input (up to 24bit/192kHz)

• 2 Toslink inputs (up to 24bit/96kHz) • Wireless Bluetooth

streaming (aptX capable) input with dedicated antenna

The IMPROVED CASE and BOARD LAYOUT result in

better shielding of electromagnetical interference further

improving the already excellent audio performance: No

matter which input you choose, a real musical sound with

lifelike characteristics is guaranteed.

This stylish amplier oers low noise and solid output

power for audiophile playback in smaller rooms around

25m2, when partnered with good-quality speakers

from € 200,00 to € 1000,00. Additionally a subwoofer or

another power amplier can be connected. A headphone

6,3mm connection is also provided. The included remote

control makes usage a piece of a cake.

Andere Handbücher für Remote Box S2

Inhaltsverzeichnis

Andere Pro-Ject Audio Systems Verstärker Handbücher

Pro-Ject Audio Systems

Pro-Ject Audio Systems AMP BOX DS Bedienungsanleitung

Pro-Ject Audio Systems

Pro-Ject Audio Systems Head Box MK II Bedienungsanleitung

Pro-Ject Audio Systems

Pro-Ject Audio Systems Box-Design MaiA S3 Bedienungsanleitung

Pro-Ject Audio Systems

Pro-Ject Audio Systems Pro-Ject Head Box II Bedienungsanleitung

Pro-Ject Audio Systems

Pro-Ject Audio Systems Box SE Bedienungsanleitung

Pro-Ject Audio Systems

Pro-Ject Audio Systems Phono Box II USB Bedienungsanleitung

Pro-Ject Audio Systems

Pro-Ject Audio Systems MaiA Bedienungsanleitung

Pro-Ject Audio Systems

Pro-Ject Audio Systems power box ds Bedienungsanleitung

Pro-Ject Audio Systems

Pro-Ject Audio Systems Phono Box II Bedienungsanleitung

Pro-Ject Audio Systems

Pro-Ject Audio Systems Head Box DS Bedienungsanleitung

Pro-Ject Audio Systems

Pro-Ject Audio Systems Box S USB Bedienungsanleitung

Pro-Ject Audio Systems

Pro-Ject Audio Systems Tube Box SE II Bedienungsanleitung

Pro-Ject Audio Systems

Pro-Ject Audio Systems Head Box DS Bedienungsanleitung

Pro-Ject Audio Systems

Pro-Ject Audio Systems Pre Box DS2 Analogue Bedienungsanleitung

Pro-Ject Audio Systems

Pro-Ject Audio Systems Pre Box S Bedienungsanleitung

Pro-Ject Audio Systems

Pro-Ject Audio Systems Phono Box USB Bedienungsanleitung

Pro-Ject Audio Systems

Pro-Ject Audio Systems Pro-Ject Audio Systems Bedienungsanleitung

Pro-Ject Audio Systems

Pro-Ject Audio Systems Phono Box SE II Bedienungsanleitung

Pro-Ject Audio Systems

Pro-Ject Audio Systems Phono Box Bedienungsanleitung

Pro-Ject Audio Systems

Pro-Ject Audio Systems Tube Box DS Bedienungsanleitung

Pro-Ject Audio Systems

Pro-Ject Audio Systems Stereo Box S Phono Bedienungsanleitung

Pro-Ject Audio Systems

Pro-Ject Audio Systems Tube Box DS2 Bedienungsanleitung

Pro-Ject Audio Systems

Pro-Ject Audio Systems Pro-Ject Head Box S Bedienungsanleitung

Pro-Ject Audio Systems

Pro-Ject Audio Systems Phono Box DS Bedienungsanleitung

Beliebte Verstärker Handbücher anderer Marken

ASTRO

ASTRO HVO V40 P Bedienungsanleitung

Marantz

Marantz SUPERSCOPE BLA-545 Montageanleitung

NAD

NAD CI980 Bedienungsanleitung

Technics

Technics SE-CH770 Bedienungsanleitung

Harman Kardon

Harman Kardon HK6300 Bedienungsanleitung

NAD

NAD T975 Bedienungsanleitung

McIntosh

McIntosh MA6850 Bedienungsanleitung

Electro-Harmonix

Electro-Harmonix ENGLISH MUFF’N Bedienungsanleitung

Viatron

Viatron Autrix Bedienungsanleitung

GME

GME GA9800 Bedienungsanleitung

Atlas

Atlas CP700 Bedienungsanleitung

Roland

Roland KC-1000 Bedienungsanleitung

Pyle

Pyle PFMRA350BW Bedienungsanleitung

Advantage

Advantage S-250 Bedienungsanleitung

IRT Electronics

IRT Electronics DVA-3007 Bedienungsanleitung

Dimavery

Dimavery BA-100 Series Bedienungsanleitung

Sony

Sony XM-S400D Bedienungsanleitung

Schertler

Schertler ROY X Bedienungsanleitung