PRO SIGNAL PSG3083 Bedienungsanleitung

HDMI OVER Cat6/6a/7 EXTENDER

PSG3083

The terms HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are

trademarks or registered trademarks of HDMI Licensing Administrator, Inc.

WHAT’s IN THE BOX

OVERVIEW

IMPORTANT SAFETY INFORMATION

INSTALLATION

• HDMI extender using HDBaseT, transmits HD audio and video signal, with infrared

remote control for added convenience.

• Ultra HD video and audio transmission range via Cat6 of up to 100 meters.

• Extends 1080p video transmission up to 100 meters.

Please read these instructions carefully before use and retain for future reference.

Requirements

• An HDMI source device with HDMI OUTPUT interface, DVD, PS3, STB, PC etc.

• A display device with HDMI INPUT port, SDTV, HDTV, projector etc.

• Network cables UTP/STP Cat5e/Cat6/Cat6A/Cat7 network cables, to IEEE-568B.

• When using electrical appliances basic safety precautions should always be followed.

• Check that the voltage indicated on the rating plate corresponds with that of the local

network before connecting the power supply to the mains power supply.

• Do not expose the units to moisture or dust and keep any ventilation slots clear.

• Do not connect or disconnect cables while powered on and in use.

• HDMI 1.3 compatible uncompressed HDMI video signal.

• Apply HDBaseT extend technology.

• Supports ultra HD 4kx2k@60Hz and1080p signal over Cat6 up to 100 meters.

• Support HDCP, CEC, 24 bit deep colour 3D.

• Support uncompressed LPCM audio and compressed DTS-HD, Dolby True HD.

• Support use of source device remote control when viewing from an out of sight

location.

• IR remote function can be used in either direction by switching the IR receiver and

transmitters over depending on required location of the controlling remote control.

• Automatically identifies and configures a variety of display modes.

• Features RS232 serial bi-direction passback function.

FEATURES

• HDMI Transmitter

• HDMI Receiver

• 12V DC PSU x 2 off

• IR-TX Transmitter

• IR-RX Receiver

• RS232 serial port caps x2 off

• User Manual

Connections

• Connect the signal source equipment to the input port of the transmitter using a

quality HDMI cable.

• Plug the IR-TX extender into the IR-IN port of the transmitter. Direct the extender

head towards the remote control sensor on the source device.

• Connect an HDTV to the receiver output port using a quality HDMI cable.

• Plug the IR-RX extender into the IR-IN port of the receiver. Direct the sender head

such that it can receive signals from the remote control for your source device.

• Connect one PSU to the receiver 12V DC socket and connect to the mains supply.

• Connect the second PSU to the transmitter 12V DC socket and connect to the mains

supply.

• Power on the signal source and the display.

1. DC12V: Power input.

2. LED status

1 - Power on indicator.

2 - TX/RX connection established.

3 - Indicates signal is being transmitted.

3. HDBT IN: HDBaseT Network connection.

4. HDMI IN and OUT: HDMI signal connection to source and output devices.

5. IR IN: IR signal input to connect with IR receiver extension cable.

6. IR OUT: IR signal output to connect with IR sender extension cable.

Transmitter Panel Connections

Receiver Panel Connections

MAINTENANCE

• Clean the outside casing with a soft cloth lightly moistened with mild soap and water.

Never use any abrasive or solvents.

• Do not allow moisture to enter the casing.

SPECIFICATIONS

RS232 SERIAL BI-DIRECTION PASSBACK FUNCTION.

Parameter Description

Video

Standards HDMI 2.0, HDCP 2.2, CEC 24bit deep colour

Resolution supported

480i@60Hz, 480p@60Hz, 576i@50Hz,

576p@50Hz, 720p@60Hz, 1080i @60Hz.

1080p@60Hz,3D, 4KX2K@60Hz

Audio Standards LPCM ,DTS-HD, Dolby True HD

Network Standard Cat6, Cat6A, Cat7, supports PoE

Transmission length 100m: UP to 1080p@60Hz 48bpp,

1080p@60Hz 3D,4Kx2K@60 Hz

IR Support 20~60kHz

wide frequency devices Bi-directional IR transmission

Environment

Working temp 0~55oC @ 0~90% humidity

Storage temp -10~70oC

Power Voltage 12V DC @ 2A

Power consumption TX: 6W RX: 8W

Weight TX:240g RX:250g

Dimensions (W x D x H) 109.5 x 87.0 x 24mm each unit

RS232 serial bi-direction passback function.

• Supports baud rates of 4800, 9600, 19200, 28800, 38400, 57600 and 115200 and all

devices must be set to the same rate.

• Check the serial cable connections are as shown here:

• To check or set the baud rate use a serial port test tool

set to 115200 and connected to the port before powering the

units on. The test tool will report the current baud rate set.

• To adjust the baud rate to one of the above settings use the test tool ‘set’ command.

INFORMATION ON WASTE DISPOSAL FOR CONSUMERS OF ELECTRICAL &

ELECTRONIC EQUIPMENT.

When this product has reached the end of its life it must be treated as Waste Electrical & Electronic

Equipment (WEEE). Any WEEE marked products must not be mixed with general household waste,

but kept separate for the treatment, recovery and recycling of the materials used. Contact your local

authority for details of recycling schemes in your area.

Made in China. PR2 9PP

PO Box 13362 Dublin 2

Man Rev 1.1

CPC Farnell declares that the radio equipment for wireless transmitter/receivers is in

compliance with Radio Equipment Directive 2014/53/EU

Inhaltsverzeichnis

Andere PRO SIGNAL Extender Handbücher

PRO SIGNAL

PRO SIGNAL PSG3081 Bedienungsanleitung

PRO SIGNAL

PRO SIGNAL PSG3078 Bedienungsanleitung

PRO SIGNAL

PRO SIGNAL PSG3425 Bedienungsanleitung

PRO SIGNAL

PRO SIGNAL PSG3427 Bedienungsanleitung

PRO SIGNAL

PRO SIGNAL PSG3533 Bedienungsanleitung

PRO SIGNAL

PRO SIGNAL PSG3451 Bedienungsanleitung

PRO SIGNAL

PRO SIGNAL PSG3424 Bedienungsanleitung

PRO SIGNAL

PRO SIGNAL PSG3079 Bedienungsanleitung

PRO SIGNAL

PRO SIGNAL PSG3424 Bedienungsanleitung

PRO SIGNAL

PRO SIGNAL PSG3444 Bedienungsanleitung

PRO SIGNAL

PRO SIGNAL PSG3308 Bedienungsanleitung

PRO SIGNAL

PRO SIGNAL PSG3447 Bedienungsanleitung

PRO SIGNAL

PRO SIGNAL PSG03502 Bedienungsanleitung

PRO SIGNAL

PRO SIGNAL PSG3456 Bedienungsanleitung

PRO SIGNAL

PRO SIGNAL PSG3453 Bedienungsanleitung

PRO SIGNAL

PRO SIGNAL PSG3080 Bedienungsanleitung

PRO SIGNAL

PRO SIGNAL PSG3077 Bedienungsanleitung

PRO SIGNAL

PRO SIGNAL PSG3452 Bedienungsanleitung

PRO SIGNAL

PRO SIGNAL PSG3443 Bedienungsanleitung

PRO SIGNAL

PRO SIGNAL PSG3455 Bedienungsanleitung

PRO SIGNAL

PRO SIGNAL PSG3082 Bedienungsanleitung

PRO SIGNAL

PRO SIGNAL PSG08050 Bedienungsanleitung

PRO SIGNAL

PRO SIGNAL PSG3454 Bedienungsanleitung

PRO SIGNAL

PRO SIGNAL PSG3426 Bedienungsanleitung

Beliebte Extender Handbücher anderer Marken

SY HDBT-60T Bedienungsanleitung

Appsys ProAudio

Appsys ProAudio ADX-16 Bedienungsanleitung

Atlona

Atlona RS232 Bedienungsanleitung

IDK

IDK OPF-TH1000-A Bedienungsanleitung

Enable-IT

Enable-IT 824WP Bedienungsanleitung

Worx

Worx Landroid RadioLink WA0864 Technisches Datenblatt

TP-Link

TP-Link TL-WA730RE Bedienungsanleitung

Camplex

Camplex CMX-HDMI-SFPL Bedienungsanleitung

SC&T

SC&T HE03-4K Bedienungsanleitung

Samsung

Samsung SCS-26UC4 Bedienungsanleitung

Foxun

Foxun SX-GES24 Bedienungsanleitung

MuxLab

MuxLab 500771 Bedienungsanleitung

foxunhd

foxunhd SX-AEX01 Bedienungsanleitung

TERK Technologies

TERK Technologies LFIRX2 Bedienungsanleitung

Devolo

Devolo Audio Extender Handbuch

Edimax

Edimax EW-7438RPn V2 Bedienungsanleitung

Shinybow USA

Shinybow USA SB-6335T5 Bedienungsanleitung

SECO-LARM

SECO-LARM ENFORCER EVT-PB1-V1TGQ Bedienungsanleitung