PROAIM SL-CSMO-01 Bedienungsanleitung
1
Instruction Manual
Proaim Cosmo Camera
Slider Dolly (SL-CSMO-01)
2
At Proaim, our goal is to ensure 100% Customer Sasfacon in all that we do.
We back our sales with a 1 year warranty from the date of purchase and work hard
to resolve any problems in the unlikely event one should arise.
With our commitment to connuous improvement and your Feedback, building on
our reputaon of providing aordable, quality products is
PRIORITY #1.
Subject Page
Foreword 2
Introducon 3
Kit Included 4
Safety Hints 5
Assembling 6-10
Warranty 10-11
Table of Contents
3
Dear Client,
On behalf of all the people that work so hard to provide you with the most
up-to-date, exible and cost-ecient producon gear, we would like to welcome
you into the Proaim family.
By purchasing your Cosmo 8 Professional Camera Slider Dolly Camera Jib , you
have just joined a host of designers, engineers, machinists, assembly, customer
service and oce sta that take great pride in all that they do. Our mantra of
connuous improvement has been the guiding principle of how we conduct our
business since day one.
Once you have the opportunity to experience your new Proaim Cosmo 8
Professional Camera Slider Dolly, we hope you will agree that we cra quality
products at a compeve price. Products designed to meet and exceed the
standards of today’s real producon world.
Standards set by our valued clients and standards we strive to maintain.
With Best Wishes,
Proaim Team
Welcome To Proaim!
4
Proaim Cosmo Slider is designed for the mes where you just want to do a lile 6'
to 8' dolly move without a lot of setup. The Cosmo Slider is easy to set up, can
be used with a variety of track opons, and can be supported using standard
100mm stands, apple boxes, or the ground, whatever the shot requires.
Whether you're an established professional or just geng started, the Cosmo Slider
is a great soluon for adding producon value to your shoot. Designed to be
exible, aordable, and easy to set up, the design is both simple and praccal. The
Mitchell Mount with available adapters takes all types of camera heads. The eight
wheel design with 16 high-speed bearings provides a smooth glide.
Introducon
What’s In The Box
4 cosmo slider with camera slider
150mm Bowl
75mm conversion
ring
Female Euro
Mitchel plate
2 X 4 extension tubes
6 X End Feet
3 x Bowl mounng
adapters 2 x End Breaks
Bush with Screw
support bar
Please inspect the contents of your shipped package to ensure you have received
everything that is listed below.
5
Safety Hints
ATTENTION: PLEASE READ THIS BEFORE USING TO PREVENT SERIOUS
DAMAGE TO EQUIPMENT!
NEVER USE THE TRACK IN SAND, DIRT, CAUSTIC, OR SALT WATER
ENVIRONMENTS!
This will cause irreparable damage to the bearings and rails, requiring complete
replacement!
DO NOT OVERTIGHTEN CARRIAGE BRAKE!
Needlessly over ghtening the carriage brake can cause misalignment and severely
damage the roller bearings!
ALWAYS USE EXTREME CAUTION WHEN USING THE TRACK ON A
TRIPOD!
Load shi occurs when the camera moves along the track. This can cause the
camera and slider to tumble over resulng in catastrophic damage! Always use
sandbags on the legs and support on the ends to prevent this!
FOLLOWING THESE GUIDELINES WILL PROVIDE BETTER IMAGES AND TROUBLE FREE
OPERATION.
SHOULD YOU NEED ADDITIONAL INFORMATION, TECHNICAL ASSISTANCE IS AVAILA-
BLE ‘ONLINE’ BY CONTACTING YOUR SALES REPRESENTATIVE.
6
Assembling
You will receive the cosmo 4 slider in camera plaorm aached to it. Loosen the knob to
move the top plaorm length and ghten it to lock when you need stac shots.
Loosen the knob of support bar and insert the end feet into the support bar and ghten the
knob to secure properly.
Slide the end break at both ends of the track and ghten the allen bolts to secure properly.
7
Now 4 cosmo slider is ready to use you
can mount your camera setup, as
desired.
Aach 4 Track secon with another 4 Track secon, by using push-t connecvity to
increase the length. Then ghten the allen bolts , as shown in image.
ASSEMBLING OF 8FT SLIDER
Aach the support bar at the end of 8 length by sliding the track onto the support bar.
Tighten the align bolts with the help of allen key.
Note: Aach the track secon by proper align the secon to avoid jerk While using the slider.
8
Slide the end break at both ends of the track and ghten the allen bolts to secure properly.
NOTE: Cosmo Slider accommodates 4 types of Camera Mounng Heads.
75mm Bowl / 100mm Bowl / 150mm Bowl / Mitchell Base
The standard 100mm Bowl Receptacle is
aached by default onto the Dolly. Add
75mm Conversion Ring to use 75mm
Bowl Head with Dolly.
Loosen the bolts with the help of allen key and remove the 100mm bowl as shown below.
9
Mount your female euro directly to the
camera plaorm and ghten the four
allen bolts as shown. In order to use
euro mount accessories.
Tighten the screw with the help of allen
key to secure the Mitchell plate.
Insert provided screw into the Mitchell plate, Place the bush onto the Mitchell plate as shown
Note: Similarly loosen the allen bolts and remove the female euro.
10
NOTE: Follow same steps as for 150mm
bowl.
(SHOWN WITH OPTIONAL ACCESSORIES)
YOUR PROAIM COSMO SLIDER
ALL DRESSED UP AND READY TO GO
WARRANTY
We oer a one year warranty for our products from the date of purchase.
We will repair or replace your product, free of charge, in the event of a defect in materials or
crasmanship obtained during normal use or handling based on the user manual. Please note
that we will not cover any shipping costs for returning the product to us. If any VAT or import
dues are applied to the return, we will also charge these costs to the customer.
Inhaltsverzeichnis
Andere PROAIM Kamerazubehör Handbücher
PROAIM
PROAIM VI-ISSC-8 Bedienungsanleitung
PROAIM
PROAIM LV-3WAY-01 Bedienungsanleitung
PROAIM
PROAIM P-12-JS Bedienungsanleitung
PROAIM
PROAIM VH-OBTR-01 Bedienungsanleitung
PROAIM
PROAIM CINEMA P-SWCC-10 Bedienungsanleitung
PROAIM
PROAIM CINEMA Series Bedienungsanleitung
PROAIM
PROAIM CINEMA Series Bedienungsanleitung
PROAIM
PROAIM P-CST Bedienungsanleitung
PROAIM
PROAIM CINEMA Series Bedienungsanleitung
PROAIM
PROAIM P-GDTR-01 Bedienungsanleitung
PROAIM
PROAIM FLN-CTDB Bedienungsanleitung
PROAIM
PROAIM Wave-2 Plus Bedienungsanleitung
PROAIM
PROAIM P-GHF-01 Bedienungsanleitung
PROAIM
PROAIM P-TRK-12 Bedienungsanleitung
PROAIM
PROAIM CINEMA Series Bedienungsanleitung
PROAIM
PROAIM CINEMA TP-BIPT-01 Bedienungsanleitung
PROAIM
PROAIM P-SPK-13 Bedienungsanleitung
PROAIM
PROAIM CINEMA Series Bedienungsanleitung
PROAIM
PROAIM ROM-1 Bedienungsanleitung
PROAIM
PROAIM TDL-275 Bedienungsanleitung
