ProLights JETSPOT-3 Bedienungsanleitung

USER MANUAL

JETSPOT-3

MOVING HEAD

reproduced in any form or by any means for any commercial use.

In order to improve the quality of products, PROLIGHTS reserves the right to modify the characteristics

stated in this instruction manual at any time and without prior notice.

All revisions and updates are available in the ‘manuals’ section on site www.prolightsamerica.com

JETSPOT- 3

Packing content • JETSPOT-3

• Mount bracket

• User manual

TABLE OF CONTENTS Safety

General instructions

Warnings and installation precautions

1 Introduction

1. 1 Description

1. 2 Technical specications

1. 3 Operating elements and connections

2 Installation

2. 1 Mounting

3 Functions and settings

3. 1 Operation

3. 2 Basic

3. 3 Using the menu

3. 4 Menu structure

3. 5 Linking

3. 6 DMX address

3. 7 DMX mode

3. 8 DMX addressing

3. 9 Fixture settings

3. 10 Advanced

3. 11 Fixture information

3. 12 Operation in automatic mode

3. 13 Automatic mode speed

3. 14 Connection of the DMX line

3. 15 Construction of the DMX termination

3. 16 DMX control

3. 17 Colors and gobos

4 Maintenance

4. 1 Maintenance and cleaning the unit

4. 2 Fuse replacement

4. 3 Trouble shooting

JETSPOT- 3

WARNING! Before carrying out any operations with the unit, carefully read this instruction

manual and keep it with cure for future reference. It contains important information about

the installation, usage and maintenance of the unit.

SAFETY

General instruction

• The products referred to in this manual conform to the European Community Directives and are there-

fore marked with .

• The unit is supplied with hazardous network voltage (230V~). Leave servicing to skilled personnel only.

Never make any modications on the unit not described in this instruction manual, otherwise you will

risk an electric shock.

• Connection must be made to a power supply system tted with ecient earthing (Class I appliance ac-

cording to standard EN 60598-1). It is, moreover, recommended to protect the supply lines of the units

from indirect contact and/or shorting to earth by using appropriately sized residual current devices.

• The connection to the main network of electric distribution must be carried out by a qualied electrical

installer. Check that the main frequency and voltage correspond to those for which the unit is designed

as given on the electrical data label.

• This unit is not for home use, only professional applications.

• Never use the xture under the following conditions:

- in places wet;

- in places subject to vibrations or bumps;

- in places with an ambient temperature of over 45°C.

• Make certain that no inammable liquids, water or metal objects enter the xture.

• Do not dismantle or modify the xture.

• All work must always be carried out by qualied technical personnel. Contact the nearest sales point for

an inspection or contact the manufacturer directly.

• If the unit is to be put out of operation denitively, take it to a local recycling

plant for a disposal which is not harmful to the environment.

Warnings and installation precautions

• If this device will be operated in any way dierent to the one described in this manual, it may suer

damage and the guarantee becomes void. Furthermore, any other operation may lead to dangers like

short circuit, burns, electric shock, etc.

• Before starting any maintenance work or cleaning the projector, cut o power from the main supply.

• Always additionally secure the projector with the safety rope. When carrying out any work, always com-

ply scrupulously with all the regulations (particularly regarding safety) currently in force in the country

in which the xture’s being used.

• For inside use only. Not designed for outside use.

• The minimum distance between the xture and surrounding walls must be more than 50 cm and the

air vents at the housing must not be covered in any case.

• Install the xture in a well ventilated place.

• Keep any inammable material at a safe distance from the xture.

• The maximum temperature that can be reached on the external surface of the tting, in a thermally

steady state, is high. After power o, please cool down over 15 minutes.

• Shields, lenses or ultraviolet screens shall be changed if they have become damaged to such an extent

that their eectiveness is impaired.

• The lamp (LED) shall be changed if it has become damaged or thermally deformed.

• Never look directly at the light beam. Please note that fast changes in lighting, e. g. ashing light, may

trigger epileptic seizures in photosensitive persons or persons with epilepsy.

JETSPOT- 3

- 1 - INTRODUCTION

1.1 DESCRIPTION

JET series projectors are moving head based on a special LED optical system with a white LED source.

Despite the very compact sizes, are the most ecient luminaires in its range.

The compact-size structure, the rapid movements and silent operations grant this projectors to be a valu-

able solution for lighting projects in limited-space environments like live stages and clubs.

1.2 TECHNICAL SPECIFICATIONS

LIGHT SOURCE

• Source: 240w High Power White LED

• CT:7500 K

• CRI:78 Ra

• Luminous Flux: 10799lm

• Lux: 8099 lux @3m

• Lux: 729 lux @10m

• Source Life Expectancy: >30.000 h

OPTICS

• Beam Angle: 20°

• Lens Diameter: 74mm

• Lens Type: HQ glass lens optics

• Focus: Motorised

COLOR SYSTEM

• Color Wheel: 2x7 dichroic lters+Open

DYNAMIC EFFECTS

• Rotating Gobos: 7 Rotating gobos+Open, Interchangeable, Indexing

• Gobo Size: gobo Ø 26.9 mm - img vØ 23 mm - 0.3 mm

• Fixed gobos: 8 Fixed gobos+Open, Interchangeable

• Gobo Size: gobo Ø 29.8 mm - img vØ 23 mm - 0.3 mm

• Circular Prism: 3f with bi-directional rotation, Indexing

• Frost: Linear 0-100% frost lter

• Iris: 5~100% motorized linear iris

• Auto Mode: Built-in programs with execution speed adjustment

BODY

• Pan Angle: 540°

• Tilt Angle: 260°

• Pan/Tilt Resolution: 16 bit

• Feedback: Automatic repositioning after accidental movement

• Body: Aluminium structure with hi-resistance polycarbonate cover

• Body Color: Black

CONTROL

• Protocols: DMX512, RDM

• Dmx Channels: 17/19ch

JETSPOT- 3

• RDM: RDM ready for xture remote monitor and settings

• Display: Black OLED high resolution display

• Firmware Upgrade: Yes, via USB-DMX interface (UPBOX1) not included

• Master/Slave: for synchronized operation of more units linked in a chain

ELECTRONICS

• Dimmer: Linear 0~100% electronic dimmer

• Strobe/Shutter: 0~30 Hz, electronic

• Battery Backup: Battery backup for user operation without connecting to the main power

• Operating Temperature: -10° ~ +45°

• Flicker: Flicker free operation

ELECTRICAL

• Power Supply: 100-240V – 50/60Hz

• Power Consumption (at 230V): 316W

• Power Consumption (at 120V): 322W

• Output (at 230V): 11 units on a single power line

• Output (at 120V): 6 units on a single power line

PHYSICAL

• Signal Connection: DMX 3p+5p IN/OUT

• Power Connection: IN/OUT Neutrik Truecon

• IP:20

• Cooling: Forced air with low noise fan

• Suspension And Fixing: Any position with“quick-lock”omega brackets

• Dimensions (WxHxD):344x500x257 mm

• Weight:17.3 kg

Fig.1

500mm/19,68in

355mm/13,98in 257mm/10,11in

Technical drawing

JETSPOT- 3

Fig.2

5610 119

1.3 OPERATING ELEMENTS AND CONNECTIONS

1. MOVING HEAD

2. ROTARY ARM

3. CONTROL PANEL with LCD display

and 5 button used to access

the control panel functions and

manage them.

4. LED INDICATOR

5. DMX IN (3-pole XLR): 1 = ground, 2

= DMX -, 3 = DMX +

6. DMX OUT ( 3-pole XLR): 1 =

ground, 2 = DMX -, 3 = DMX +

7. DMX IN (5-pole XLR):

1 = ground, 2 = DMX-, 3 = DMX+,

4 N/C, 5 N/C

8. DMX OUT (5-pole XLR):

1 = ground, 2 = DMX-, 3 = DMX+,

4 N/C, 5 N/C

9. MAIN FUSE HOLDER: replace a

burnt-out fuse by one of the same

type only.

10. POWER IN (PowerCON IN):

for connection to a socket

(100-240V~/50-60Hz) via the

supplied mains cable.

11. POWER OUT: (PowerCON OUT) to

connect multiple units in series.

View A

View B

JETSPOT- 3

- 2 - INSTALLATION

Fig.3

2.1 MOUNTING

The JET SPOT-3 may be set up on a solid and even surface. By means of the xing facilities of the baseplate,

the unit can also be mounted upside down to a cross arm. The base plate is shown in g.3. For xing, stable

mounting clips are required. According to the gure, the bolts of the brackets are placed into the openings

provided in the base plate and turned clockwise until they lock (to the stop). Always ensure that the unit

is rmly xed to avoid vibration and slipping while operating. The mounting place must be of sucient

stability and be able to support a weight of 10 times of the unit’s weight. When carrying out any installa-

tion, always comply scrupulously with all the regulations (particularly regarding safety) currently in force

in the country in which the xture’s being used. Always additionally secure the projector with the safety

rope from falling down. For this purpose, fasten the safety rope at a suitable position so that the maximum

fall of the projector will be 20 cm.

CLAMP

SAFETY

CABLE

OMEGA

BRACKETS

JETSPOT- 3

- 3 - FUNCTIONS AND SETTINGS

3.1 OPERATION

Connect the supplied main cable to a socket (100-240V~/50-60Hz). The unit will run built-in program to

reset all motors to their home position. Shortly after that the JETSPOT-3 is ready for operation. To switch

o, disconnect the mains plug from the socket. For a more convenient operation it is recommended to

connect the unit to a socket which can be switched on and o via light switch.

3.2 BASIC

The control panel of JETSPOT-3 has a display and 5 buttons for the complete programming and manage-

ment of the projector menu (g.4).

Fig.4 - Functions of the buttons

UP DOWN MENU ENTER

Increases the value

displayed or passes to

the previous item in a

Decreases the value

displayed or passes to

the next item in the

To enter in the main

menù or to return to the

top level

Conrms the displayed

value, or activates the

displayed function, or

enters the successive

Reversal of the display

To activate this function, hold simultaneously for 3 seconds UP and DOWN buttons while the display

is in the rest mode. This status will be memorised and maintained even for the next time it will be

switched on.

To return to the initial state, repeat the operation all over again.

JETSPOT- 3

3.3 USING THE MENU

1. Press the ENTER button to access the main menu.

2. Use the UP/DOWN button to select the menu to be used:

• Connect;

• Setup;

• Advanced;

• Information;

• Stand alone;

3. Press ENTER to display the rst item in the selected menu.

4. Use the UP/DOWN button to select the menu items.

NOTE - The display can be in one of two conditions: rest status and setting status. When it is in the rest sta-

tus, the display shows the projector’s DMX address. During menu setting status, after a wait time without

any key having been pressed, the display automatically returns to rest status.

It should be noted than when this condition occurs, any possible value that has been modied but not yet

conrmed with the ENTER button will be cancelled.

3.4 MENU STRUCTURE

1CONNECT ðDMX Address ðValue (1-512)

DMX Mode ðStandard - 17CH

Extended - 19CH

2SET UP ðMovement ðPan Reverse ðYES/NO

Tilt Reverse ðYES/NO

Pan Feedback ðYES/NO

Tilt Feedback ðYES/NO

Screen ðBacklight ðON

10s

20s

30s

Flip Display ðYES/NO

Warn Cue ðON/OFF

Key Lock ðYES/NO

Fixture ðFan mode ðAtuo/High

Temperature unit ðC°/F°

Auto Test ðAuto Test

Manual Test ðPan

Pan Fine

Tilt

Tilt Fine

Pan/Tilt Speed

Dimmer

Shutter

Color1

Color2

ðValue (000-255) for each function

Inhaltsverzeichnis

Andere ProLights DJ-Equipment Handbücher

ProLights

ProLights BATPAR180 Bedienungsanleitung

ProLights

ProLights ARENACOB4FC Bedienungsanleitung

ProLights

ProLights LEDPAR64363RGB Bedienungsanleitung

ProLights

ProLights SUNRISE2 Bedienungsanleitung

ProLights

ProLights VX1300SNOW Bedienungsanleitung

ProLights

ProLights AlphaPIX6T Bedienungsanleitung

ProLights

ProLights ARCLED7314HD Bedienungsanleitung

ProLights

ProLights SMARTTUBE32 Bedienungsanleitung

ProLights

ProLights SUPERFLOWER DMX led Bedienungsanleitung

ProLights

ProLights LUMIPAR12UAW Bedienungsanleitung

ProLights

ProLights RA3000Profile Bedienungsanleitung

ProLights

ProLights TRIBE LUMIPIX12UT Bedienungsanleitung

ProLights

ProLights Tribe LUMIPIX12UQPRO Bedienungsanleitung

ProLights

ProLights PIXBAR4 Bedienungsanleitung

ProLights

ProLights STARBALL Bedienungsanleitung

ProLights

ProLights CROMOSPOT400 Bedienungsanleitung

ProLights

ProLights SMARTBATHEX Bedienungsanleitung

ProLights

ProLights STARK1000 Bedienungsanleitung

ProLights

ProLights PANORAMAIPSPOT Bedienungsanleitung

ProLights

ProLights PIXIEWASHXB Bedienungsanleitung

ProLights

ProLights PIXIEWASH Bedienungsanleitung

ProLights

ProLights QUADMOON Bedienungsanleitung

ProLights

ProLights ARCPOD27Q Bedienungsanleitung

ProLights

ProLights RADIONSTR Bedienungsanleitung

Beliebte DJ-Equipment Handbücher anderer Marken

ALPHA LITE

ALPHA LITE ALPHA 1500 Betriebsanleitung

Chauvet

Chauvet OVATION E-930VW Bedienungsanleitung

Zumtobel

Zumtobel APHRODITE Home Bedienungsanleitung

Snow Masters

Snow Masters Zig Oscillator Bedienungsanleitung

EuroLite

EuroLite 50530554 Bedienungsanleitung

Beamz

Beamz BUV243 Bedienungsanleitung

thomann

thomann Stairville DJ Lase 40-G MK-III Bedienungsanleitung

Eagletone

Eagletone 6 Eyes Flower Bedienungsanleitung

EuroLite

EuroLite FLD-1508 Bedienungsanleitung

Technical Pro

Technical Pro LG8xSEA Bedienungsanleitung

JB Systems

JB Systems Lounge Laser DMX Bedienungsanleitung

Lightmaxx

Lightmaxx Vega Halo 90 Bedienungsanleitung

Elation

Elation FUZE WASH Z350 Bedienungsanleitung

Maverick

Maverick MK3 WASH Bedienungsanleitung

Infinity

Infinity TF-260C7 Fresnel Bedienungsanleitung

Chauvet

Chauvet EVE E-50Z Bedienungsanleitung

Eliminator Lighting

Eliminator Lighting E 138 Bedienungsanleitung

EuroLite

EuroLite Mini Multicolor LED Flashing Light SC Bedienungsanleitung