ProLights ARENACOB4FC Bedienungsanleitung

MANUALE UTENTE

USER MANUAL

ARENACOB4FC

IT - EN

LED BLINDER

ARENACOB4FC

Packing content ARENACOB4FC

• Mount bracket

• Power cable

• User manual

TABLE OF CONTENTS Safety

General instructions

Warnings and installation precautions

General information

1 Introduction

1. 1 Description

1. 2 Technical specications

1. 3 Operating elements and connections

2 Installation

2. 1 Mounting

3 Functions and settings

3. 1 Operation

3. 2 Basic

3. 3 Menu structure

3. 4 DIMMER

3. 5 Back Light

3. 6 Information mode

3. 7 White Balance

3. 8 Key Lock

3. 9 Master/Slave mode

3. 10 Linking

3. 11 DMX mode

3. 12 DMX addressing

3. 13 Connection of the DMX line

3. 14 Construction of the DMX termination

3. 15 DMX control

4 Maintenance

4. 1 Maintenance and cleaning the unit

4. 2 Fuse replacement

4. 3 Trouble shooting

Warranty

ARENACOB4FC

SAFETY

General instruction

• The products referred to in this manual conform to the European Community Directives and are there-

fore marked with .

• The unit is supplied with hazardous network voltage (230V~). Leave servicing to skilled personnel only.

Never make any modications on the unit not described in this instruction manual, otherwise you will

risk an electric shock.

• Connection must be made to a power supply system tted with ecient earthing (Class I appliance ac-

cording to standard EN 60598-1). It is, moreover, recommended to protect the supply lines of the units

from indirect contact and/or shorting to earth by using appropriately sized residual current devices.

• The connection to the main network of electric distribution must be carried out by a qualied electrical

installer. Check that the main frequency and voltage correspond to those for which the unit is designed

as given on the electrical data label.

• This unit is not for home use, only professional applications.

• Never use the xture under the following conditions:

- in places subject to vibrations or bumps;

- in places with a temperature of over 40 °C.

• Make certain that no inammable liquids, water or metal objects enter the xture.

• Do not dismantle or modify the xture.

• All work must always be carried out by qualied technical personnel. Contact the nearest sales point for

an inspection or contact the manufacturer directly.

• If the unit is to be put out of operation denitively, take it to a local recycling

plant for a disposal which is not harmful to the environment.

Warnings and installation precautions

• If this device will be operated in any way dierent to the one described in this manual, it may suer

damage and the guarantee becomes void. Furthermore, any other operation may lead to dangers like

short circuit, burns, electric shock, etc.

• Before starting any maintenance work or cleaning the projector, cut o power from the main supply.

• Always additionally secure the projector with the safety rope.When carrying out any work, always com-

ply scrupulously with all the regulations (particularly regarding safety) currently in force in the country

in which the xture’s being used.

• Install the xture in a well ventilated place.

• Keep any inammable material at a safe distance from the xture.

• Shields, lenses or ultraviolet screens shall be changed if they have become damaged to such an extent

that their eectiveness is impaired.

• The lamp (LED) shall be changed if it has become damaged or thermally deformed.

• Never look directly at the light beam. Please note that fast changes in lighting, e. g. ashing light, may

trigger epileptic seizures in photosensitive persons or persons with epilepsy.

• Do not touch the product’s housing when operating because it may be very hot.

WARNING! Before carrying out any operations with the unit, carefully read this instruction

manual and keep it with cure for future reference. It contains important information about

the installation, usage and maintenance of the unit.

ARENACOB4FC

GENERAL INFORMATION

Shipments and claims

The goods are sold “ex works” and always travel at the risk and danger of the distributor. Eventual dam-

age will have to be claimed to the freight forwarder. Any claim for broken packs will have to be forwarded

within 8 days from the reception of the goods.

Warranty and returns

The guarantee covers the xture in compliance with existing regulations. You can nd the full version of

the “General Guarantee Conditions” on our web site www.musiclights.it. Please remember to register the

piece of equipment soon after you purchase it, logging on www.musiclights.it. The product can be also

registered lling in and sending the form available on your guarantee certicate. For all purposes, the va-

lidity of the guarantee is endorsed solely on presentation of the guarantee certicate. Music & Lights will

verify the validity of the claim through examination of the defect in relation to proper use and the actual

validity of the guarantee. Music & Lights will eventually provide replacement or repair of the products de-

clining, however, any obligation of compensation for direct or indirect damage resulting from faultiness.

ARENACOB4FC

- 1 - INTRODUCTION

1.1 DESCRIPTION

ARENACOB4 FC is a proper, full color replacement for an“old school”4 cell Blinder.

Each of the ARENACOB4 FC’s 100W RGBW LED Pods deliver a consistent, powerful punch with indivodual con-

trol of each cell. The clever rigging system allows the creative freedom to use the xture as a building block

oering virtually limitless possibilities.

With an IP54 housing, magnetic lens options, individual control of each LED cell, clever rigging system and cell

spacing that matches a standard blinder the ARENACOB4 is not only powerful but also unbelievably exible.

1.2 TECHNICAL SPECIFICATIONS

Light source

• Source: 4x75 W RGBW LEDs

• Luminous Flux: 5726lm

• Lux: (24°) 2413lux @3m Full

• Source Life Expectancy: >50.000 h

OPTICS

• Beam Angle: (inc) 24° - (opt) 40°

• Field Angle: 42°

• Pixel pitch: 150mm

• Lens Diameter: 100mm

• Lens Type: Dichroic parabolic reector in combination with HD fresnel lens

• Additional Optics: 40°(opt), 32° without magnetic lens

• Magnetic replacement of front lens

COLOR SYSTEM

• Color Mixing: RGBW/FC

• CTC: CTC control through independent DMX channel

• White Presets: 2000~8000K

• Color Wheel: Virtual color wheel with presets

DYNAMIC EFFECTS

• Pixel Patterns: Preprogrammed dynamic and static patterns

• FX Generator: Adjustable foreground/background color, index, speed, direction

• Static Color Mode: Selection of static color

• Manual Color Mode: Manual adjustment of color

• Auto Mode: Built-in programs with execution speed adjustment

• Halo DWE dimming and amber-shift simulation

BODY

• Hardware On-board: On board mechanics for modular assembly of multiple panels

• Body: Sturdy die-cast aluminium body conceived for long-time durability

• Body Color: Black

CONTROL

• Protocols: DMX, RDM

• Dmx Channels: HALO 1/4ch - STD 4/6/15ch - EXT16/21/27ch

• Pixel Control: Pixel2Pixel control

• RDM: RDM ready for xture remote monitor and settings

• Display: Black OLED touch display

• Firmware Upgrade: Yes, via USB-DMX interface (UPBOX1) not included

ARENACOB4FC

• Master/Slave: for synchronized operation of more units linked in a chain

ELECTRONICS

• Dimmer: Linear 0~100% electronic dimmer

• Dimmer Curves: 4 Dierent dimming curves available

• Strobe/Shutter: 1-28 Hz, electronic

• Battery Backup: Battery backup for user operation without connecting to the main power

• Operating Temperature: -10/45°

• Flicker: Flicker free frequency

ELECTRICAL

• Power Supply: 100-240V – 50/60Hz

• Power Consumption (at 230V): 227W

• Power Consumption (at 120V): 230W

• Power Output (at 230V): 15 units on a single power line

• Power Output (at 120V): 7 units on a single power line

PHYSICAL

• Signal Connection: 5p IP in/out

• Power Connection: Seetronic Powerkon IP54 in/out

• IP: 54 Protective vent to prevent condensation, dust, compensate pressure

• Cooling: Natural cooling of the peculiar chassis and to absence of fans

• Suspension And Fixing: Hanging bracket suitable for safe hanging and for oor positioning

• Dimensions (WxHxD): 619x167x264mm

• Weight: 7,9Kg

Fig.1

Photometric data

Technical drawing

264.4

619

167

Illuminance at a Distance

24°-RGBW

1.0m

3.0m

5.0m

7.0m

10.0m

1.22m

0.41m

2.03m

2.85m

Lux Center Beam Angle: 23° Beam Width

3167lx

28505lx

1140lx

581.7lx

4.07m285lx

ARENACOB4FC

1.3 OPERATING ELEMENTS AND CONNECTIONS

1. LOCKING KNOB for the mounting bracket

2. POWER IN (PowerCON TRUE IN): for

connection to a socket (100-240V~/50-60Hz)

via the supplied mains cable.

3. DMX IN (5-pole XLR):

1 = ground, 2 = DMX-, 3 = DMX+, 4 N/C, 5 N/C

4. CONTROL PANEL with display and 4 button

used to access the control panel functions

and manage them

5. DMX OUT (5-pole XLR):

1 = ground, 2 = DMX-, 3 = DMX+, 4 N/C, 5 N/C

6. POWER OUT (PowerCON TRUE OUT): power

output for connection of multiple units in

series.

7. SCREW-IN PROTECTIVE VENTS

Rear panel Fig.2

12 3 4 5 6

ARENACOB4FC

- 2 - INSTALLATION

2.1 MOUNTING

ARENACOB4FC may be set up on a solid and even surface. More units can also be mounted together with

the included hardware (max 10 pcs for each column). For xing, stable mounting clips are required. The

mounting place must be of sucient stability and be able to support a weight of 10 times of the unit’s

weight.

When carrying out any installation, always comply scrupulously with all the regulations (particularly re-

garding safety) currently in force in the country in which the xture’s being used.

• Install the projector at a suitable location by means of the mounting bracket (2).

• Always additionally secure the projector with the safety rope from falling down. For this purpose, fas-

ten the safety rope at a suitable position so that the maximum fall of the projector will be 20 cm.

• Adjust the projector and use the screw to slightly release or tighten the locking mechanism of the

bracket if is necessary (1).

Fig.3

MAX 10 pcs

CLAMP

SAFETY

ROPE

ARENACOB4FC

- 3 - FUNCTIONS AND SETTINGS

3.1 OPERATION

Connect the supplied main cable to a socket (100-240V~/50-60Hz). Then the unit is ready for operation

and can be operated via a DMX controller or it independently performs its show program in succession.

To switch o, disconnect the mains plug from the socket. For a more convenient operation it is recom-

mended to connect the unit to a socket which can be switched on and o via a light switch.

3.2 BASIC

Access control panel functions using the four panel buttons located directly underneath the black OLED

display (g.4).

Fig.4 - Functions of the buttons

MODE UP DOWN ENTER

Used to access the menu or

to return a previous menu

option

Navigates downwards through

the menu list and increases

the numeric value when in a

function

Navigates upwards through

the menu list and decreases

the numeric value when in

a function

Used to select and store the

current menu or conrm the

current function value or

option within a menu

Mode

Enter

Down

ARENACOB4FC

3.3 MENU STRUCTURE

MENU (LEVEL 1) (LEVEL 2) (LEVEL 3) DESCRIPTION

1 DMX Address Address DMX address

Default: 001

< 001 > < 001>

2 DMX Channel Channel

DMX Channel mode

< STD 15Ch > < HALO 1 ch >

< HALO 4 ch >

< STD 4 ch >

< STD 6 ch >

< STD 15 ch >

< EXT 16 ch >

< EXT 19 ch >

< EXT 25 ch >

3 Dimmer Mode Dimmer Mode Default: O

< O > < O > O: Dimmer speed On/O

<Dimmer1> Dim 1: Dimmer speed fast

<Dimmer2> Dim 2: Dimmer speed middle

<Dimmer3> Dim 3: Dimmer speed slow

4 White Balance White Balance

LED color calibration.

Default: RGBW=255

< OFF > < OFF >

< Manual > < R=125~255 >

< G=125~255 >

< B=125~255 >

< W=125~255 >

5 Static Fixed Color Value

Static color

Default: RGBW

< R > < RGW >

< G > < RBW >

< B > < GBW >

< W > < RGBW >

< GB > < Wht 2000K >

< RB > < Wht 3000K >

< RG > < Wht 4000K >

< RGB > < Wht 5000K >

< RW > < Wht 6000K >

< GW > <Wht 7000K >

< BW > < Wht 8000K >

Manual Color Value

Mix a custom color as static

Default: RGBW=255

< R=255 >

< G=255 >

< B=255 >

< W=255 >

Inhaltsverzeichnis

Andere ProLights DJ-Equipment Handbücher

ProLights

ProLights ARCLED7307HD Bedienungsanleitung

ProLights

ProLights PF5 Series Bedienungsanleitung

ProLights

ProLights DISPLAYCOBTRWDFC Bedienungsanleitung

ProLights

ProLights AlphaPIX6T Bedienungsanleitung

ProLights

ProLights JETSPOT-3 Bedienungsanleitung

ProLights

ProLights BEAMROLL8Q Bedienungsanleitung

ProLights

ProLights Z7SPOT Bedienungsanleitung

ProLights

ProLights ECLIPSE FRESNEL TU Bedienungsanleitung

ProLights

ProLights LUMIPIX 12QIP Bedienungsanleitung

ProLights

ProLights VX1300SNOW Bedienungsanleitung

ProLights

ProLights MOSAICOXL Bedienungsanleitung

ProLights

ProLights Tribe LUMIPIX12UQ Bedienungsanleitung

ProLights

ProLights MINIECLIPSE Series Bedienungsanleitung

ProLights

ProLights VORTEX VXBUBBLE Bedienungsanleitung

ProLights

ProLights PIXIEWASH Bedienungsanleitung

ProLights

ProLights V575WASH Bedienungsanleitung

ProLights

ProLights AIR5FAN Bedienungsanleitung

ProLights

ProLights RA2000PROFILE Bedienungsanleitung

ProLights

ProLights LASERCOMBY Bedienungsanleitung

ProLights

ProLights POLAR500 Bedienungsanleitung

ProLights

ProLights SUNBAR2500MAX Bedienungsanleitung

ProLights

ProLights EclSoft LinearIP Bedienungsanleitung

ProLights

ProLights LUMIPAR12UQPRO Bedienungsanleitung

ProLights

ProLights LUMIPAR12UAW Bedienungsanleitung

Beliebte DJ-Equipment Handbücher anderer Marken

ALPHA LITE

ALPHA LITE ALPHA 1500 Betriebsanleitung

Chauvet

Chauvet OVATION E-930VW Bedienungsanleitung

Snow Masters

Snow Masters Zig Oscillator Bedienungsanleitung

EuroLite

EuroLite 50530554 Bedienungsanleitung

Beamz

Beamz BUV243 Bedienungsanleitung

thomann

thomann Stairville DJ Lase 40-G MK-III Bedienungsanleitung

Eagletone

Eagletone 6 Eyes Flower Bedienungsanleitung

EuroLite

EuroLite FLD-1508 Bedienungsanleitung

Technical Pro

Technical Pro LG8xSEA Bedienungsanleitung

JB Systems

JB Systems Lounge Laser DMX Bedienungsanleitung

Lightmaxx

Lightmaxx Vega Halo 90 Bedienungsanleitung

Elation

Elation FUZE WASH Z350 Bedienungsanleitung

Maverick

Maverick MK3 WASH Bedienungsanleitung

Infinity

Infinity TF-260C7 Fresnel Bedienungsanleitung

Chauvet

Chauvet EVE E-50Z Bedienungsanleitung

Eliminator Lighting

Eliminator Lighting E 138 Bedienungsanleitung

EuroLite

EuroLite Mini Multicolor LED Flashing Light SC Bedienungsanleitung

KAM

KAM DMX Laser80 FScan Bedienungsanleitung