ProLights AlphaPIX6T Bedienungsanleitung

ASSEMBLY INSTRUCTIONS

APIX6T

reproduced in any form or by any means for any commercial use.

In order to improve the quality of products, Music&Lights S.r.l. reserves the right to modify the

characteristics stated in this instruction manual at any time and without prior notice.

All revisions and updates are available in the ‘manuals’ section on site www.musiclights.it

REV.001-06/16

APIX6T

TABLE OF CONTENTS Safety

General instructions

Warnings and installation precautions

General information

1 Introduction

1. 1 Description

2 Installation

2. 1 Mechanical Requirements

2. 2 Electrical Requirements

2. 3 System Requirements

3 System

3. 1 Brief Introduction

3. 2 Key Benets

3. 3 Applications

3. 4 System Components

3. 5 Display Components

3. 6 Frame

3. 7 Module

3. 8 Socket and Plug for Power and Data Connection

3. 9 Receveir Card

4 INSTALLATION

4. 1 Suspended Installation

4. 2 Setup Process of Standing Installation

4. 3 Data and power Cabling

5 TROUBLESHOOTING

5. 1 Module Problems

5. 2 Power Problems

5. 3 Data Transfer Problems

6 MAINTENANCE

Warranty

APIX6T

SAFETY

General instruction

• The products referred to in this manual conform to the European Community Directives and are there-

fore marked with .

• The unit is supplied with hazardous network voltage (230V~). Leave servicing to skilled personnel only.

Never make any modications on the unit not described in this instruction manual, otherwise you will

risk an electric shock.

• Connection must be made to a power supply system tted with ecient earthing (Class I appce ac-

cording to standard EN 60598-1). It is, moreover, recommended to protect the supply lines of the units

from indirect contact and/or shorting to earth by using appropriately sized residual current devices.

• The connection to the main network of electric distribution must be carried out by a qualied electrical

installer. Check that the main frequency and voltage correspond to those for which the unit is designed

as given on the electrical data label.

• This unit is not for home use, only professional applications.

• Never use the xture under the following conditions:

- in places subject to vibrations or bumps;

- in places with a temperature of over 40 °C.

• Make certain that no inammable liquids, water or metal objects enter the xture.

• Do not dismantle or modify the xture.

• All work must always be carried out by qualied technical personnel. Contact the nearest sales point for

an inspection or contact the manufacturer directly.

• If the unit is to be put out of operation denitively, take it to a local recycling

plant for a disposal which is not harmful to the environment.

Warnings and installation precautions

• If this device will be operated in any way dierent to the one described in this manual, it may suer damage

and the guarantee becomes void. Furthermore, any other operation may lead to dangers like short circuit,

burns, electric shock, etc.

• Always disconnect power from the mains, when device is not used or before cleaning!

• Before starting any maintenance work or cleaning the unit and when device is not used, cut o power from

the main supply.

• Don’t connect the device to a dimmer pack.

• Never let the power-cord come into contact with other cables! Handle the power-cord and all connections

with the mains with particular caution!

• Never remove warning or informative labels from the unit.

• Do not shake the device. Avoid brute force when installing or operating the device.

• Do not switch the device on and o in short intervals.

• Never use the device during thunderstorms, unplug the device immediately.

• Only operate the device after having familiarized with its functions.

• Make sure that the device is not exposed to extreme heat, moisture or dust.

• Keep any inammable material at a safe distance from the xture.

• Make sure that the power-cord is never crimped or damaged. Check the device and the power-cord from

time to time. If the external cable is damaged, it has to be replaced by a qualied technician.

• If device is dropped or struck, disconnect mains power supply immediately. Contact a qualied technical

personnel inspect for safety before operating.

WARNING! Before carrying out any operations with the unit, carefully read this instruction

manual and keep it with cure for future reference. It contains important information about

the installation, usage and maintenance of the unit.

APIX6T

• If the device has been exposed to drastic temperature uctuation (e.g. after transportation), do not switch it

on immediately. The arising condensation water might damage your device. Leave the device switched o

until it has reached room temperature.

• If your device fails to work properly, discontinue use immediately.

• For replacement use fuses of same type and rating only.

• This device is not designed for permanent operation. Consistent operation breaks will ensure that the device

will serve you for a long time without defects.

• When hanging the product, always use a safety cable. When carrying out any work, always comply scrupu-

lously with all the regulations (particularly regarding safety) currently in force in the country in which the

xture’s being used.

• Do not operate the product if you see damage on the housing, LEDs, or cables. In any of these cases, have the

damaged parts replaced by a qualied technician.

• The user is responsible for correct positioning and operating of the APIX6T. Music & Lights will not accept

liability for damages caused by the misuse or incorrect installation of this device..

GENERAL INFORMATION

Shipments and claims

The goods are sold “ex works” and always travel at the risk and danger of the distributor. Eventual damage will

have to be claimed to the freight forwarder. Any claim for broken packs will have to be forwarded within 8 days

from the reception of the goods.

Warranty and returns

The guarantee covers the xture in compce with existing regulations. You can nd the full version of the “Gen-

eral Guarantee Conditions” on our web site www.musiclights.it.

Please remember to register the piece of equipment soon after you purchase it, logging on www.musiclights.it

. The product can be also registered lling in and sending the form available on your guarantee certicate. For

all purposes, the validity of the guarantee is endorsed solely on presentation of the guarantee certicate. Music

& Lights will verify the validity of the claim through examination of the defect in relation to proper use and the

actual validity of the guarantee. Music & Lights will eventually provide replacement or repair of the products

declining, however, any obligation of compensation for direct or indirect damage resulting from faultiness.

APIX6T

- 1 - INTRODUCTION

1.1 DESCRIPTION

AlphaPIX6T is a LED module for the creation of ledscreens with 6,6 mm pixel pitch, ideal for video screen-

ing, pictures and backgrounds for medium viewing distances from ledwall surface.

The architecture of AlphaPIX6T is conceived with 640x720 mm module size, featuring 10368 SMD Full-

Color LEDs for an impressive light output (up to 5500 NIT, suitable for day-light environments).

The module design is completely made in aluminium and the IP65 protection rate on front side makes

AlphaPIX6T suitable also for temporary outdoor application.

The main structure is designed in aluminum, making AlphaPIX6T extremely lightweight, only 30 kg/m2,

allowing a wide exibility in conguration, also in hanging applications, with no limits of weight.

Applications

• In environments where the video-projection is not allowed by the high luminosity or short depth of

the room

• In TV Studios for multiple viewing angle

• Touring and Live event for Camera streaming

• Large trade-show booths with creative video imaging

• In theme parks or public events

Mechanical architecture

• Module dimensions (WxHxD): 640x720x100 mm

• Module weight: 13,5 kg

• Weight per square meter: 30 kg

• Internal protection: IP65/IP43

• Die-cast aluminium housing

• Mechanical nishing: black

• Seamless locking system

• Cooling: natural airow

• Vertical hanging system: built-in aliscaf clamp support

Electrical features

• Power supply: AC 110/230V 50/60Hz

• Power IN connections: Neutrik Powercon

• Max power consumption (module): 415W

• Average power consumption (module): 139W

• Max rated current/cabinet: AC 220V/1.88A

• Max power consumption (per square meter): 900W

• Average power consumption (per square meter): 300W

• Power output: Max 3 modules

• MTBF: > 1.000 h

• Working temperature/humidity: -20°C - +60°C / 10% - 90%

Video features

• LED source: high-power SMD2727 FullColor black face

• Module resolution: 96x108 pixel, 10’368 total pixel

• Pixel pitch: 6,6 mm

• LED density: 22’500 LED/sqm

• Luminous ux: 5’500 cd/sqm (NIT)

• Best viewing distance: 8 - 100 m

APIX6T

• LED life span: >100’000h

• Colours: >4,4 trilioni through RGB mixing

• Grayscale: 16 bit (16’384 level)

• Refresh rate: ≥ 1’920 Hz

• Colour calibration through PC software

• Input video signals: AV, S-Video, VGA, DVI, HDMI, SDI, DP

• Viewing angle: 140° horizontal, 70° vertical

• Dead pixel ratio: <0,002

Control system

• Dedicated G2 NOVASTAR interface (Sender box) for video signal distribution and screen conguration

(not included)

• Data IN sender box: USB connector

• Data IN module: RJ45 connectors

• Connection between screen and sender box: USB cable

• Connection between sender box and videowall: CAT5 data cable

APIX6T

Technical specication

LED Type High-power SMD2727 FullColor black face

Pixel Pitch 6.6 mm

Pixel Density 22’500 pixels/m2

Viewing Angle (H/V) 140°H/70°V

Brightness 5’500 nit

Color Depth 8192 bytes

Drive Mode 1/6 scan, constant current

Grey Level 16 bit

Refresh frequency ≥1920 Hz

Brightness Adjustment Manual/Auto/Programmable

Panel Dimension (WxH) 640×720×100 mm

Panel Resolution (WxH) 96×108 pixels

Module Resolution 48×36 pixels

Panel Weight 13.5 kg

Panel Type and Material Die-casting aluminum

Protection Grade IP65/IP43

Power Supply AC 110/230V 50/60Hz

Connectors Powercon Ethercon

Control Protocol Novastar

Hanging Panel Quantity ≤15 panels

Avg. Power Consumption 300 W/sqm

Max. Power Consumption 900 W/sqm

Operating Temp/Humidity -20°C-+50°C / 10%-90%

Compt Standard CE

720

100

640

APIX6T

2. INSTALLATION REQUIREMENTS

This chapter species the requirements for safety, mechanism, electricity and control software of APIX6T

LED display.

Warning: This LED indoor product is designed for outdoor. Both outdoor and indoor can be used.

2.1 Mechanical Requirements

Weight Warning: Do not underestimate the weight of a complete APIX6T LED display. Be sure that The

oor or truss installation on which the APIX6T display has to be installed is capable of Handling ve (5)

times the complete load of the display. For oor mounting, conclude the weight of any other load.

Caution: One APIX6T tile weighs approximately 13.5 kg.

Horizontal surface

For oor installation, the oor on which APIX6T display is installed must be horizontal. Never install LED

display on a slant surface.

Ballast

Depending on the height of the display and the position of the LED display upon the foot beams (some-

where between front and middle) additional weight (ballast)will be required.

Truss beam

The truss beam has to be provided and installed by the customer. Pay attention to following points for

installation design and preparation. Calculate precisely for on individual basis.

Weight tolerances:

Ensure that the truss beam and the ceiling against which the truss beam has to be installed is able to han-

dle the complete weight of the APIX6T LED display.

Ceiling stability.

Installation ambience

Environmental conditions: humidity, ventilation, temperature, etc.

Location: Altitude, etc.

Front clearances: for optimal eect, ensure that enough free space is supplied in front of the LED display

and respect the minimum viewing distance.

Comply with local regulations regarding such installations.

Warning: Suspending installation is limited to 15 tiles in vertical direction.

2.2 Electrical Requirements

Power requirements

The displaying area of one APIX6T tile is 0.460 m². APIX6T LED tiles have pixel densities (see Appendix A –

technical specications). For dierent pixel densities, one APIX6T tile may need power supply of 0.6 amps

to 1.5 amps at 220VAC, 100-250VAC, 50-60 Hz. Each APIX6T tile has one input and one output socket of AC

power. The power is distributed to display tiles by power split cables from power distributor. However, one

power split cable can be connected with 8 – 20 tiles in parallel. So, one power split cable has to be provid-

ed for every 8 – 20 tiles. Protect every power cable by a circuit breaker or fuses rated 16 A / 250 VAC (15 A /

110 VAC in the USA and Canada). PROLIGHTS provides a range of power distributor to satisfy the demands

of your LED display. See more details for power distributor of LED display in Power Distribution Section.

Contact PROLIGHTS for more information.

APIX6T

Power system

It is recommended to use power distribution system with a separate neutral and grounding

conductor to avoid large current loops due to voltage dierences in the neutral conductor.

•Protecttheelectricalinstallationbyswitch,circuitbreaker,over-voltageprotector,defectivegrounding

circuit breaker with proper rated power.

•Installthedisplayinaccordancewithlocalelectricalinstallationstandards.InEurope,complywith

EN 60364, the standard for electrical installation of buildings. In Germany, comply with EN 60364. In

America, comply with National Electrical Code ANSI/NFPA 70.

Protective grounding

To prevent against the risk of electric shock, the installation should be properly grounded. Defeating

the purpose of grounding will expose you to the risk of electric shock.

2.3 System Requirements

Before you begin, it is assumed that you are familiar with the Windows operating software. Windows

7 Ultimate is allowed to launch the relative control software.

System requirements

Minimum specications:

- Hardware

• PC PentiumIV 2.0 GHz or equivalent

• 1 GB RAM

• Free hard disk space: 10GB

• XGA resolution (1024 x 768)

• Serial communicationport

• Ethernet connection

- Software

• Windows7 Professional/ Ultimate

Recommended specications:

- Hardware

• PC Intel i5 processor or above

• 4GB RAM

• Free hard disk space: APIX6T GB

• SXGA resolution (1280 x 1024), with 512MB video memory

• Serial communication port

• Ethernet connection

- Software

• Windows 7 Professional

3. SYSTEM INTRODUCTION

3.1 Brief Introduction

APIX6T is the LED indoor display product of PROLIGHTS that uses die-casting aluminum frame

with CNC high precision machining techniques. With it‘s compact, light and handy exterior, the LED

tile is easy to install and disassemble. As the tile dimension is of very high precision, so the whole

display keeps in high atness and seamless.

Inhaltsverzeichnis

Andere ProLights DJ-Equipment Handbücher

ProLights

ProLights VORTEX VXBUBBLE Bedienungsanleitung

ProLights

ProLights SUNBLAST3500MAX Bedienungsanleitung

ProLights

ProLights LUMIPAR6UQ Bedienungsanleitung

ProLights

ProLights HZ660D Bedienungsanleitung

ProLights

ProLights SOLAR27Q Bedienungsanleitung

ProLights

ProLights TRIPLESCAN Bedienungsanleitung

ProLights

ProLights EclProfile CT+ Bedienungsanleitung

ProLights

ProLights ARCPOD27Q Bedienungsanleitung

ProLights

ProLights STARK1000 Bedienungsanleitung

ProLights

ProLights Mobiblast Bedienungsanleitung

ProLights

ProLights STARBALL Bedienungsanleitung

ProLights

ProLights PIXBAR4 Bedienungsanleitung

ProLights

ProLights EclFresnel JrVW Bedienungsanleitung

ProLights

ProLights jetbeam-2 Bedienungsanleitung

ProLights

ProLights MOSAICOXL Bedienungsanleitung

ProLights

ProLights ECLIPSE FRESNEL TU Bedienungsanleitung

ProLights

ProLights SMARTOWER Bedienungsanleitung

ProLights

ProLights LumiPix XB050 Bedienungsanleitung

ProLights

ProLights SMARTBATHEX Bedienungsanleitung

ProLights

ProLights TRUSSPOD3BAT Bedienungsanleitung

ProLights

ProLights LUMIPAR7VWPRO Bedienungsanleitung

ProLights

ProLights SUNBLAST3000FC Bedienungsanleitung

ProLights

ProLights ARCLED1107UV Bedienungsanleitung

ProLights

ProLights SUPERFLOWER DMX led Bedienungsanleitung

Beliebte DJ-Equipment Handbücher anderer Marken

ALPHA LITE

ALPHA LITE ALPHA 1500 Betriebsanleitung

Chauvet

Chauvet OVATION E-930VW Bedienungsanleitung

Zumtobel

Zumtobel APHRODITE Home Bedienungsanleitung

Snow Masters

Snow Masters Zig Oscillator Bedienungsanleitung

EuroLite

EuroLite 50530554 Bedienungsanleitung

Beamz

Beamz BUV243 Bedienungsanleitung

thomann

thomann Stairville DJ Lase 40-G MK-III Bedienungsanleitung

Eagletone

Eagletone 6 Eyes Flower Bedienungsanleitung

EuroLite

EuroLite FLD-1508 Bedienungsanleitung

Technical Pro

Technical Pro LG8xSEA Bedienungsanleitung

JB Systems

JB Systems Lounge Laser DMX Bedienungsanleitung

Lightmaxx

Lightmaxx Vega Halo 90 Bedienungsanleitung

Elation

Elation FUZE WASH Z350 Bedienungsanleitung

Maverick

Maverick MK3 WASH Bedienungsanleitung

Infinity

Infinity TF-260C7 Fresnel Bedienungsanleitung

Chauvet

Chauvet EVE E-50Z Bedienungsanleitung

Eliminator Lighting

Eliminator Lighting E 138 Bedienungsanleitung

EuroLite

EuroLite Mini Multicolor LED Flashing Light SC Bedienungsanleitung