ProLights RUBYFCX Bedienungsanleitung

USER MANUAL

MANUALE UTENTE

RUBYFCX

FULL COLOR LED BEAMLIGHT

EN - IT

reproduced in any form or by any means for any commercial use.

In order to improve the quality of products, Music&Lights S.r.l. reserves the right to modify the characteris-

tics stated in this instruction manual at any time and without prior notice.

All revisions and updates are available in the‘manuals’section on site www.musiclights.it

REV.002-09/18 FW: 1.0.05

RUBYFCX

Packing content

• RUBYFCX

• Power cable

• Mount bracket

• User manual

TABLE OF CONTENTS Safety

General instructions

Warnings and installation precautions

1 Introduction

1. 1 Description

1. 2 Technical specications

1. 3 Operating elements and connections

2 Installation

2. 1 Mounting

3 Functions and settings

3. 1 Operation

3. 2 Basic

3. 3 Menu structure

3. 4 Linking

3. 5 DMX addressing conguration

3. 6 DMX mode conguration

3. 7 DMX addressing

3. 8 Wireless settings control

3. 9 Ethernet

3. 10 RDM and ID

3. 11 Temperature

3. 12 Movement

3. 13 Screen

3. 14 Fixture

3. 15 Adjust

3. 16 Reset of the function

3. 17 Calibration

3. 18 Reload default

3. 19 Informaion of the device/3.20 Slave receive mode

3. 21 Operations in automatic mode/3. 22 Select chase

3. 23 Edit chase

3. 24 Edit scenes/3. 25 Scenes record mode

3. 26 Music mode

3. 27 Microphone sensitivity

3. 28 Connection of the DMX line

3. 29 Construction of the DMX termination

3. 30 DMX control

3. 31 Gobos wheel

4 Maintenance

4. 1 Maintenance and cleaning the unit

4. 2 Fuse replacement

4. 3 Trouble shooting

RUBYFCX

WARNING! Before carrying out any operations with the unit, carefully read this instruction

manual and keep it with cure for future reference. It contains important information about

the installation, usage and maintenance of the unit.

SAFETY

General instruction

• The products referred to in this manual conform to the European Community Directives and are there-

fore marked with .

• The unit is supplied with hazardous network voltage (230V~). Leave servicing to skilled personnel only.

Never make any modications on the unit not described in this instruction manual, otherwise you will

risk an electric shock.

• Connection must be made to a power supply system tted with ecient earthing (Class I appliance ac-

cording to standard EN 60598-1). It is, moreover, recommended to protect the supply lines of the units

from indirect contact and/or shorting to earth by using appropriately sized residual current devices.

• The connection to the main network of electric distribution must be carried out by a qualied electrical

installer. Check that the main frequency and voltage correspond to those for which the unit is designed

as given on the electrical data label.

• This unit is not for home use, only professional applications.

• Never use the xture under the following conditions:

- in places wet;

- in places subject to vibrations or bumps;

- in places with an ambient temperature of over 45°C.

• Make certain that no inammable liquids, water or metal objects enter the xture.

• Do not dismantle or modify the xture.

• All work must always be carried out by qualied technical personnel. Contact the nearest sales point for

an inspection or contact the manufacturer directly.

• If the unit is to be put out of operation denitively, take it to a local recycling

plant for a disposal which is not harmful to the environment.

Warnings and installation precautions

• If this device will be operated in any way dierent to the one described in this manual, it may suer

damage and the guarantee becomes void. Furthermore, any other operation may lead to dangers like

short circuit, burns, electric shock, etc.

• Before starting any maintenance work or cleaning the projector, cut o power from the main supply.

• Always additionally secure the projector with the safety rope.When carrying out any work, always com-

ply scrupulously with all the regulations (particularly regarding safety) currently in force in the country

in which the xture’s being used.

• For inside use only. Not designed for outside use.

• The minimum distance between the xture and surrounding walls must be more than 50 cm and the

air vents at the housing must not be covered in any case.

• Install the xture in a well ventilated place.

• Keep any inammable material at a safe distance from the xture.

• The maximum temperature that can be reached on the external surface of the tting, in a thermally

steady state, is high. After power o, please cool down over 15 minutes.

• Shields, lenses or ultraviolet screens shall be changed if they have become damaged to such an extent

that their eectiveness is impaired.

• The lamp (LED) shall be changed if it has become damaged or thermally deformed.

• Never look directly at the light beam. Please note that fast changes in lighting, e. g. ashing light, may

trigger epileptic seizures in photosensitive persons or persons with epilepsy.

RUBYFCX

- 1 - INTRODUCTION

1.1 DESCRIPTION

The Prolights RUBY FCX is a LED replacement for a discharge beam light, keeping a bright, tight, 2°

beam, and adding full color mixing through the high eciency RGB source.

RUBYFCX is packed with all features you would expect from a beam eect moving light, such as gobos,

8f circular and 6f linear prism, frost, and adding innite pan and tilt rotation becomes left out.

LIGHT SOURCE

• Source: 50W RGB LED

• Lux: 141929lux @3m Full

• Lux: 51094lux @5m Full

• Source Life Expectancy: >50.000 h

OPTICS

• Beam Angle: 2°

• Lens Diameter: 116mm

• Lens Type: HQ glass lens optics

• Focus: motorized

COLOR SYSTEM

• Color Mixing: RGB/FC

• CTC: CTC control through independent DMX channel

• White Presets: 2000 - 8000K

• Color Wheel: Virtual color wheel with presets

• Macros: Several pre-build pixel macros with adjustable speed

DYNAMIC EFFECTS

• Fixed gobos: 17 Fixed gobos+Open

• Circular Prism: 8f with bi-directional rotation, Indexing

• Linear Prism: 6f with bi-directional rotation, Indexing

• Frost: Frost unit to soften the beam edge

BODY

• Pan Angle: 540/630° with 360° continuous rotation

• Tilt Angle: 265° with 360° continuous rotation

• Pan/Tilt Resolution: 16 bit

• Feedback: Automatic repositioning after accidental movement

• Body: Sturdy die-cast aluminium body conceived for long-time durability

• Body Color: Black

CONTROL

• Protocols: DMX512, RDM, Art-Net

• DMX Channels: 18 / 20 / 22 / 23ch

• W-DMX: Included, Wireless Solution receiver

• RDM: RDM ready for xture remote monitor and settings

• Display: LCD high resolution color display with autoip

• Firmware Upgrade: Yes, via USB-DMX interface (UPBOX2) not included

• Hibernation: Power Safe Mode when lost DMX

• Master/Slave: for synchronized operation of more units linked in a chain

RUBYFCX

ELECTRONICS

• Dimmer: Linear 0~100% electronic dimmer

• Strobe/Shutter: 0 - 30 Hz, electronic

• Battery Backup: Battery backup for user operation without connecting to the main power

• Operating Temperature: 0° ~ +45°

• Flicker: Flicker free operation

ELECTRICAL

• Power Supply: 100-240V – 50/60Hz

• Power Consumption (at 230V): 122W

• Power Consumption (at 120V): 124W

PHYSICAL

• Cooling: Forced air with low noise fan

• Suspension And Fixing: Any position with“quick-lock”omega brackets

• Signal Connection: DMX 5p IN/OUT Amphenol, ARTNET IN/OUT

• Power Connection: Seetronic Powerkon True IP65 in/out

• IP: 20

• Dimensions (WxHxD): 294x471x200mm

• Weight: 12kg

294mm/11.57in

471mm/18.54in

266mm/10.47in

Technical drawing Fig.1

RUBYFCX

810 11

1.3 OPERATING ELEMENTS AND CONNECTIONS

1. MOVING HEAD

2. ROTARY ARM

3. HANDLE

4. LED INDICATOR "WDMX"

5. MICROPHONE

6. CONTROL PANEL with LCD

display and 6 button used

to access the control panel

functions and manage them.

7. EtherCON CONNECTORS IN/OUT

signal.

8. DMX OUT (5-pole XLR):

1 = ground, 2 = DMX-, 3 = DMX+,

4 N/C, 5 N/C.

9. DMX IN (5-pole XLR):

1 = ground, 2 = DMX-, 3 = DMX+,

4 N/C, 5 N/C.

10. POWER IN (PowerCON TRUE

IN): for connection to a socket

(100-240V~/50-60Hz) via the

supplied mains cable.

11. POWER OUT (PowerCON

TRUE OUT): power output for

connection of multiple units in

series.

12. MAIN FUSE HOLDER: replace

a burnt-out fuse by one of the

same type only.

View A

View B

Fig.2

RUBYFCX

- 2 - INSTALLATION

2.1 MOUNTING

The RUBYFCX may be set up on a solid and even surface. By means of the xing facilities of the baseplate,

the unit can also be mounted upside down to a cross arm. The base plate is shown in g.3. For xing, stable

mounting clips are required. According to the gure, the bolts of the brackets are placed into the openings

provided in the base plate and turned clockwise until they lock (to the stop). Always ensure that the unit

is rmly xed to avoid vibration and slipping while operating. The mounting place must be of sucient

stability and be able to support a weight of 10 times of the unit’s weight. When carrying out any installa-

tion, always comply scrupulously with all the regulations (particularly regarding safety) currently in force

in the country in which the xture’s being used. Always additionally secure the projector with the safety

rope from falling down. For this purpose, fasten the safety rope at a suitable position so that the maximum

fall of the projector will be 20 cm.

Fig.3

CLAMP

SAFETY

CABLE

OMEGA

RUBYFCX

- 3 - FUNCTIONS AND SETTINGS

3.1 OPERATION

Connect the supplied main cable to a socket (100-240V~/50-60Hz). The unit will run built-in program to

reset all motors to their home position. Shortly after that the RUBYFCX is ready for operation.To switch o,

disconnect the mains plug from the socket. For a more convenient operation it is recommended to con-

nect the unit to a socket which can be switched on and o via light switch.

3.2 BASIC

The control panel of RUBYFCX has a display and 6 buttons for the complete programming and manage-

ment of the projector menu (g.4).

Fig.4 - Functions of the buttons and display icons

UP DOWN LEFT RIGHT ENTER BATTERY

Increases the value

displayed or passes

to the previous item

in a menu

Decreases the value

displayed or passes

to the next item in

the menu

Return to the top

level

Commute from

units, tens, hundred

in the menu

Conrms the

displayed value,

or activates the

displayed function,

or enters the

successive menu

Used to activate the

backup battery. It

allows to switching

display interface

without main power

W-DMX

ETHERNET MIC BATTERY

RUBYFCX

3.3 MENU STRUCTURE

1CONNECT ðAddress ðDMX

W-DMX

Artnet

DMX Mode ðMode ðStandard(Standard)

Extended

Basic

User

Bas 16bit

ðEdit User Max Channel = XX

PAN = CH01

Wireless ðDMX Out ðON/OFF

Reset Connect ðNO/YES

Ethernet ðDMX Out ðON/OFF

IP Address ðxxx

IP Mask ðxxx

Universe ðxxx

ðRDM ID ðName

Mode ðMode1/Mode2

-Password-

PID Code

2SET UP ðTemperature ðTemperature. C/F ðFahrenheit /Celsius

Max Temperature 60~139°C/140~282°F

ðMovement ðPan Reverse ðNO/YES

Tilt Reverse ðNO/YES

Pan Degree ð630/540

Feedback ðNO/YES

Pan/Tilt Mode ðStand/Smooth

Screen ðBacklight ð01~99m/alwais on

Flip Display ðNO/YES/AUTO

Key Lock ðON/OFF

Language ðEn/Fr/Sp

Fixture ðFans Mode ðAuto Speed/High Speed

No Signal ðClose/Hold/Auto/Music

Hibernation ðDisable/Min(1~99

Theatre Mode ðNO/YES

Adjust ðPAN…

Inhaltsverzeichnis

Sprachen:

Andere ProLights DJ-Equipment Handbücher

ProLights

ProLights LEDPINSPOT Bedienungsanleitung

ProLights

ProLights LEDPAR64363RGB Bedienungsanleitung

ProLights

ProLights Eclipse FC Bedienungsanleitung

ProLights

ProLights Z8STRIP Bedienungsanleitung

ProLights

ProLights PANORAMAIPWBX Bedienungsanleitung

ProLights

ProLights Mobiblast Bedienungsanleitung

ProLights

ProLights STARK1000 Bedienungsanleitung

ProLights

ProLights BEAMROLL8Q Bedienungsanleitung

ProLights

ProLights BEAMSPOT10 Bedienungsanleitung

ProLights

ProLights SmartBat Wash Bedienungsanleitung

ProLights

ProLights ARCLED7307HD Bedienungsanleitung

ProLights

ProLights CROMOSPOT500 Bedienungsanleitung

ProLights

ProLights ARIA 700SPOT Bedienungsanleitung

ProLights

ProLights STUDIOCOBFC Bedienungsanleitung

ProLights

ProLights LUMIPAR12HPRO Bedienungsanleitung

ProLights

ProLights GALLERYCLIPSETU Bedienungsanleitung

ProLights

ProLights 6BEAMQ Bedienungsanleitung

ProLights

ProLights LUMIPIX 12QIP Bedienungsanleitung

ProLights

ProLights SUNRISE2 Bedienungsanleitung

ProLights

ProLights PANORAMAIPSPOT Bedienungsanleitung

ProLights

ProLights VX1300SNOW Bedienungsanleitung

ProLights

ProLights LUMIPAR12UQ Bedienungsanleitung

ProLights

ProLights Chromatrix Bedienungsanleitung

ProLights

ProLights MINIECLIPSE Series Bedienungsanleitung

Beliebte DJ-Equipment Handbücher anderer Marken

ALPHA LITE

ALPHA LITE ALPHA 1500 Betriebsanleitung

Chauvet

Chauvet OVATION E-930VW Bedienungsanleitung

Zumtobel

Zumtobel APHRODITE Home Bedienungsanleitung

Snow Masters

Snow Masters Zig Oscillator Bedienungsanleitung

EuroLite

EuroLite 50530554 Bedienungsanleitung

Beamz

Beamz BUV243 Bedienungsanleitung

thomann

thomann Stairville DJ Lase 40-G MK-III Bedienungsanleitung

Eagletone

Eagletone 6 Eyes Flower Bedienungsanleitung

EuroLite

EuroLite FLD-1508 Bedienungsanleitung

Technical Pro

Technical Pro LG8xSEA Bedienungsanleitung

JB Systems

JB Systems Lounge Laser DMX Bedienungsanleitung

Lightmaxx

Lightmaxx Vega Halo 90 Bedienungsanleitung

Elation

Elation FUZE WASH Z350 Bedienungsanleitung

Maverick

Maverick MK3 WASH Bedienungsanleitung

Infinity

Infinity TF-260C7 Fresnel Bedienungsanleitung

Chauvet

Chauvet EVE E-50Z Bedienungsanleitung

Eliminator Lighting

Eliminator Lighting E 138 Bedienungsanleitung

EuroLite

EuroLite Mini Multicolor LED Flashing Light SC Bedienungsanleitung