ProLights ArcShine S9-18FC Bedienungsanleitung

USER MANUAL

English version

REV.02-01/23

ArcShine S9-18FC

ArcShine S9-18VW

9/18x2W IP66 RGB + Warm White architectural linear xture, 50/100 cm

9/18x2W IP66 Variable White architectural linear bar, 50/100 cm

Thank you for choosing PROLIGHTS

Please note that every PROLIGHTS product has been designed in Italy to meet quality and performance requirements

for professionals and designed and manufactured for the use and application as shown in this document.

Any other use, if not expressly indicated, could compromise the good condition/operation of the product and/or be

a source of danger.

This product is meant for professional use. Therefore, commercial use of this equipment is subject to the respectively

applicable national accident prevention rules and regulations.

Features, specications and appearance are subject to change without notice. Music & Lights S.r.l. and all afliated

companies disclaim liability for any injury, damage, direct or indirect loss, consequential or economic loss or any other

loss occasioned by the use of, inability to use or reliance on the information contained in this document.

Product user manual can be downloaded from the website www.prolights.it , or can be inquired to the ofcial

PROLIGHTS distributors of your territory (https://www.prolights.it/sales_network.html).

Scanning the below QR Code, you will access the download area of the product page, where you can nd a broad

set of always updated technical documentation: specications, user manual, technical drawings, photometrics,

personalities, xture rmware updates.

The PROLIGHTS Logo, PROLIGHTS names and all other trademark in this document pertaining to PROLIGHTS services

or PROLIGHTS product are trademarks OWNED or licensed by Music & Lights S.r.l., its afliates, and subsidiaries.

04026 - Minturno (LT) ITALY.

Visit the download area

of the product page

ARCSHINES9FC

ARCSHINES18FC

ARCSHINES9VW

ARCSHINES18VW

PROLIGHTS - ArcShine S series 01

INDEX

SAFETY INFORMATION 02

1 - PACKAGING 05

PACKAGE CONTENT..................................................................................................... 05

OPTIONAL ACCESSORIES............................................................................................. 05

2 - TECHNICAL DRAWING 06

3 - INSTALLATION 07

MOUNTING.................................................................................................................... 07

4 - PRODUCT OVERVIEW 08

5 - CONNECTION TO THE MAINS SUPPLY 09

6 - DMX CONNECTION 10

CONNECTION OF THE CONTROL SIGNAL: DMX LINE .............................................. 10

INSTRUCTIONS FOR A RELIABLE DMX CONNECTION ............................................... 10

CONNECTION DAISY CHAIN OF THE DMX LINE ........................................................ 10

CONSTRUCTION OF THE DMX TERMINATION ........................................................... 11

DMX ADDRESSING ........................................................................................................ 11

7 - RDM FUNCTIONS 12

8 - OPERATION VIA DATAMASTER 14

RDM SETTING................................................................................................................ 14

STAND ALONE FUNCTION ........................................................................................... 14

9 - MENU STRUCTURE 15

10 - DMX CHARTS 19

RDM Personality ID List .................................................................................................. 19

FC Variant - DMX Chart Summary .................................................................................. 19

RDM Model ID................................................................................................................ 19

Product Variant ............................................................................................................... 19

ID .................................................................................................................................... 19

VW Variant - DMX Chart Summary ................................................................................. 23

11 - ACCESSORIES INSTALLATION 25

LIGHT DIFFUSION FILTER (ARCSS18FILTER20/40/60/1060/3060, ARCSS9FI

TER20/40/60/1060/3060 - OPTIONAL).......................................................................... 25

BARNDOOR (ARCS18FIXBD, ARCS9FIXBD - OPTIONAL)............................................. 26

12 - MAINTENANCE 27

MAINTENANCE AND CLEANING THE PRODUCT........................................................ 27

VISUAL CHECK OF PRODUCT HOUSING ..................................................................... 27

TROUBLESHOOTING..................................................................................................... 28

PROLIGHTS - ArcShine S series02

SAFETY INFORMATION

WARNING!

• See https://www.prolights.it/product/ARCSHINES18FC#download for installation in-

structions.

• Please read carefully the instruction reported in this section before installing, powering,

operating or servicing the product and observe the indications also for its future handling.

This unit is not for household and residential use, only professional applications.

Connection to mains supply

• The Connection to the mains supply must be carried out by a qualied electrical

installer.

• Use only AC supplies 100-240V 50-60 Hz, the xture must be electrically connected

to ground (earth).

• Select the cable cross section in according with the maximum current draw of the

product and the possible number of products connected at the same power line.

• The AC mains power distribution circuit must be equipped with magnetic+residual

current circuit breaker protection.

• Do not connect it to a dimmer system; doing so may damage the product.

Protection and Warning against electrical shock

• Do not remove any cover from the product, always disconnect the product from AC

power before servicing.

• Ensure that the xture is electrically connected to ground (earth). And use only a

source of AC power that complies with local building and electrical codes and has

both overload and ground-fault (earth-fault) protection.

• Before using the xture, check that all power distribution equipment and cables are

in perfect condition and rated for the current requirements of all connected devices.

• Isolate the xture from power immediately if the power plug or any seal, cover, cable, or

other components are damaged, defective, deformed or showing signs of overheating.

• Do not reapply power until repairs have been completed.

• Refer any service operation not described in this manual to PROLIGHTS Service team

or an authorized PROLIGHTS service center.

Installation

• Make sure that all visible parts of the product are in good visible condition before its

use or installation.

• Make sure the point of anchorage is stable before positioning the projector.

• When suspending the xture above ground level, secure it against failure of primary

attachments by attaching a safety cable that is approved as a safety attachment for

the weight of the xture to the attachment point on the main frame of the product. ln

case the safety cable, enter in action, it needs to be replaced with a new one.

• Install the product only in well ventilated places.

• For non temporary installations, ensure that the xture is securely fastened to a load-

bearing surface with suitable corrosionresistant hardware.

• For a temporary installation with clamps, ensure that the quarter-turn fastener and/or

screws are turned fully, and secured with a suitable safety cable.

0,5 m Minimum distance of illuminated objects

• The projector needs to be positioned so that the objects hit by the beam of light are

at least 0.5 meters (1.64 ft) from the lens of the projector.

PROLIGHTS - ArcShine S series 03

T 45°C

Max operating ambient temperature (Ta)

• Do not operate the xture if the ambient temperature (Ta) exceeds 45 °C (113 °F).

-20°

Minimum operating ambient temperature (Ta)

• Do not operate the xture if the ambient temperature (Ta) is below -20 °C (-4 °F).

Protection from burns and re

• The exterior of the xture becomes hot during use. Avoid contact by persons and

materials.

• Ensure that there is free and unobstructed airow around the xture.

• Keep ammable materials well away from the xture.

• Do not expose the front glass to sunlight or any other strong light source from any an-

gle. Lenses can focus the sun’s rays inside the xture, creating a potential re hazard.

• Do not attempt to bypass thermostatic switches or fuses.

IP66

Permanent Outdoor use

• This product is rated with an IP (Ingress protection) for permanent outdoor use when

used and serviced according to the instruction contained in this document.

• Never use the xture in places subject to vibrations or bumps.

• Make certain that no inammable liquids, water or metal objects enter the xture.

• Excessive dust, smoke uid, and particle build up degrades performance, causes

overheating and will damage the xture.

• Damages caused by inadequate cleaning or maintenance are not covered by the

product warranty.

60°

Temperature of the external surface

• The surface of the xture can reach up to 60 °C (140 °F) during operation. Avoid

contact with people and materials.

Maintenance

• Warning! Disconnect the xture from AC mains power and allow to cool for at least

10 minutes before handling.

• Only technicians who are authorized by PROLIGHTS or Authorised service partners

are permitted to open the xture.

• Users may carry out external cleaning, following the warnings and instructions pro-

vided, but any service operation not described in this manual must be referred to a

qualied service technician.

• Important! Excessive dust, smoke uid, and particle build up degrades performance,

causes overheating and will damage the xture. Damages caused by inadequate

cleaning or maintenance is not covered by the product warranty.

Photobiological safety

• This device emits potentially dangerous optical radiation and is identied in the cat-

egory of Risk Group 0 according to EN 62471.

Do not stare at the operating light source

• Do not look directly at the LED source during operation. It can be harmful to the eyes

and skin.

• During Installation, operation and maintenance, be prepared for the xture to light

and move suddenly when connected to power.

Disposal

• This product is supplied in compliance with European Directive 2012/19/EU – Waste

Electrical and Electronic Equipment. (WEEE). To preserve the environment please

dispose/ recycle this product at the end of its life according to the local regulation.

PROLIGHTS - ArcShine S series04

The products to which this manual refers comply with:

• 2014/35/EU - Safety of electrical equipment supplied at low voltage (LVD);

• 2014/30/EU - Electromagnetic Compatibility (EMC);

• 2011/65/EU - Restriction of the use of certain hazardous substances (RoHS);

• 2014/53/EU - Radio Equipment Directive (RED).

The products to which this manual refers comply with:

• UL 1573 + CSA C22.2 No. 166 - Stage and Studio Luminaires and Connector Strips.

• UL 1012 + CSA C22.2 No. 107.1 - Standard for power units other than class 2.

FCC Compliance:

• This device complies with Part 15 of the FCC Rules. Operation is subject to the fol-

lowing two conditions:

1. This device may not cause harmful interference, and

2. This device must accept any interference received, including interference that may

cause undesired operation.

Other approvals

PROLIGHTS - ArcShine S series 05

1 - PACKAGING

PACKAGE CONTENT

• 1x ARCSHINES9FC / ARCSHINES18FC / ARCSHINES9VW / ARCSHINES18VW

• 1x BARE END - IP connection adapter

• 1x 5p XLR - IP connection male adapter

• 1x 5p XLR - IP connection female adapter

• User Manual

OPTIONAL ACCESSORIES

• AWEXAC2L03: extension IP67 power cable, IPpowercon-F -> IPpowercon-M, 3m.

• AWEXAC2L05: extension IP67 power cable, IPpowercon-F -> IPpowercon-M, 5m.

• AWEXAC2L10: extension IP67 power cable, IPpowercon-F -> IPpowercon-M, 10m.

• AWEXAC2L20: extension IP67 power cable, IPpowercon-F -> IPpowercon-M, 20m.

• AWEXDC2L03: extension IP67 signal cable, IPdataCON-F -> IPdataCON-M, 3m.

• AWEXDC2L05: extension IP67 signal cable, IPdataCON-F -> IPdataCON-M, 5m.

• AWEXDC2L10: extension IP67 signal cable, IPdataCON-F -> IPdataCON-M, 10m.

• AWEXDC2L20: extension IP67 signal cable, IPdataCON-F -> IPdataCON-M, 20m.

• ARCS9FIXBD: barndoor to adjust the light beam for ARCSHINES9 and ARCSHINEM9.

• ARCS18FIXBD: barndoor to adjust the light beam for ARCSHINES18 and ARCSHINEM18.

• ARCSS9FILTER20: light diffusion lter for ARCSHINES9, 20°.

• ARCSS9FILTER40: light diffusion lter for ARCSHINES9, 40°.

• ARCSS9FILTER60: light diffusion lter for ARCSHINES9, 60°.

• ARCSS9FILTER1060: light diffusion lter for ARCSHINES9, 10°x60°.

• ARCSS9FILTER3060: light diffusion lter for ARCSHINES9, 30°x60°.

• ARCSS18FILTER20: light diffusion lter for ARCSHINES18, 20°.

• ARCSS18FILTER40: light diffusion lter for ARCSHINES18, 40°.

• ARCSS18FILTER60: light diffusion lter for ARCSHINES18, 60°.

• ARCSS18FILTER1060: light diffusion lter for ARCSHINES18, 10°x60°.

• ARCSS18FILTER3060: light diffusion lter for ARCSHINES18, 30°x60°.

• ARCSSM9OUTERCASE: outercase box for ground installation for ARCSHINES9 and ARCSHINEM9 series.

• ARCSSM18OUTERCASE: outercase box for ground installation for ARCSHINES18 and ARCSHINEM18 series.

• UPBOX1UP5: rmware uploader kit, USB IN, 5pin XLR DMX OUT, USB OUT.

PROLIGHTS - ArcShine S series06

2 - TECHNICAL DRAWING

500 mm

[19.7 in]

87 mm

[3.4 in]

87 mm

[3.4 in]

65 mm

[2.6 in]

65 mm

[2.6 in]

88 mm

[3.5 in]

ARCSHINES9 weight: 1.95 kg - 4.29 lbs

65 mm

[2.6 in]

74 mm

[2.9 in]

1000 mm

[39.4 in]

87 mm

[3.4 in]

65 mm

[2.6 in]

48 mm

[1.9 in]

ARCSHINES18 weight: 3.5 kg - 7.71 lbs

155 mm

[6.1 in]

601 mm

[23.7 in]

121 mm

[4.8 in]

ARCSSM9OUTERCASE weight: 5 kg - 11,02 lbs

155 mm

[6.1 in]

1101 mm

[43.3 in]

121 mm

[4.8 in]

ARCSSM18OUTERCASE weight: 10 kg - 22,04 lbs

Fig. 01

PROLIGHTS - ArcShine S series 07

43 mm

[1.7 in]

6 mm

[0.2 in]

50 mm

[2.0 in]

20 mm

[0.8 in]

20 mm

[0.8 in]

26 mm

[1.0 in]

43 mm

[1.7 in]

6 mm

[0.2 in]

50 mm

[2.0 in]

20 mm

[0.8 in]

20 mm

[0.8 in]

26 mm

[1.0 in]

3 - INSTALLATION

MOUNTING

Check that the supporting structure can safely bear the weight of all installed xtures, clamps, cables,

auxiliary equipment, etc. and complies with locally applicable regulations.

When suspending the xture above ground level, secure it against failure of primary attachments by

attaching a safety wire that is approved as a safety attachment for the weight of the xture to an anchor

point on the product main frame.

Do not use removable parts or weak anchors for secondary attachment.

Warning! When clamping the xture to a truss or other structure at any angle, use clamps of half-cou-

pler type. Do not use any type of clamp that does not completely encircle the structure when fastened.

Fig.02

TILT angle: manual 180°

Screws for unlock and lock

the TILT (on both sides)

PROLIGHTS - ArcShine S series08

5 6 57

1 2 3 4

4 - PRODUCT OVERVIEW

1. POWER IN: for connection to the Mains 100-240V~/50-60Hz.

2. DMX IN (5-p XLR): 1 = GND, 2 = sign-, 3 = sign+, 4 N/C, 5 N/C.

3. DMX OUT (5-p XLR): 1 = GND, 2 = sign-, 3 = sign+, 4 N/C, 5 N/C.

4. POWER OUT: power output for connection of multiple units in series.

5. BRACKET for fastening.

6. GORE VALVE;

7. SAFETY EYE to attach safety cable.

Fig. 03

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere ProLights Beleuchtungsausrüstung Handbücher

ProLights

ProLights DIAMOND19TW Bedienungsanleitung

ProLights

ProLights EclFresnel TW Bedienungsanleitung

ProLights

ProLights BEAMROLL8W Bedienungsanleitung

ProLights

ProLights ARCLED2033 Bedienungsanleitung

ProLights

ProLights Cyber24 Bedienungsanleitung

ProLights

ProLights EclNanoPanel TWC Bedienungsanleitung

ProLights

ProLights EclFresnel 2KTU-DY Bedienungsanleitung

ProLights

ProLights DIAMOND31 Bedienungsanleitung

ProLights

ProLights Astra Profile400 Bedienungsanleitung

ProLights

ProLights EVO90F Bedienungsanleitung

ProLights

ProLights ARCLED5118 Bedienungsanleitung

ProLights

ProLights ArcPod 48Q Bedienungsanleitung

ProLights

ProLights LUMIPAR7IRTRI Bedienungsanleitung

ProLights

ProLights V200SPOT Bedienungsanleitung

ProLights

ProLights Astra Wash19Pix Bedienungsanleitung

ProLights

ProLights EclMini CC Bedienungsanleitung

ProLights

ProLights EclSoft Tube100 Bedienungsanleitung

ProLights

ProLights FS75LED Bedienungsanleitung

ProLights

ProLights LUMIPIX6TRI Bedienungsanleitung

ProLights

ProLights EclPanel TWC Bedienungsanleitung

ProLights

ProLights Reflex Bedienungsanleitung

ProLights

ProLights UNICO Bedienungsanleitung

ProLights

ProLights FURY FY250W Bedienungsanleitung

ProLights

ProLights ArcPod 27VW Bedienungsanleitung

Beliebte Beleuchtungsausrüstung Handbücher anderer Marken

Brizo

Brizo 8SP-MU-4 Bedienungsanleitung

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 Bedienungsanleitung

IKEA

IKEA BJÖRKSPIREA Bedienungsanleitung

Laserworld

Laserworld Evolution Series ES-400RGB Bedienungsanleitung

Alien

Alien RG STAR Bedienungsanleitung

EuroLite

EuroLite LED B-40 Bedienungsanleitung

Qazqa

Qazqa Suplux SL 3 Black 103062 Bedienungsanleitung

Commercial Electric

Commercial Electric 54568141 Bedienungsanleitung

CREE LIGHTING

CREE LIGHTING 304 Series Bedienungsanleitung

Goobay

Goobay 49867 Bedienungsanleitung

ECOMAN ITALIA

ECOMAN ITALIA LED T8 Bedienungsanleitung

Alkalite

Alkalite Krypton KT-81 Bedienungsanleitung

Clas Ohlson

Clas Ohlson GU10 Bedienungsanleitung

DTS

DTS DELTA 10 F Bedienungsanleitung

ring

ring Solar Steplight Bedienungsanleitung

One Stop Gardens

One Stop Gardens 57696 Montageanleitung

Chauvet DJ

Chauvet DJ COREpar UV120 ILS Bedienungsanleitung

SIREM

SIREM Swimeo A2 Bedienungsanleitung