ProLights EclFresnel TW Bedienungsanleitung

USER MANUAL

REV.02-05/21 English version

EclFresnel TW

EclFresnel PTW

LED Fresnel FC and Tunable White

with colour correction, to replace

1.000W lamp

Thank you for choosing PROLIGHTS

Please note that every PROLIGHTS product has been designed in Italy to meet quality and performance requirements

for professionals and designed and manufactured for the use and application as shown in this document.

Any other use, if not expressly indicated, could compromise the good condition/operation of the product and/or be

a source of danger.

This product is meant for professional use. Therefore, commercial use of this equipment is subject to the respectively

applicable national accident prevention rules and regulations.

Features, specications and appearance are subject to change without notice. Music & Lights S.r.l. and all afliated

companies disclaim liability for any injury, damage, direct or indirect loss, consequential or economic loss or any other

loss occasioned by the use of, inability to use or reliance on the information contained in this document.

Product user manual can be downloaded from the website www.prolights.it , or can be inquired to the ofcial

PROLIGHTS distributors of your territory (https://www.prolights.it/sales_network.html).

Scanning the below QR Code, you will access the download area of the product page, where you can nd a broad

set of always updated technical documentation: specications, user manual, technical drawings, photometrics,

personalities, xture rmware updates.

Visit the download area

of the product page

The PROLIGHTS Logo, PROLIGHTS names and all other trademark in this document pertaining to PROLIGHTS services

or PROLIGHTS product are trademarks OWNED or licensed by Music & Lights S.r.l., its afliates, and subsidiaries.

04026 - Minturno (LT) ITALY.

PROLIGHTS - EclFresnel TW / PTW 01

INDEX

SAFETY INFORMATION 02

1 - PACKAGING 05

PACKAGE CONTENT..................................................................................................... 05

OPTIONAL ACCESSORIES............................................................................................. 05

2 - TECHNICAL DRAWING 06

3 - INSTALLATION 08

MOUNTING.................................................................................................................... 08

4 - CONNECTION TO THE MAINS SUPPLY 09

5 - START UP 09

CONNECT AND DISCONNECT POWER FROM THE PRODUCT.................................. 09

6 - PRODUCT OVERVIEW 10

7 - DMX CONNECTION 11

CONNECTION OF THE CONTROL SIGNAL: DMX LINE .............................................. 11

INSTRUCTIONS FOR A RELIABLE DMX CONNECTION ............................................... 11

CONNECTION DAISY CHAIN........................................................................................ 11

CONNECTION OF THE DMX LINE................................................................................ 11

CONSTRUCTION OF THE DMX TERMINATION ........................................................... 12

DMX ADDRESSING ........................................................................................................ 12

8 - CONTROL PANEL 13

DISPLAY AND BUTTONS LAYOUT................................................................................. 13

9 - MENU STRUCTURE 14

10 - RDM FUNCTIONS 17

11 - DMX CHARTS 18

12 - ACCESSORIES INSTALLATION 22

FILTER FRAME (CODE ECLFRSTPG - OPTIONAL) ......................................................... 22

BARN DOOR (CODE ECLFRSBD - OPTIONAL) ............................................................. 23

NARROW ANGLE LENS (CODE ECLFRSNL - OPTIONAL) ............................................ 24

13 - MAINTENANCE 25

MAINTENANCE AND CLEANING THE PRODUCT........................................................ 25

REPLACING THE FUSE................................................................................................... 25

VISUAL CHECK OF PRODUCT HOUSING ..................................................................... 25

TROUBLESHOOTING..................................................................................................... 26

PROLIGHTS - EclFresnel TW / PTW02

SAFETY INFORMATION

WARNING!

• Please read carefully the instruction reported in this section before installing, power-

ing, operating or servicing the product and observe the indications also for its future

handling.

This unit is not for household use, only professional applications.

Connection to mains supply

• The Connection to the mains supply must be carried out by a qualied electrical

installer.

• Use only AC supplies 100-240V 50-60 Hz, the xture must be electrically connected

to ground (earth).

• Select the cable cross section in according with the maximum current draw of the

product and the possible number of products connected at the same power line.

• The AC mains power distribution circuit must be equipped with magnetic+residual

current circuit breaker protection.

• Do not connect it to a dimmer system; doing so may damage the product.

Protection and Warning against electrical shock

• Do not remove any cover from the product, always disconnect the product from AC

power before servicing.

• Ensure that the xture is electrically connected to ground (earth). And use only a

source of AC power that complies with local building and electrical codes and has

both overload and ground-fault (earth-fault) protection.

• Before using the xture, check that all power distribution equipment and cables are

in perfect condition and rated for the current requirements of all connected devices.

• Isolate the xture from power immediately if the power plug or any seal, cover, ca-

ble, or other components are damaged, defective, deformed or showing signs of

overheating.

• Do not reapply power until repairs have been completed.

• Refer any service operation not described in this manual to PROLIGHTS Service team

or an authorized PROLIGHTS service center.

Installation

• Make sure that all visible parts of the product are in good visible condition before its

use or installation.

• Make sure the point of anchorage is stable before positioning the projector.

• When suspending the xture above ground level, secure it against failure of primary

attachments by attaching a safety cable that is approved as a safety attachment for

the weight of the xture to the attachment point on the main frame of the product. ln

case the safety cable, enter in action, it needs to be replaced with a new one.

• Install the product only in well ventilated places.

• For non temporary installations, ensure that the xture is securely fastened to a load-

bearing surface with suitable corrosionresistant hardware.

• For a temporary installation with clamps, ensure that the quarter-turn fastener and/or

screws are turned fully, and secured with a suitable safety cable.

0,5 m Minimum distance of illuminated objects

• The projector needs to be positioned so that the objects hit by the beam of light are

at least 0.5 meters (1.64 ft) from the lens of the projector.

PROLIGHTS - EclFresnel TW / PTW 03

45°

aMax operating ambient temperature (Ta)

• Do not operate the xture if the ambient temperature (Ta) exceeds 45 °C (113 °F).

-10°

Minimum operating ambient temperature (Ta)

• Do not operate the xture if the ambient temperature (Ta) is below -10 °C (14 °F).

Protection from burns and re

• The exterior of the xture becomes hot during use. Avoid contact by persons and

materials.

• Ensure that there is free and unobstructed airow around the xture.

• Keep ammable materials well away from the xture

• Do not expose the front glass to sunlight or any other strong light source from any an-

gle. Lenses can focus the sun’s rays inside the xture, creating a potential re hazard.

• Do not attempt to bypass thermostatic switches or fuses.

Indoor use

• This product is designed for indoor and dry environments.

• Do not use in wet location and do not expose the xture to rain or moisture.

• Never use the xture in places subject to vibrations or bumps.

• Make certain that no inammable liquids, water or metal objects enter the xture.

• Excessive dust, smoke uid, and particle build up degrades performance, causes

overheating and will damage the xture.

• Damages caused by inadequate cleaning or maintenance are not covered by the

product warranty.

60°

Temperature of the external surface

• The surface of the xture can reach up to 60 °C (140 °F) during operation. Avoid

contact with people and materials.

Maintenance

• Warning! Disconnect the xture from AC mains power and allow to cool for at least

10 minutes before handling.

• Only technicians who are authorized by PROLIGHTS or Authorised service partners

are permitted to open the xture.

• Users may carry out external cleaning, following the warnings and instructions pro-

vided, but any service operation not described in this manual must be referred to a

qualied service technician.

• Important! Excessive dust, smoke uid, and particle build up degrades performance,

causes overheating and will damage the xture. Damages caused by inadequate

cleaning or maintenance is not covered by the product warranty.

Photobiological safety

• This device emits potentially dangerous optical radiation and is identied in the cat-

egory of Risk Group 0 according to EN 62471.

Do not stare at the operating light source

• Do not look directly at the LED source during operation. It can be harmful to the eyes

and skin.

• During Installation, operation and maintenance, be prepared for the xture to light

and move suddenly when connected to power.

PROLIGHTS - EclFresnel TW / PTW04

Disposal

• This product is supplied in compliance with European Directive 2012/19/EU – Waste

Electrical and Electronic Equipment

• (WEEE). To preserve the environment please dispose/ recycle this product at the end

of its life according to the local regulation.

The products to which this manual refers comply with:

• 2014/35/EU - Safety of electrical equipment supplied at low voltage (LVD).

• 2014/30/EU - Electromagnetic Compatibility (EMC).

• 2011/65/EU - Restriction of the use of certain hazardous substances (RoHS).

PROLIGHTS - EclFresnel TW / PTW 05

1 - PACKAGING

PACKAGE CONTENT

• 1x ECLFRESNELTW / PTW;

• 1x 1,5 meters power cable (SCHUKO plug - NEUTRIK POWERCON TRUE1 IP65);

• 1x ECLFRSPG: spigot for PROLIGHTS Fresnel series;

• 1x ECLFRSBD: barn door with 8 directional aps to adjust the light beam;

• 1x ECLFRSTPG: lter frame for ECLFRESNEL series;

• User Manual.

OPTIONAL ACCESSORIES

• TOUR53415L03: dmx cable HC5340. CANC5MXX XLR 5p->CANC5FXX XLR (f) 5p, L.3m;

• 958225L03: 3x2.5mm TH07 Cable, 16A 3p PwCon MXW, 16A 3p PwCon FXW, L. 3m;

• 9513FXWL03: ass. 3x2.5mm TH07 cable, 16A 3p 230V CEE plug, MENAC3FXW socket, L.5 m;

• 9533FXWL03: ass. 3x2.5mm TH07 cable, SCHUKO plug, MENAC3FXW socket, L.3m;

• RSR0630A/B: steel security cable for hanging bodies, inox steel shackle, L=60 cm, silver/black;

• C6002: slim aluminium clamp, 200 kg loading, 48-51 mm tubes, M10 bolt;

• C6040: heavy-load aluminum clamp, 200kg load, 48-51mm tubes, M10 bolt inc.;

• FCLECLFRS: ight case for 4x ECLFRESNEL;

• ECLFRSNL: narrow angle lens for ECLFRESNEL TU and DY fresnel projectors;

• UPBOX1U: rmware uploader kit, USB IN, 3p XLR DMX OUT.

PROLIGHTS - EclFresnel TW / PTW06

2 - TECHNICAL DRAWING

283 mm

[11.1 in]

439 mm

[17.3 in]

100 mm

[3.9 in]

539 mm

[21.2 in]

343 mm

[13.5 in] 283 mm

[11.2 in]

100 mm

[3.9 in]

435 mm

[17.1 in]

535 mm

[21.1 in]

342 mm

[13.4 in]

558 mm

[21.9 in]

343 mm

[13.5 in]

285 mm

[11.2 in]

552 mm

[21.7 in]

Fig. 01

ECLFRESNELPTW - Weight: 9.7 kg - 21.38 lbs

ECLFRESNELTW - Weight: 7.5 kg / 16.53 lbs

PROLIGHTS - EclFresnel TW / PTW 07

443 mm

[17.4 in]

539 mm

[21.2 in]

100 mm

[3.9 in]

439 mm

[17.3 in]

283 mm

[11.2 in]

100 mm

[3.9 in]

535 mm

[21.1 in]

635 mm

[25.0 in]

443 mm

[17.4 in]

652 mm

[25.7 in]

546 mm

[21.5 in]

286 mm

[11.2 in]

Fig. 02

ECLFRESNELPTW - Weight: 9.7 kg - 21.38 lbs

ECLFRESNELTW - Weight: 7.5 kg / 16.53 lbs

PROLIGHTS - EclFresnel TW / PTW08

Fig. 03

3 - INSTALLATION

MOUNTING

Check that the supporting structure can safely bear the weight of all installed xtures, clamps, cables,

auxiliary equipment, etc. and complies with locally applicable regulations.

When suspending the xture above ground level, secure it against failure of primary attachments by

attaching a safety wire that is approved as a safety attachment for the weight of the xture to an anchor

point on the product main frame.

Do not use removable parts or weak anchors for secondary attachment.

Warning! When clamping the xture to a truss or other structure at any angle, use clamps of half-cou-

pler type. Do not use any type of clamp that does not completely encircle the structure when fastened.

C6002

clamp

C6040

clamp

RSR0630A/B

steel security cable

RSR0630A/B

steel security cable

38 mm

1.5 in

246 mm

9.7 in

80 mm

3.1 in

Ø13 mm

Ø0.5 in

C6040

clamp

RSR0630A/B

steel security cable

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere ProLights Beleuchtungsausrüstung Handbücher

ProLights

ProLights DISPLAYCOBTRWDDY2 Bedienungsanleitung

ProLights

ProLights FURY FY250S Bedienungsanleitung

ProLights

ProLights HZ900D Bedienungsanleitung

ProLights

ProLights LUMIPAR12IRTRI Bedienungsanleitung

ProLights

ProLights Cromowash300 Bedienungsanleitung

ProLights

ProLights ARCLED345 Bedienungsanleitung

ProLights

ProLights EVO90F Bedienungsanleitung

ProLights

ProLights Diamond 193 Bedienungsanleitung

ProLights

ProLights ECLFR2KTU-DY Bedienungsanleitung

ProLights

ProLights MOVING HEAD Bedienungsanleitung

ProLights

ProLights EclPanel TWCXL Bedienungsanleitung

ProLights

ProLights EVO64CYC Bedienungsanleitung

ProLights

ProLights EXPLO3000D Bedienungsanleitung

ProLights

ProLights FLATPAR6H SUPERSLIM LEDPAR Bedienungsanleitung

ProLights

ProLights LUMIPAR7QTOUR Bedienungsanleitung

ProLights

ProLights DIGIDRIVERIP Bedienungsanleitung

ProLights

ProLights EclFresnel CT+M Bedienungsanleitung

ProLights

ProLights ArcPod 27VW Bedienungsanleitung

ProLights

ProLights ARCLED5118 Bedienungsanleitung

ProLights

ProLights CUBER128 Bedienungsanleitung

ProLights

ProLights NANOLASERRG Bedienungsanleitung

ProLights

ProLights LEDFLOWERKIT4 Bedienungsanleitung

ProLights

ProLights EclCyclorama 050 Bedienungsanleitung

ProLights

ProLights Cyber24 Bedienungsanleitung

Beliebte Beleuchtungsausrüstung Handbücher anderer Marken

Brizo

Brizo 8SP-MU-4 Bedienungsanleitung

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 Bedienungsanleitung

IKEA

IKEA BJÖRKSPIREA Bedienungsanleitung

Laserworld

Laserworld Evolution Series ES-400RGB Bedienungsanleitung

EuroLite

EuroLite LED B-40 Bedienungsanleitung

Qazqa

Qazqa Suplux SL 3 Black 103062 Bedienungsanleitung

Commercial Electric

Commercial Electric 54568141 Bedienungsanleitung

CREE LIGHTING

CREE LIGHTING 304 Series Bedienungsanleitung

Goobay

Goobay 49867 Bedienungsanleitung

ECOMAN ITALIA

ECOMAN ITALIA LED T8 Bedienungsanleitung

Alkalite

Alkalite Krypton KT-81 Bedienungsanleitung

Clas Ohlson

Clas Ohlson GU10 Bedienungsanleitung

DTS

DTS DELTA 10 F Bedienungsanleitung

ring

ring Solar Steplight Bedienungsanleitung

One Stop Gardens

One Stop Gardens 57696 Montageanleitung

SIREM

SIREM Swimeo A2 Bedienungsanleitung

Silvair

Silvair MESH-CEDRP Bedienungsanleitung

S&P

S&P PCRL80 Bedienungsanleitung