PSC Duet Bedienungsanleitung

Duet™

Scanner

Quick Reference Guide

PSC Inc

959 Terry Street

Eugene, Oregon 97402

Telephone: (541) 683-5700

Fax: (541) 345-7140

therein may be reproduced or transmitted in any form or by any means without prior written

permission of PSC Inc. Owners of PSC Inc.’s products are hereby granted non-exclusive,

revocable license to reproduce and transmit this documentation for the purchaser’s own inter-

nal business purposes. Purchaser shall not remove or alter any proprietary notices, including

any reproductions of the documentation.

Should future revisions of this manual be published, you can acquire printed versions by con-

tacting PSC Customer Administration. Electronic versions will either be downloadable from the

PSC web site (www.pscnet.com) or provided on appropriate media. If you visit our web site

and would like to make comments or suggestions about this or other PSC publications, please

let us know via the “Contact PSC” page.

Disclaimer

Reasonable measures have been taken to ensure that the information included in this

manual is complete and accurate. However, PSC reserves the right to change any

specification at any time without prior notice.

PSC and the PSC logo are registered trademarks of PSC Inc. All other trademarks and trade

names referred to herein are property of their respective owners.

Quick Reference Guide i

CONTENTS

English .......................................................................................................................................1

French ........................................................................................................................................5

Deutsch ......................................................................................................................................9

Italiano .....................................................................................................................................13

Portugues ................................................................................................................................17

Espanol ....................................................................................................................................21

Japanese .................................................................................................................................25

Chinese ....................................................................................................................................29

ii Duet™

Quick Reference Guide 1

Introduction

The Duet™ delivers high performance in a small, fixed scanner that can also be

used as a targeted handheld scanner. Its innovative design maximizes produc-

tivity and minimizes operator stress, strain and fatigue.

This Quick Reference Guide provides an overview of scanner operation. For

more detailed information about setup, installation and programming, see the

User’s Guide and Programming Kit included in PDF format on the PSC Manu-

als CD. These manuals are also available for download from the PSC website

(http://www.pscnet.com). Print manuals may be ordered from your PSC rep-

resentative (see back cover for contact information).

Operational Modes

With two scan windows, the Duet scanner can easily adapt to either fixed/por-

table or targeted handheld scanning applications. The front scan window, with

its multiple scan pattern, is used for most retail items. The rear scan window

emits a single targeted scan pattern for handheld scanning of hard to read or

bulky items, or to read an individual bar code among many bar codes.

Fixed Mode

To use the scanner in Fixed Mode, seat the

scanner securely in the stand. The scanner

can read bar codes either in the sweep or

presentation mode to accommodate differ-

ent user styles.

a. Rear scan window

b. Front scan window

c. Scan volume

d. Scan depth

Sweep Scanning

Move (sweep) the product, with the bar

code facing the scan window. Optimal

scanning distance is about 4.5 inches.

a. Front scan window

b. Bar code faces scan window

2Duet™

Presentation Scanning

Face the bar code toward the center of the

front scanner window. Move the product

with the bar code towards the scanner.

Portable Mode

Remove the scanner from the stand but do

not press the trigger switch. Present (or

sweep) the scanner to the bar code using the

front scan window.

a. Front scan window

b. Bar code

c. Stand

Targeted Handheld Scanning

1. Grasp the scan-

ner in the palm

of the hand

with the thumb

positioned on

or near the trig-

ger switch.

2. Lift the scan-

ner from the

stand and posi-

tion the scanner

over the prod-

uct to be

scanned.

2HD

a. Thumb on Trigger Switch d. Scan depth

b. Rear Scan Window e. Pointer line

c. Scan line

Quick Reference Guide 3

3. Use the Pointer Line to help locate the center of the bar code before

pressing the trigger switch. Small bar code labels need to be close to

the scan window, while larger bar code labels should be farther away.

4. Use your thumb to press the trigger switch to scan the bar code.

Release the trigger switch when you hear the "good read" tone.

To continue scanning in the Targeted Handheld Mode, repeat steps 3 and 4,

placing the Pointer Line on the next item’s bar code, and pressing the trigger

switch.

Controls & Indicators

a. Visual Indicator (LED) d. Stand

b. Trigger Switch e. Speaker

c. Interface/ DC Power Connector

Trigger Switch

Causes the scanner to enter the Targeted Handheld Mode. In this mode, the

scanner reads bar codes with a single scan line projected from the rear scan

window. Releasing the trigger switch returns the scanner to the Fixed/ Portable

Scanning Mode.

Pressing and releasing the trigger switch will also wake up the scanner, if it has

entered Sleep Mode, and return it to normal operation. This feature is a backup

to the motion sensor’s automatic wake-up function.

4Duet™

Indicator Lamp

• On dim – Indicates that the scanner is operational and ready to scan.

• Flashes once brightly when the scanner has read a bar code to indicate

a good read. This is usually accompanied by a good read tone from the

speaker.

• Flashing from dim to bright once per second indicates the scanner is in

the Sleep Mode due to an extended time of inactivity.

• Flashing repeatedly accompanied by a series of tones indicates a failure

has occurred. Contact your service personnel.

Speaker

• Normal Tone – A single tone when the scanner reads a bar code indi-

cates a good read.

• Passed Selftest – A series of four tones are emitted when power is first

applied to the scanner. This indicates the scanner passed the Selftest

and is operating properly.

• Error Tone – The speaker sounds a series of tones alerting the operator

of a possible system or component failure. If your scanner exhibits this

behavior or behaves erratically, contact your service personnel.

Changing The Volume—Scan the bar code below to cycle through the three possi-

ble volume settings (low, medium and high). Stop when the preferred volume

is heard.

Increment Volume

Quick Reference Guide 5

Introduction

Le Duet™ fournit des performances de haut niveau dans un petit scanner fixe

qui peut également être utilisé comme scanner à main avec ciblage intégré. Son

ergonomie innovante optimise la productivité et réduit le stress de l'opérateur,

la tension musculaire et la fatigue.

Ce Guide de référence rapide fournit un aperçu du fonctionnement du scanner.

Pour des informations plus détaillées sur la configuration, l'installation et la

programmation, consultez le manuel d'utilisation (User's Guide) et le kit de

programmation au format PDF figurant sur le CD des manuels de PSC. Ces

manuels sont également disponibles en téléchargement sur le site Internet de

PSC (http://www.pscnet.com). Vous pouvez commander des copies

imprimées des manuels auprès de votre représentant PSC (consultez la qua-

trième de couverture pour obtenir les coordonnées des personnes à contacter).

Modes de fonctionnement

Le scanner Duet est doté de deux fenêtres de lecture et peut facilement

s'adapter à des applications fixes, portables ou de scanner à main avec ciblage

intégré. La fenêtre de lecture avant, qui présente plusieurs configurations de

lecture possibles, est utilisée pour la plupart des articles de détail. La fenêtre de

lecture arrière dispose d'une fonction de "ciblage d'objet" pour scanner à la

main les articles dont l'étiquette est difficile à lire ou les articles volumineux ou

pour lire un code-barre spécifique parmi une liste de codes-barres.

Mode fixe

Pour utiliser le scanner en mode fixe,

installez-le fermement sur le support. Le

scanner peut lire les codes-barres en mode

transfert ou en mode présentation afin de

convenir à divers types d'utilisateurs.

a. Fenêtre de capture supérieure

b. Fenêtre de capture frontale

c. Champ de capture

d. Profondeur de champ

Scanning par balayage

Déplacez (balayez) le produit en orien-

tant le code-barre en direction de la

fenêtre de lecture. La distance optimale

de lecture est d'environ 11,4 cm.

a. Fenêtre de capture frontale

b. Code à barres face à la fenêtre de lecture

6Duet™

Scanning de présentation

Placez le code-barre en direction du cen-

tre de la fenêtre de lecture avant.

Déplacez le produit en orientant le code-

barre en direction de la fenêtre de lecture.

Mode portable

Extrayez le scanner du support mais

n'appuyez pas sur le bouton déclencheur.

Appliquez (balayez) le scanner sur le code-

barre à l'aide de la fenêtre de lecture avant.

a. Fenêtre de capture frontale

b. Le Code à barres

c. Support

Scanning à main avec ciblage intégré

1. Prenez le scanner

à la main en

plaçant le pouce

sur le bouton

déclencheur ou à

proximité.

2. Extrayez le scan-

ner du support et

placez-le au-des-

sus du produit à

scanner.

a. Bouton de déclenchement d. Profondeur de champ

b. Fenêtre de capture supérieure e. Faisceau de pointage

c. Ligne de lecture

2HD

Andere Handbücher für Duet

Inhaltsverzeichnis

Sprachen:

Andere PSC Barcode-Lesegerät Handbücher

PSC

PSC QuickScan QS6500 Bedienungsanleitung

PSC

PSC MAGELLAN 1000I Installations- und Betriebshandbuch

PSC

PSC LazerData 12000 Series Bedienungsanleitung

PSC

PSC LazerData 11000 Series Bedienungsanleitung

PSC

PSC Magellan 1400i Installations- und Betriebshandbuch

PSC

PSC PowerScan Betriebsanleitung

PSC

PSC HS1250, Bedienungsanleitung

PSC

PSC QS200 Betriebsanleitung

PSC

PSC PowerScan RF Bedienungsanleitung

PSC

PSC Duet Handbuch

PSC

PSC magellan 8100 Bedienungsanleitung

PSC

PSC Falcon PT40 Installations- und Betriebshandbuch

PSC

PSC QRG QuickScan QS3500 Bedienungsanleitung

PSC

PSC QuickScan QS2500 Installations- und Betriebshandbuch

PSC

PSC VS800 Bedienungsanleitung

PSC

PSC LINEAR IMAGER 7000 Installations- und Betriebshandbuch

PSC

PSC LazerData Series 9000E Bedienungsanleitung

PSC

PSC Magellan 2300HS Bedienungsanleitung

PSC

PSC PowerScan RF Benutzerhandbuch

PSC

PSC PowerScanTM RF Bedienungsanleitung

PSC

PSC Magellan 2200VS omega Bedienungsanleitung

PSC

PSC QuickScan 6000 Bedienungsanleitung

PSC

PSC PowerScan Handheld Betriebsanleitung

PSC

PSC QuickScan QS6500 Bedienungsanleitung

Beliebte Barcode-Lesegerät Handbücher anderer Marken

POSMicro

POSMicro Datalogic PowerScan D7100 Bedienungsanleitung

Marson

Marson MT780 Kurzanleitung zur Einrichtung

NCR

NCR RealPOS Bedienungsanleitung

Motorola

Motorola SE3300 Kurzanleitung zur Einrichtung

Element

Element P130BT Bedienungsanleitung

Motorola

Motorola Symbol LS3008 Installations- und Betriebshandbuch

Meec tools

Meec tools OBD-II / VAG Bedienungsanleitung

SICK

SICK CLP 100 Bedienungsanleitung

Royal Tag SA

Royal Tag SA I-Read Bedienungsanleitung

Welch Allyn

Welch Allyn IMAGETEAM 3800 Bedienungsanleitung

Meteor

Meteor 8310 Bedienungsanleitung

Denso

Denso BHT-500B Bedienungsanleitung

Datalogic

Datalogic Heron HD3130 Bedienungsanleitung

Motorola

Motorola MP6000 Montageanleitung

Newland

Newland NLS-HR15-BT Bedienungsanleitung

ARTDEV

ARTDEV AS-1310 Bedienungsanleitung

Aopos

Aopos AS290 Bedienungsanleitung

ENS

ENS 367-5455 Bedienungsanleitung