PUSR ST508E Bedienungsanleitung
ST508E/515N User Manual
pusr.com
1
- 2 -
Content
1. Introduction ...............................................................................................................................................- 3 -
1.1. Overview...........................................................................................................................................- 3 -
1.2. Features............................................................................................................................................- 3 -
1.3. Specification .....................................................................................................................................- 3 -
1.4. Output power & receive sensitivity .....................................................................................................- 5 -
1.5. Dimension ........................................................................................................................................- 5 -
2. Get Started.................................................................................................................................................- 6 -
2.1. Hardware interface introduction........................................................................................................- 6 -
2.2. Login setting page ............................................................................................................................- 6 -
2.3. Initializing configuration ...................................................................................................................- 7 -
3. Configuration and parameter details ..........................................................................................................- 8 -
3.1. IP settings .........................................................................................................................................- 8 -
3.2. Wi-Fi settings ....................................................................................................................................- 9 -
3.2.1. Work mode & TX power ............................................................................................................- 9 -
3.2.2. Channel & bandwidth.............................................................................................................- 10 -
3.2.3. Wi-Fi SSID & encryption .......................................................................................................... - 13 -
3.2.4. Saving the changes................................................................................................................- 15 -
3.3. To check the wireless connection..................................................................................................... - 15 -
4. Warranty..................................................................................................................................................- 16 -
5. Contact Us................................................................................................................................................- 16 -
6. Disclaimer................................................................................................................................................- 16 -
7. Revision History........................................................................................................................................ - 16 -
ST508E/515N User Manual
pusr.com
1
- 3 -
1. Introduction
1.1. Overview
Our wireless bridge series is based on the Qualcomm solution, with the high output power and high
sensitivity that come from the high-quality hardware and equipped with the intelligent dynamic polling protocol
iPoll 3 which is based on TDMA technology.
The products have excellent anti-interference ability, even in high-density transmission scenarios with more
than 64 stations, which can guarantee the stable transmission and higher throughput. Through iPoll 3, our
products support the advanced wireless traffic optimization function, QoS priority supports DSCP mode under
802.1p and supports 4 priority queues, providing the most complete support for multiple services.
The product design meets IP64 to IP66 waterproof grades and industrial standards. It provides 2kv surge
protection which can ensure the device work well in complex electrical environments. Our bridge products are
widely used in various network communications and video surveillance scenarios such as agriculture, forestry,
industry, transportation, docks, tower cranes and elevator monitoring.
1.2. Features
⚫IP64 or IP66 waterproof supported.
⚫Ultra-high output power and receive sensitivity.
⚫Ultra-wide available spectrum(4.9Ghz~6Ghz) and more flexible bandwidth(5/10/20/40Mhz).
⚫Smart station polling, smart auto-channel, adaptive auto modulation, automatic transmit power control
(ATPC) supported.
⚫Supports point-to-point and point-to-multipoint (Up to 64 points).
⚫The max coverage distance is up to 3KM.
⚫QoS (L2/L3 or DSCP/COS) - supporting different priority traffic types.
⚫Professional and responsive HTML 5 graphical user interface.
⚫Built-in rich and practical toolset (Site survey, Spectrum analyzer, Link test, Antenna alignment, Ping
Traceroute).
⚫Supports client isolation.
⚫Supports bridge, routing and repeater mode.
⚫Supports IPv6, scheduled reboot.
1.3. Specification
Model
ST508E
ST515N
Description
Compact size 5Ghz wireless
bridge
High performance 5Ghz wireless bridge
Input voltage
12 - 24 VDC passive PoE
ST508E/515N User Manual
pusr.com
1
- 4 -
Power adapter
100 –240 VAC
Max power consumption
4.5W
Wi-Fi
Protocol
802.11a/n, iPoll 3
Output Power
Up to 29 dBm (country dependent)
Receive sensitivity
Varying between -97 and -75 dBm (modulation dependent)
Frequency
4.9Ghz ~ 6Ghz (country dependent)
Channel bandwidth
5/10/20/40Mhz
MIMO
2*2
Modulation schemes
802.11 a/n: OFDM (64-QAM, 16-QAM, QPSK, BPSK)
Max rate
300Mbps
Error correction
FEC, Selective ARQ
Antenna
Built-in, 8dBi
Built-in, 15dBi
Coverage Distance
Point to point
Recommended: 1KM
Max: 2KM
Recommended: 3KM
Max: 5KM
Point to multiple
points(same model)
Recommended: 0.5KM
Max: 1KM
Recommended: 1KM
Max: 3KM
Ethernet
Ethernet
1*RJ45, 10/100M(PoE in)
Software
Wireless operating modes
Access point (auto WDS), access point (iPoll 3), station (WDS, iPoll 3), station (ARP
NAT)
Wireless techniques
Smart station polling, smart auto-channel, adaptive auto modulation, automatic
transmit power control (ATPC)
Wireless security
WPA/WPA2 personal, WPA/WPA2 enterprise, WACL, user isolation
Wireless SoS
4 queues prioritization on iPoll 3
Network operating modes
Bridge, router IPv4, router IPv6
Network techniques
Routing with and without NAT, VLAN
WAN protocols
Static IP, DHCP client, PPPoE client
Service
DHCP server, SNMP, NTP client, router advertisement daemon, ping watchdog
Management
HTTP(S) GUI, SSH, SNMP read, Telnet
System monitoring
SNMP v1/2c/3 server, Syslogs, system alerts via e-mail and SNMP trap
Wireless tools
Site survey, link test, antenna alignment
Other
Scheduled reboot
Physical Parameters
Dimension
141*77.5*53mm(L*W*H)
158*97*38mm(L*W*H)
Weight
300g
165g
Installation
Pole Mounting, wall mounting
Pole Mounting
Operating Temperature
-40°C ~ +70°C
Operating Humidity
0 ~ 90 %(non-condensing)
ST508E/515N User Manual
pusr.com
1
- 6 -
Figure 2. Dimension of ST515N
2. Get Started
2.1. Hardware interface introduction
Refer to the following figure to connect the wireless bridge to the computer through a PoE adapter and an
Ethernet cable.
Figure 3. Hardware connection
2.2. Login setting page
Connect PC to the LAN port of the AP controller, and set the PC IP to static IP 192.168.2.xxx, such as
192.168.2.101. The IP should be on the same network segment as the wireless bridge.
Enter the default IP address of the wireless bridge 192.168.2.66 in the browser, and the browser will navigate
to login page. The username is admin, the password is admin01.
ST508E/515N User Manual
pusr.com
1
- 7 -
Figure 4. Login page
2.3. Initializing configuration
When you log in to the device for the first time, you need to read and agree to the user agreement. As
different countries may have different requirements for equivalent omnidirectional power and equipment
working channels, users can choose a country based on the actual situation and strictly abide by local laws and
regulations when using the product.
If you need to open all the power and channels of the devices, please select the country as "Compliance
testing", which is the test mode. In this mode, you can adjust the transmit power of the device to the maximum
and enable all channels. The country code can also be changed on the configuration page after completing the
initial configuration.
ST508E/515N User Manual
pusr.com
1
- 8 -
Figure 5. Initializing configuration
3. Configuration and parameter details
3.1. IP settings
This wireless bridge supports both static IP and DHCP client. The factory default is a static IP.
In static IP mode, please ensure the uniqueness of the IP address to avoid IP conflicts with other devices on
the network.
In DHCP mode, the wireless bridge is assigned an IP address by the DHCP Server device
ST508E/515N User Manual
pusr.com
1
- 9 -
Figure 6. Static IP
Figure 7. DHCP client
3.2. Wi-Fi settings
The Wi-Fi settings include Work Mode, TX power, SSID and Wi-Fi encryption.
3.2.1. Work mode & TX power
Work mode: The wireless bridge can work at Access Point or remote station mode.
TX power: The stronger the TX power, the stronger the signal, and the longer the transmission distance. You
can adjust the TX power based on the needed transmission distance.
➢Access point mode: For point-to-point pairing, the ipoll2 is recommended, while ipoll3 is
recommended for point to multiple point pairing.
ST508E/515N User Manual
pusr.com
1
- 10 -
Figure 8. Access point mode
➢Remote station mode: Set the remote station TX power according to the actual transmission distance.
Figure 9. Remote station mode
3.2.2. Channel & bandwidth
➢Access point mode: The default working channel is "Auto".
When the device starts up, it will automatically scan the wireless signals in the environment and
automatically select a channel that it thinks is relatively clean. Our 5Ghz equipment has rich spectrum
resources (4.9Ghz~6.0Ghz), but in an environment with many wireless devices, it is still recommended
to plan and use different fixed channels for multiple devices to avoid interference.
Users can use the device's built-in "Wireless Environment Survey" and "Spectrum Analysis" tools to
analyze the wireless channel occupancy in the environment to provide a reference for channel
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere PUSR Netzwerk-Hardware Handbücher
Beliebte Netzwerk-Hardware Handbücher anderer Marken
Matrix Switch Corporation
Matrix Switch Corporation MSC-HD161DEL Bedienungsanleitung
B&B Electronics
B&B Electronics ZXT9-IO-222R2 Bedienungsanleitung
Yudor
Yudor YDS-16 Bedienungsanleitung
D-Link
D-Link ShareCenter DNS-320L Bedienungsanleitung
Samsung
Samsung ES1642dc Gebrauchsanweisung
Honeywell Home
Honeywell Home LTEM-PV Montageanleitung
