Pyronix EURO 46 APP Bedienungsanleitung

User Manual

Connect to your

home or business

from anywhere in

the world.

Software version ≥2.1

RINS1840-2

EURO 46 APP

Two Way Wireless High Security 3

User Friendly Keyfobs 4

User Automation Outputs 4

Operating the Euro 46 APP Panel 5

How to navigate through the menus/Button Operation 6

Chime Feature: 7

HU Alarm from keypad: 7

Using the Keyfob - The Buttons: 8

Setting your Euro 46 Panel 9

Unsetting your Euro 46 Panel 10

Setting / Unsetting with the Tag Reader 11

The Wireless Arming Station 12

SMS Commands 13

Master Manager menu options 15

Entering the Master Manager menu 16

Master Manager menu: Date and Time 16

Master Manager menu: Operate User Automation Outputs 17

Master Manager menu: Omit Inputs 17

Master Manager menu: Change Codes 18

Master Manager menu: Review Logs 21

Master Manager menu: Wi-Fi Setup 22

Master Manager menu: Set Up App Data 23

Master Manager menu: Set Up App Data 24

Master Manager menu: SMS Phonebook 25

Master Manager menu: Walk Test 25

Master Manager menu: Siren Test 25

Master Manager menu: Allow Engineer Menu 26

Master Manager menu: Block Remote Set 26

Master Manager menu: Block UDL 27

Master Manager menu: System Sounds Demo 27

Master Manager menu: Exit Master Manager menu 28

Engineer Contacts / Installation Record Table 28

Input tables 29

User Tables 30

Outputs Table 31

Product Information 32

Contents

HomeControl+ Smartphone APP Remote Control

The system will notify you via APP Push-notications real-time, for example: Setting and Unsetting events, Alarms, i.e.

notication that your child has returned home from school safely; or notication of a leakage of water in your property etc.

Two Way Wireless High Security

Thank you for choosing this alarm system as protection for your property. It is designed to conform to the latest industry

standards.

There are many features that the alarm system has, and these can be explained in detail by your alarm engineer.

Wireless peripherals may be used on this alarm system; these include wireless sensors and wireless set/unset keyfobs. Please

ask your alarm engineer for more details.

With a host of features and accessories, the EURO 46 APP alarm system oers maximum exibility and ensures that each alarm

system can be individually tailored to the needs of the application.

Battery Monitoring/Saving

Advanced technology preserves the battery life of each wireless device.

The EURO 46 APP panel also informs you in advance of when a battery needs replacing, giving you enough time to change the

battery in the specic device before it stops working. This key feature keeps your environment fully protected, unlike other

conventional systems.

The HomeControl+ smartphone App can even be set to send you a notication of when a battery needs replacing.

High Security Encryption

128 bit high security wireless encryption protocol and intelligent wireless jamming detection.

User Friendly Keyfobs

The two-way wireless keyfob allows you to see the status of your EURO 46 APP Panel via three colour

LEDs:

System arm: A RED LED will illuminate.

System disarm: A GREEN LED will illuminate.

System fault: An AMBER LED will illuminate (this will ash when the keyfob is unable to set the

system).

It is possible to allocate dierent functions to each keyfob, such as: setting or unsetting

dierent areas, activating outputs to control external devices (such as: gates), requesting the

system status and activating HU (Hold-Up / Panic alarms).

Up to 32 wireless keyfobs can be added to your EURO 46 APP Panel. Each wireless keyfob has a unique ID, which can be

reported to the ARC and HomeControl+ App. These are stored in the event log of the EURO 46 APP Panel individually. The

keyfob also allows you to individually set or unset every area, giving you total control of your system.

NOTE: Keyfobs may only be used if the EURO-ZEM32-WE is installed. Ask your engineer for more information.

User Automation Outputs

The EURO 46 APP Panel gives you the option to operate up to 30 devices (such as: gates, lights, sprinklers.), via your keypad or

remotely via your keyfob or HomeControl+ App.

HomeControl+ App and SMS notications

Your EURO 46 APP Panel will provide you with real-time push notications on your phone or within the HomeControl+ App

(See HomeControl+ App Setup Guide), such as: that your child has returned home from school, or a leakage of water in your

property. You can also opt to receive these via SMS text messages (THIRD PARTY SIM CARDS ONLY).

Operating the EURO 46 APP Panel

Default Master Manager Code: 2222 (Press D Key before entering code).

Setting/Unsetting Methods:

There are four dierent methods that can be used for setting or unsetting your alarm: using the EURO 46 APP Panel keypad,

using a proximity tag, a keyfob or the HomeControl+ App on your mobile (Android or iOS) device.

How to navigate through the menus/Button Operations

Press to quick exit

menu / selects Area A.

Press to move

backwards to the

previous main menu

item / selects Area B.

Press to move back

to the previous

option in a sub-menu

/ Displays additional

information in the

log / Selects Area C.

Scrolls forwards in the

log / selects Area D,

Press to enter Master

Manager Code.

Dedicated Hold-Up Alarm

key (see page 7)

Fire Alarm key - only if

setup by installer. Hold for

3 seconds to activate a re

alarm.

Dedicated Left Arrow Key

(scrolls left in menu)

Dedicated Right Arrow Key

(scrolls right in menu)

EURO-LCDPZ

Surface / Flush Mount

Keypad

This Keypad has the

same key functions as

the other, but features

4 extra dedicated keys

over the standard Euro

Keypad:

EURO-LCD

Euro Keypad

The Master Manager menu allows you to set up specic

features by asking you a series of setup questions:

No - Scrolls forwards in the main menu and sub-menus

/ returns you to the previous menu level once you have

scrolled through all of the options.

Yes - Selects items and enters into a sub-menu or

option.

Main menus are in capital letters and nish with a question mark, e.g.‘CHANGE CODES?’.

Sub-menus are in lower case letters and nish with a question mark, e.g. ‘Add New User?’.

Programmable options are in lower case letters and DO NOT nish with a question mark, but instead: ‘Yes/No’, or other

options, such as: ‘User / Manager’.

To navigate through the menu system, simply answer the questions in the main and sub-menus. For example, if the question

is: ‘CHANGE CODES?’, pressing [YES] will take you into the sub-menu ‘Add New User?’, and pressing [YES] again will then take

you into the programmable options of this sub-menu. If at this point you press [NO], you will be taken out of the individual

option. Continue to press [NO] and you will navigate through the sub-menus and eventually return to the main menu.

How to navigate through the menus/Button Operation

Chime Feature: HU Alarm from keypad:

This feature can be set up by your installer and

is most commonly enabled for doors using the

magnetic contact. When activated you will hear

a ‘chime’ sound to alert you whenever the door

is opened.

To disable the chime on the your panel keypad,

simply close all doors that chime and when ‘c’ is

displayed, press the ckey. Press the ckey

again to re-enable the chime.

With the standard Euro Keypad, if you require a Hold-Up (HU)

alarm, press and hold both the 1and 7keys for 3 seconds and

a ‘HU’ alarm will be generated.

If you have the Surface or ush mount keypad (pictured on the

right below) then it has a dedicated HU Alarm button - hold this

for 3 seconds to generate a HU Alarm

Note: The HU feature must be enabled by your engineer (silent or

audible alarm options available).

Programed for ‘Set Area’: one or more

areas will be set when pressed.

Programed for ‘Unset Area’: one or more

areas will be unset when pressed.

Programed for ‘User Output’. For example;

a gate can open or close at a button press.

Programed for ‘Status LED’. This displays the

system status when pressed:

Using the Keyfob (If you have a Wireless ZEM ):

Locking the keyfob:

All four buttons on the keyfob can be ‘locked’ to prevent you from

accidentally pressing them. You can do this by pressing the two

central keys together ( >& I ) or the two outer keys together

(& II ).

As indicated on the diagram to the right. A RED LED will ash to

indicate that the fob has been locked. To unlock the keyfob press

the same two keys together again and a GREEN LED will ash

to indicate that it is now unlocked. Please note that locking the

keyfob disables all LED indications.

RED = Set

GREEN = Unset

AMBER = Fault

Quick Setting:

If you have chosen to program one of the keyfob buttons as‘Set Area’, you can then opt to‘quick set’ that area. When you press

the button to set the area, the EURO 46 APP panel will begin to count down your exit time (depending on what exit mode

has been programed by your engineer). Once this ‘setting stage’ begins, press the same button on the keyfob again and the

system will set immediately.

The unset LED on the Control Panel will turn o and a beep will sound to signal that the system has been set. The RED LED on

the keyfob will illuminate for a short time to conrm this.

The wireless keyfob has four buttons that can be

programed to perform specic functions: no action, show

status, set area, unset area, latch output, timed output and

HU alarm activation. This can be customised to operate as

desired (programed in the function ‘Change Codes’). The

keyfob diagram on the right shows how each button can

be programed:

Press outer

keys together

or inner keys

together:

The LED will

light up RED

and the keys

will lock.

Setting your Euro 46 APP panel

There are four ways that you can set your system.

Enter your user code and select any areas that are to be set, then press the  button as shown below:

Press the set () button on the keyfob

and then release, the keyfob will set the

areas it has been assigned to by your

installer.

Present your tag and select any areas

that are to be set, then press the

 button (presenting a tag takes

you straight to the ‘Set Areas’screen

in the diagram above)

NOTE: Options 1 & 2 only function if‘Flexi Set’ is

selected as ‘Yes’in the ‘CHANGE CODES?’menu.

If selected as ‘No’, then all areas allocated to

your user code will set.

NOTE: Your system may

not have a wireless ZEM

installed - and therefore

not have keyfobs.

NOTE: The keyfob buttons

can be programed in the

Master Manager ‘CHANGE

CODES’ menu by going to

‘Delete/Change User’ and

selecting keyfob from the

list of users.

100%9:41 AM

Open the HomeControl+ App

on your mobile device and sign

into your system with your user

code and password details.

Next - touch the green (unset)

padlock icons to

turn them to red

padlock icons and

set those areas.

NOTE: Please see the

App guide for further

details or contact

your installer.

2. 3. 4.

Default Master Manager Code: 2 2 2 2

We highly recommend that this is changed.

OR - User code given by your installer.

YES YES YES

Euro 46 App

Time 02:11 c

Enter Your Code

[******]

Set Areas

[01ABCD]

Please Wait

Arming Wireless

Setting [029]

Area A

Press the 0, 1, A, B, C, or D keys

to select the area to be set

User

Code

User

Code

YES

Stop Setting?

[******]

Unsetting your Euro 46 APP panel

There are four ways that you can unset your system.

Enter your user code and select any areas that are to be unset, then press the  button as shown below:

Press the unset ( >) button on the

keyfob and then release, the keyfob will

unset the areas it has been assigned to

by your installer.

Present your tag and select any areas

that are to be unset, then press the

 button (presenting a tag takes

you straight to the ‘Unset Areas’

screen in the diagram above)

NOTE: Options 1 & 2 only function if‘Flexi Unset’

has been enabled by your engineer. If it has not

been enabled, then all areas allocated to your

user code will unset.

NOTE: Your system may

not have a wireless ZEM

installed - and therefore

not have keyfobs.

NOTE: The keyfob

buttons can be

programed in the Master

Manager ‘CHANGE

CODES’ menu by going

to ‘Delete/Change User’

and selecting keyfob

from the list of users.

100%9:41 AM

Open the HomeControl+ App

on your mobile device and sign

into your system with your user

code and password details. Then

touch the red (set) padlock

icons to turn

them to green

padlock icons and

unset those areas.

NOTE: Please see the

App guide for further

details or contact

your installer.

2. 3. 4.

Default Master Manager Code: 2 2 2 2

We highly recommend that this is changed.

OR - User code given by your installer.

YES YES

Euro 46 App

Time 02:11 c

Euro 46 App

Time 02:11 c

Enter Your Code

[******]

Unset Areas

[01ABCD]

Press the 0, 1, A, B, C, or D keys

to select the area to be set

User

Code

Andere Handbücher für EURO 46 APP

Inhaltsverzeichnis

Andere Pyronix Sicherheitssystem Handbücher

Pyronix

Pyronix XDL12TT-AM Bedienungsanleitung

Pyronix

Pyronix Enforcer V10 Bedienungsanleitung

Pyronix

Pyronix PCX 256 Bedienungsanleitung

Pyronix

Pyronix Paragon Plus Bedienungsanleitung

Pyronix

Pyronix Enforcer 32WE Bedienungsanleitung

Pyronix

Pyronix HOMECONTROLHUB Bedienungsanleitung

Pyronix

Pyronix Deltabell E Bedienungsanleitung

Pyronix

Pyronix PCX 256 Bedienungsanleitung

Pyronix

Pyronix Enforcer 32WE Bedienungsanleitung

Pyronix

Pyronix Enforcer Bedienungsanleitung

Pyronix

Pyronix PCX 256 Betriebsanleitung

Pyronix

Pyronix ENFORCER V11 Service-Handbuch

Pyronix

Pyronix Enforcer Bedienungsanleitung

Pyronix

Pyronix PCX-12 Bedienungsanleitung

Pyronix

Pyronix Enforcer 32WE Bedienungsanleitung

Pyronix

Pyronix PCX 256 Bedienungsanleitung

Pyronix

Pyronix PCX 78 Bedienungsanleitung

Pyronix

Pyronix ENFORCER Series Betriebsanleitung

Pyronix

Pyronix V2 TEL Bedienungsanleitung

Pyronix

Pyronix Enforcer 32-W Bedienungsanleitung

Pyronix

Pyronix EURO 46 V10 Bedienungsanleitung

Pyronix

Pyronix PCX 256 Bedienungsanleitung

Pyronix

Pyronix Matrix 6/816 Bedienungsanleitung

Pyronix

Pyronix 256 Benutzerhandbuch

Beliebte Sicherheitssystem Handbücher anderer Marken

Inner Range

Inner Range Concept 2000 Bedienungsanleitung

Climax

Climax Mobile Lite R32 Montageanleitung

CADDX

CADDX NX-6 Bedienungsanleitung

FBII

FBII XL-31 Series Bedienungsanleitung

Johnson Controls

Johnson Controls PENN Connected PC10 Bedienungsanleitung

Aeotec

Aeotec Siren Gen5 Bedienungsanleitung

Blaupunkt

Blaupunkt SA 2700 Bedienungsanleitung

IDEAL

IDEAL Accenta Betriebsanleitung

AJAX

AJAX DoubleButton Bedienungsanleitung

Swann

Swann SW-P-MC2 Bedienungsanleitung

Ecolink

Ecolink Siren+Chime Bedienungsanleitung

Digital Monitoring Products

Digital Monitoring Products XR150 Bedienungsanleitung

EDM

EDM Solution 6+6 Wireless-AE Bedienungsanleitung

Highway Safety Group

Highway Safety Group EA401 Bedienungsanleitung

Siren

Siren LED GSM Bedienungsanleitung

Detection Systems

Detection Systems 7090i Montageanleitung

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Bedienungsanleitung

Siemens

Siemens FDM273 Bedienungsanleitung