Pyronix EURO 46 V10 Bedienungsanleitung

EURO 46 V10

User Manual

RINS1943-1

Software Version >10

PD6662:2010+IA501:2015

EN50131-1:2008+A1:2009

EN50131-3:2009

Security Grade (SG) 3 - Large

Security Grade (SG) 2 - Small

Environmental Class (EC) II

EURO 46V10 User Manual

Contents

Introduction 5

HomeControl+ App 6

Setting Devices 7

Wired Keypads 7

Internal Tag Readers 7

External Tag Readers 7

Wireless Arming Stations 8

Setting the System 9

Using a PIN Code or a Tag 9

Un-setting the System 9

Using a PIN Code or a Tag 9

After an Alarm 10

Using a Proximity Reader 11

Setting and Un-setting the System 11

Entry Control 11

Anti-Code / Engineer Restore 12

Anti-Code Restore 12

Engineer Restore 12

Fault Indications / Unable to Set 13

Fault Indications 13

Unable to Set 13

Advanced Functions 13

Chime 13

Omitting an Input 13

Keypad Hold Up / Panic Alarm 14

Master Manager Menu 15

Menu Features Overview 15

Entering and Exiting Master Manager Menu 15

Menu Options 16

Set Date and Time 16

Operate User Outputs 17

Omit Inputs 17

Edit Users (Adding New Users) 17

Edit Users (Deleting and Changing Users) 19

Edit Users (Changing Master Manager Code) 19

Event Log 20

Set up App Data 21

Module Set Up 22

SMS Phonebook 23

WalkTest 23

SirenTest 24

Dial Out Menu 24

Allow Engineer Menu 24

Block UDL Set 24

Block UDL 25

System Sounds Demo 25

Using the HomeControl+ App 26

Adding a Panel to the App 26

Connecting to a Panel 26

Setting and Un-setting the System 27

Sensors, Controls and History 28

Notiﬁcations 28

The Main User Interface 29

EURO 46V10 User Manual

Engineer Contact Details andTables 30

Engineer Information 30

Certiﬁcation 30

InputTable 32

Input Notes 34

UsersTable 35

User Notes 37

HomeControl+ App Icons 38

Disclaimer 39

EURO 46V10 User Manual

Introduction

This alarm system has been designed with your security in mind; with quick and easy installation and

minimal maintenance, this system protects your home or property with a multitude of unique features.

As well as wired, this system can take full advantage of innovative two way wireless technology,

with the the wireless devices on this system constantly communicating with each other using High

Security Wireless Encryption Protocol.

Compared to conventional one way wireless systems, where devices can be ‘asleep’ for up to ﬁve

minutes at a time, therefore compromising your security, this wireless technology ensures your safety

at your home or ofﬁce at any time.

This alarm system has been engineered to be secure, reliable and easy to use. It includes the

following features:

Battery Supervision

Advanced technology preserves the battery life of each wireless device. However, the system informs

you when a battery needs replacing upto a month in advance before the device stops working. This

key feature gives you enough time to change the battery in the speciﬁc device. Conventional wireless

alarm systems may not give you a low battery warning signal, meaning that devices could stop

working, leaving your environment unprotected.

User Automation Outputs

These give you the option to operate up to 20 devices such as gates, lights, garden sprinklers, etc.

via your keypad or remotely via your key fob, extending the use of your security system.

User Notiﬁcation

Receive notice via SMS text message or push notiﬁcation of any incidents within your home in real

time. This can be programmed to send in different situations such as:

• System is set or unset: Notiﬁcation that your child has returned home from school safely.

• Alarm activation: Notiﬁcation that the alarm has been triggered, allowing you to monitor your home

from anywhere in the world.

This alarm system has 6 areas which may be set up in the following way:

Area A: Full set of the house

Area B: Downstairs set. Upstairs unset.

Area C: Garage set. Rest of house unset.

Your engineer will be able to design the system according to your needs.

EURO 46V10 User Manual

AES-256

Encryption

Set and unset your system

View your system status in real time, including: alarm, CO and

smoke detectors

Customise and receive push notifications from your system

Have instant access to your events and history log

Control appliances such as lights, garage doors, gates and

blinds

All using an encrypted, highly secure system, for extra peace

of mind that your family and home is safe and secure

Connect to your home from anywhere in

the world

HomeControl+ App

100%9:41 AM

10:09

EURO 46V10 User Manual

Setting Devices

Wired Keypads

Internal Tag Readers

External Tag Readers

Additional wired keypads may also be connected to the alarm

panel, please ask your engineer for more information.

a= Exits the Master Manager Menu and selects Area A

when setting.

b= Moves backwards in the Master Manager Menu and

selects Area B when setting.

c= Enables chime, displays additional information in

the event log, and selects Area C when setting.

d= Moves forward in the log, scrolls between options

and enters the Master Manager Menu and selects Area D

when setting.

pf= Not used.

[]= Directional buttons and enables/disables functions.

I= Selects commands.

A= Cancels items, resets the panel and moves to next item

in a menu item.

Euro 46

Time 10:09 c

The internal tag reader can be used for setting/un-setting, entry control or access control.

Ask your engineer for more details.

The external tag reader can be used for setting/un-setting, entry control or access control.

Ask your engineer for more details.

Proximity area (please present your tag here)

:Alert LED

;Alarm LED

<Tamper LED

=Fault LED

>Unset LED

To set/unset the system using the external tag reader,

present a pre-programmed tag to the centre of the device.

The device will display the system status:

Green = Unset

Red = Set

Present the tag again within 10 seconds and the system

will set or unset.

The system will then set depending on the type of exit

mode programmed (Final Door, Timed or Push to set),

EURO 46V10 User Manual

Wireless Arming Stations

If you are using a tag to set / unset the intruder

system, press any key ﬁrst (except d), to ‘wake’

the wireless arming station before presenting a tag.

Alternatively, if a user code is being used, please

enter the code. The wireless arming station will

automatically ‘wake’ once the ﬁrst button is pressed.

After a tag or code has been accepted, choose the

area to set by pressing the a, b, cor d

keys. The key will illuminate indicating

that area has been chosen to be set. Once

conﬁrmed, press the tkey.

To unset, simply enter the user code.

OP 1 OP 2 OP 3OP 4

Press the dkey and enter the Master

Manager Code.

The keys 1 2 3 and 4will illuminate.

The OP1 – OP4 LEDs will illuminate once the 1-4 numeric

keys have been pressed. Once illuminated, it signiﬁes that

the output has triggered. Press the key again to deactivate

the output.

For information on how these may have been programmed,

please speak to your engineer.

Setting and Un-setting

Activating the Outputs

OP 1 OP 2 OP 3OP 4

Check out our wireless range at www.pyronix.co.uk

EURO 46V10 User Manual

Setting the System

Un-setting the System

Using a PIN Code or a Tag

Enter a valid PIN code or present a valid tag to the ‘tag

symbol’ (which is to the left of the LCD screen).

Enter the area you wish to set, and press f. ‘Please

wait setting wireless’ will be displayed.

There are three different setting methods, your engineer

will demonstrate the appropriate exit method for your

installation:

Final Door: Once the exit time has started, leave the

building and make sure the exit door is opened and

then closed properly.

Timed: Make sure you leave the building before the

timer shown on the keypad expires.

Push to set: Press the push to set button installed by

your engineer to set the system.

Enter the building and the ‘entry time’ will start.

Enter a valid PIN code or present a valid tag to the ‘tag

symbol’ (which is to the left of the LCD screen).

Level Set System

Press fand the area that the code is assigned to will

be unset.

Area Set System

Select the area or areas you wish to unset then press

PLEASE NOTE: If ‘ﬂexi-unset’ is disabled then the

system will automatically unset the levels or areas set,

once a valid user code or tag is presented.

Enter Your Code

[*******]

ENTRY TIME [30]

Set Areas?

[A ]

Enter Your Code

[*******]

Please Exit via

Exit Route

EURO 46

Time 10:09 c

EURO 46V10 User Manual

Enter Your Code

[*******]

After an Alarm

Enter a valid PIN code or present a valid tag to the ‘tag

symbol’ (which is to the left of the LCD screen).

The alarm symbol will ﬂash indicating there has been an

alarm activation and the keypad will display which input

has activated.

Press hto reset the system.

Alarm silenced

Pantry

EURO 46

Time 10:09 c

Andere Handbücher für EURO 46 V10

Inhaltsverzeichnis

Andere Pyronix Sicherheitssystem Handbücher

Pyronix

Pyronix Enforcer Bedienungsanleitung

Pyronix

Pyronix Enforcer Bedienungsanleitung

Pyronix

Pyronix XD15TT Bedienungsanleitung

Pyronix

Pyronix PCX 256 Bedienungsanleitung

Pyronix

Pyronix Matrix 424 Bedienungsanleitung

Pyronix

Pyronix Enforcer 32WE Bedienungsanleitung

Pyronix

Pyronix ENFORCER Series Betriebsanleitung

Pyronix

Pyronix ENFORCER RINS1706-1 Service-Handbuch

Pyronix

Pyronix RINS1902-2 Bedienungsanleitung

Pyronix

Pyronix HOMECONTROLHUB Bedienungsanleitung

Pyronix

Pyronix ENFORCER V11 Betriebsanleitung

Pyronix

Pyronix PCX 256 Betriebsanleitung

Pyronix

Pyronix Enforcer 32-W Bedienungsanleitung

Pyronix

Pyronix PCX-12 Bedienungsanleitung

Pyronix

Pyronix PCX 78 Bedienungsanleitung

Pyronix

Pyronix Enforcer 32WE Bedienungsanleitung

Pyronix

Pyronix Enforcer 32WE Bedienungsanleitung

Pyronix

Pyronix Enforcer 32WE Bedienungsanleitung

Pyronix

Pyronix OCTAGON II Bedienungsanleitung

Pyronix

Pyronix Matrix 6/816 Bedienungsanleitung

Pyronix

Pyronix PCX 256 Bedienungsanleitung

Pyronix

Pyronix V2 TEL Bedienungsanleitung

Pyronix

Pyronix ENFORCER V11 Service-Handbuch

Pyronix

Pyronix 256 Benutzerhandbuch

Beliebte Sicherheitssystem Handbücher anderer Marken

Inner Range

Inner Range Concept 2000 Bedienungsanleitung

Climax

Climax Mobile Lite R32 Montageanleitung

CADDX

CADDX NX-6 Bedienungsanleitung

FBII

FBII XL-31 Series Bedienungsanleitung

Johnson Controls

Johnson Controls PENN Connected PC10 Bedienungsanleitung

Aeotec

Aeotec Siren Gen5 Bedienungsanleitung

Blaupunkt

Blaupunkt SA 2700 Bedienungsanleitung

IDEAL

IDEAL Accenta Betriebsanleitung

AJAX

AJAX DoubleButton Bedienungsanleitung

Swann

Swann SW-P-MC2 Bedienungsanleitung

Ecolink

Ecolink Siren+Chime Bedienungsanleitung

Digital Monitoring Products

Digital Monitoring Products XR150 Bedienungsanleitung

EDM

EDM Solution 6+6 Wireless-AE Bedienungsanleitung

Highway Safety Group

Highway Safety Group EA401 Bedienungsanleitung

Siren

Siren LED GSM Bedienungsanleitung

Detection Systems

Detection Systems 7090i Montageanleitung

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Bedienungsanleitung

Siemens

Siemens FDM273 Bedienungsanleitung