Qazqa 45839 Bedienungsanleitung

Inhaltsverzeichnis

Andere Qazqa Außenleuchte Handbücher

Qazqa

Qazqa Frances FL 1 Bedienungsanleitung

Qazqa

Qazqa Eva FL 1 Bedienungsanleitung

Qazqa

Qazqa Odense P50 Black Bedienungsanleitung

Qazqa

Qazqa JeIena FL 2 Bedienungsanleitung

Qazqa

Qazqa NAUTICA WL 2 Bedienungsanleitung

Qazqa

Qazqa 45827 Bedienungsanleitung

Qazqa

Qazqa New York WL Dark Grey Bedienungsanleitung

Qazqa

Qazqa Noud FL 105052 Bedienungsanleitung

Qazqa

Qazqa Charlois WL Black Bedienungsanleitung

Qazqa

Qazqa Hobby FL 93517 Bedienungsanleitung

Qazqa

Qazqa Elif FL 1 Black Gold Bedienungsanleitung

Qazqa

Qazqa NAUTICA WL1 91857 Bedienungsanleitung

Qazqa

Qazqa NAUTICA WL ROUND BRASS Bedienungsanleitung

Qazqa

Qazqa 90500 Bedienungsanleitung

Qazqa

Qazqa Grande FL Satin Bedienungsanleitung

Qazqa

Qazqa Margarita FL 36 Black Bedienungsanleitung

Qazqa

Qazqa Charlotte 104418 Bedienungsanleitung

Qazqa

Qazqa Shade 33 Globe White Bedienungsanleitung

Qazqa

Qazqa Antigua P220 Bronze Bedienungsanleitung

Qazqa

Qazqa 90495 Bedienungsanleitung

Qazqa

Qazqa NAUTICA WL 1 Bedienungsanleitung

Qazqa

Qazqa Parte FL Black Bedienungsanleitung

Qazqa

Qazqa Pallon FL Brass Pink Bedienungsanleitung

Qazqa

Qazqa Simon WL 2 PIR Bedienungsanleitung

Beliebte Außenleuchte Handbücher anderer Marken

Sealey

Sealey LED37 Bedienungsanleitung

nordlux

nordlux VEJERS Benutzerhandbuch

SImx

SImx ELITE LED LHTC637 Bedienungsanleitung

GEV

GEV CAROLINE 10833 Bedienungsanleitung

NEBO

NEBO NEB-LSP-0020 Bedienungsanleitung

WE-EF

WE-EF PFL540 LED Bedienungsanleitung

Lindby

Lindby 9949029 Bedienungsanleitung

HEPER

HEPER DOGO Side LW6048.585-US Montage- und Bedienungsanleitung

HEPER

HEPER LW8034.003-US Montage- und Bedienungsanleitung

Maretti

Maretti VIBE S 14.6080.04.A Bedienungsanleitung

BEGA

BEGA 84 253 Handbuch

HEPER

HEPER MINIMO Montage- und Bedienungsanleitung

LIGMAN

LIGMAN BAMBOO 3 Bedienungsanleitung

Maretti

Maretti TUBE CUBE WALL 14.4998.04 Bedienungsanleitung

Maxim Lighting

Maxim Lighting Carriage House VX 40428WGOB Bedienungsanleitung

urban ambiance

urban ambiance UQL1273 Bedienungsanleitung

TotalPond

TotalPond 52238 Bedienungsanleitung

Donner & Blitzen

Donner & Blitzen 0-02661479-2 Bedienungsanleitung

INSTALLATION INSTRUCTIONS

Please read these instructions carefully before attempting to install this

product. It is advisable to keep these instructions in a safe place for future reference.

Must be installed by a qualified electrician.

PARAMETER:

IP Rating IP44

Rated Voltage AC 220-240V, 50Hz

Rated Wattage 3xMax. 100W

Protection Class Class I

Lampholder E27

Electrical Installation

Always switch off the electricity supply at the mains during installation and maintenance. We

recommend that the fuse is withdrawn or circuit breaker switched off at the distribution board whilst

work is in progress (turning off the light switch is not sufficient).

1. A concrete filled hole with insulated piping for the mains cable need to be setup. Feed the

mains cable through the insulated piping (not supplied) allowing enough surplus to connect

into the terminal block.

We suggest that you use H05RN-F specification cable (not supplied) which is an outdoor grade,

rubber sheathed cable. The cable must have a minimum cross sectional area of 1.0mm².

2. Fix the tripod (A) on top the concrete.

3. Insert the three anchor bolts (B) through the tripod (A) into the concrete with the threaded part

above the ground.

4. The next thing can do once the concrete has dried.

5. Twist and remove the cover and install the lamp.

Replacement lamp(s) should be of the same type, voltage and wattage as specified on the label.

CAUTION: The lamp will become hot. Switch off and allow to cool before changing the

lamp.

6. String the electric cord, from the lamp head (F) thru upper pole (E), lower pole (D) and base

(C).

7. Attach the lamp head (F) onto the upper pole (E) and then secure the two together with the

hex bolts (J3).

8. Connect the mains supply to the terminal block, using the following colour code for the wiring:

Connect the Brown (Live) wire to the corresponding terminal on the terminal block marked L.

Connect the Green/Yellow (Earth) from the mains supply to the Earth terminal marked E or .

Connect the Blue (Neutral) wire to the corresponding terminal on the terminal block marked N.

9. Lift the base (C) onto the anchor bolts (B) and secure with the nut covers (J1) and locking

washers.

10. Attach base (C) to lower pole (D) using screws (J2) and locking washers.

11. Thread lower pole (D) to upper pole (E) and secure with the screw.

12. Restore mains supply and switch on.

Care and Use

1. This product must be earthed.

2. Please use the double-pole-off switch.

3. Replace any cracked/damaged diffuser immediately-do not use if they are damaged.

45839

A

B

C

D

E

F

J1 J2

J3