Qtx BUSKER-12 Bedienungsanleitung

BUSKER

Portable PA Units

Order ref: BUSKER-12 (178.866UK)

BUSKER-15 (178.868UK)

User Manual

VERSION 2.0

Busker User Manual

Caution: Please read this manual carefully before operating

Damage caused by misuse is not covered by the warranty

Introduction

Thank you for choosing a Busker portable PA unit. This versatile portable PA unit is packed

with features in a compact, manageable enclosure and is suitable for a wide array of

applications ranging from public address for presentations to outdoor karaoke.

Package Contents

Please check the contents to ensure that the product has been received in good condition.

If you find any accessory is missing or the product has arrived with any problems, please

contact your retailer at once.

•Busker portable PA unit

•IEC power lead(s)

•2 x VHF handheld microphones

This product contains no user-serviceable parts so make no attempt to try to fix or modify this

item yourself as this will invalidate the warranty. We recommend you keep the original

package and proof of purchase for any possible replacement or returned demand.

Warning

To prevent the risk of fire or electric shock, do not expose this appliance to rain or moisture.

To prevent electric shock do not remove the cover. No user serviceable parts inside. Refer

servicing to qualified service personnel.

Safety

Prior to connecting mains, check the supply voltage is correct and the IEC mains lead is OK.

Avoid ingress of water or particles into the enclosure.

If the internal IEC fuse blows, refer the unit to qualified service personnel

If the VHF microphones are to be unused for a long period of time, remove the batteries and

store for later use.

Placement

Keep the unit out of direct sunlight and away from heat sources.

Place the unit in an upright position during use and storage.

Keep the unit away from moisture or dusty environments.

Cleaning

Use a soft cloth with a neutral detergent to clean the cabinet, panel and controls.

To avoid damage, do not use solvents to clean this equipment.

Busker User Manual

Front Panel

Rear Panel

VHF microphone indicators

VHF Mic A volume

VHF Mic B volume

USB port

LED display

SD/MMC card slot

USB/SD/FM/Bluetooth volume

Media player Mode select

Playback Repeat mode select

USB/SD memory device select

Previous track (hold seek reverse)

Play/Pause

Next track (hold seek forward)

Guitar input volume

Echo level

Wired mics volume

Bass EQ control

Treble EQ control

Master volume

Microphone 2 input jack

Microphone 1 input jack

Guitar input jack

VHF microphone antennas

IEC mains inlet & fuse

Microphone talk-over select

Line output L+R RCA

Line input L+R RCA

Line input stereo 3.5mm jack

Power indicator LED

Power on/off switch

Battery charging & level LEDs

D.C. power input terminals

Busker User Manual

Powering up

Your new Busker portable PA unit may arrive with you with the internal battery charged.

Before connecting to the mains, turn down all volume controls and switch the unit on (30) and

see if the power LED lights (29). If not, you will need to charge the battery before use away

from mains power.

Connect the Busker unit to the mains using the appropriate IEC power lead supplied (24).

When not in use but connected to the mains, if the POWER switch is in the OFF position, the

internal battery will be re-charged from the mains supply, indicated by a CHARGING LED (31)

which lights when charging.

You may otherwise opt to connect the DC input at the rear (32) to an external 12-15Vdc

supply (e.g car battery) or use the internal battery if charged.

When powered up, BASS and TREBLE controls (17, 18) should remain pointing vertically

(i.e. 12-o-clock position). Turn up the MASTER VOLUME control (19) part way and switch

TALKOVER (25) off.

Your Busker unit should now be ready to operate.

VHF Wireless Microphones

Extend the 2 VHF antennas (23) at the rear of the unit. Insert batteries into the handheld

microphones by carefully unscrewing the base of each and connecting the “+” and “-”

terminals of the batteries to the corresponding contacts inside the mic body, taking care to

observe the correct polarity. Turn the VHF MIC controls (2, 3) up part way for checking.

Switch on each wireless mic in turn –the signal indicator LEDs (1) on the front of the unit

should light as a result. If the LED on the transmitter lights dimly, change the battery.

Gradually increase the VHF VOL controls, testing each microphone in turn for output through

the speaker.

Take care not to incur “feedback” (howling or screeching sound through the speaker) by

keeping the microphone a sensible distance from the speaker and pointing away from the

speaker so that it doesn’t

hear

the speaker output.

Turning the ECHO control (15) clockwise adds an echo function for singing or special effects.

The BASS or TREBLE content can be cut by turning the relevant control anti-clockwise or

boosted by turning clockwise.

When not in use, switch the wireless microphones off and remove batteries if not being used

for long periods.

Busker User Manual

External Inputs

In addition to the Busker’s own VHF microphones, two 6.3mm jack inputs (20, 21) are

provided to connect external wired or wireless microphones, which are both governed by the

WIRED MIC VOL control (16). If required, the music level can be automatically muted when

speaking into a microphone by switching in the TALKOVER feature on (25)

A further 6.3mm jack input is provided for an electric or electro-acoustic guitar (22)

Also, twin RCA and 3.5mm stereo jack input are provided for line input sources such as a CD

player or smart phone. These are both independent of the media player.

Adjacent to the twin RCA input is a twin RCA line output carrying the overall main mix. This

can be fed on to further active speakers or portable PA units via a twin RCA lead.

Internal media player

Each Busker portable PA unit has an internal media player for digital audio playback from USB

or SD/MMC media, FM tuner or via Bluetooth.

Press ‘Mode’ (9) to select the function you require - USB, SD, FM radio (89-107) or Bluetooth.

 –Use this mode for both USB and SD/MMC cards

FM Radio –(the last chosen frequency will appear)

 –Use this mode for Bluetooth™ selection

Playback from USB Device or SD/MMC Card

Inserting a USB memory device into the USB connector or SD/MMC card into the SD/MMC card

slot will automatically load up and begin playback of mp3 or wma audio tracks stored on the

media.

If playback does not start, press the Play/Pause button (12) or remove the memory device and

check that the stored files are the correct compressed audio format before re-connecting.

PLAY/PAUSE (12) will alternately play or pause the selected track

PREVIOUS TRACK (11) will step backwards through tracks

Holding the PREVIOUS TRACK button will reverse seek through the current track

NEXT TRACK (13) will step forwards through tracks

Holding the NEXT TRACK button will forward seek through the current track

USB/SD will toggle between USB or SD/MMC card media playback

REPEAT will select between repeating  track or  tracks

Busker User Manual

FM Tuner

In FM tuner mode, the station frequency (in MHz) will be displayed.

For initial setup, press PLAY/PAUSE to begin the auto-tuning process.

The tuner will seek through all frequencies for strong signal reception (i.e. radio stations)

These will be stored into memory as , , , … etc.

Stored stations can then be selected using the PREVIOUS or NEXT buttons

Note: Pressing PLAY/PAUSE during auto-tune will allow manual tuning via PREVIOUS/NEXT

Bluetooth™ Connection

Select ‘’ using the mode button (9). The Bluetooth™ symbol will be flashing if it is NOT

paired with an audio device.

Scan for Bluetooth™ devices on your phone or other Bluetooth enabled audio player and check

for a device called ‘bt-speaker’. Select this device and opt to connect your Bluetooth device,

which should then state that it is connected to “bt-speaker” for audio output.

The Bluetooth™ symbol on the Busker unit should stop flashing to confirm the connection.

Play audio from your Bluetooth™ device and check for output through the Busker unit.

If there is no output, check if there is more than one device within range called “bt-speaker”

In the eventuality that more than one device is called “bt-speaker”, try each device in turn

until the Busker is found. Check also that the volume level is turned up on the sending device.

Once audio is playing through the Busker from Bluetooth, adjust the MEDIA volume control (7)

to the required volume.

Bluetooth on the Busker can only pair to a single device at any one time and should be

operable over a range of 5 to 8 metres.

Busker User Manual

Specifications

Model

BUSKER-12

BUSKER-15

Power supply

230Vac, 50Hz (IEC)

Output power

80W

100W

Frequency response

50Hz - 16kHz

SPL @ 1W/1m

94dB

96dB

Main driver

300mmØ (12“)

380mmØ (15“)

Impedance : loudspeaker

4 Ohms

HF driver : type

Compression driver

Wireless microphone frequencies

174.1MHz + 175.0MHz

Battery life

Up to 6 hours

Recharge time

8 hours

Battery type

7Ah rechargeable sealed lead-acid

Controls : front panel

VHF mic volume A + B, Media volume,

Media transport controls

Controls : rear panel

Guitar volume, Echo, Wired mic volume,

Bass, Treble, Master

Inputs

2 wired mic (jack), instrument (jack), aux

(RCA & 3.5mm)

Line output

RCA

Bluetooth version

2.1

Dimensions

590 x 375 x 325mm

720 x 470 x 450mm

Weight

12.0kg

14.5kg

Busker User Manual

Troubleshooting

No output and no LEDs lit

Check POWER switch is on

Check battery is not drained fully

Check mains lead is connected

Check mains or D.C. fuse hasn’t blown

Power LED lit but no VHF

output

Check 9V batteries in wireless transmitters

Check wireless transmitters are switched on

Check that handheld transmitters are not switched to MUTE

Check VHF VOLUME is not turned down

Check RF A and RF B LEDs for radio signal

Music level cutting out

Check TALKOVER is not switched on (will mute on mic. signal)

Power LED lit but no

media player output

Check USB/SD/MMC has mp3 or wma audio file format

Check MEDIA VOLUME is not turned down

No Bluetooth output

Check volume output level on sending device

Check sending device is connected to the receiver correctly

No sound from external

inputs

Check leads are OK and connected properly

Check MASTER, GUITAR or MIC VOL controls are turned up

Disposal: The “Crossed Wheelie Bin” symbol on the product means that the product is classed as Electrical or

Electronic equipment and should not be disposed with other household or commercial waste at the end of its useful life.

The goods must be disposed of according to your local council guidelines.

Errors and omissions excepted.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Qtx Sprecher Handbücher

Beliebte Sprecher Handbücher anderer Marken

argon audio

argon audio IE20 Bedienungsanleitung

Denon

Denon SC-N7 Bedienungsanleitung

Gemline

Gemline Ace 3952 Bedienungsanleitung

Focal

Focal ON WALL 300 Bedienungsanleitung

HEADRUSH

HEADRUSH Maximus HRSP 5024 Bedienungsanleitung

SoundLogic

SoundLogic BCCS-6/6395 Bedienungsanleitung

Peavey

Peavey DTH 218 Bedienungsanleitung

Avantree

Avantree Pluto Air Bedienungsanleitung

Morel

Morel Integra Series INTEGRA OVATION 4 Bedienungsanleitung

Oppo

Oppo SONICA Bedienungsanleitung

Bose

Bose SoundLink Wireless Music System Bedienungsanleitung

Rocksteady

Rocksteady Stadium Bedienungsanleitung

Bowers & Wilkins

Bowers & Wilkins 4 Bedienungsanleitung

Sonance

Sonance SONOS OUTDOOR Series Bedienungsanleitung

Electro-Voice

Electro-Voice EVID FM4.2 Bedienungsanleitung

Pioneer

Pioneer XW-HTD630 Bedienungsanleitung

Onn

Onn BWA16AA002 Bedienungsanleitung

HP GL313AA - USB Speakers PC Multimedia Bedienungsanleitung