Quick BK2 Series Bedienungsanleitung
EN INSTALLATION AND USER'S MANUAL
BK2 WATER HEATER
BK2 SERIES WATER HEATER WITH SINGLE AND
DOUBLE ELECTRIC ELEMENTS
160 - 200
REV 001A
BK2 EN
INDEX
INSTALLATION AND USER'S MANUAL - QUICK BK Series WATER HEATER - REV000A
1 - Information about the product ....................................................................................................................... 4
1.0 - Model code .........................................................................................................................................................4
2 - Supply and equipment .................................................................................................................................... 5
2.0 - Standard supply and material included in the package .....................................................................................5
3 - Introduction ..................................................................................................................................................... 5
3.0 - Important notes ..................................................................................................................................................5
3.1 - Precautions .........................................................................................................................................................5
3.2 - Precautions for the installer ...............................................................................................................................5
4 - Installation / Use.............................................................................................................................................. 6
4.0 - Installation requirements....................................................................................................................................6
4.1 - Installation procedure.........................................................................................................................................6
4.2 - Use ...................................................................................................................................................................... 6
4.2.0 - Power supply of the equipment ......................................................................................................................6
4.2.1 - Thermostat setting...........................................................................................................................................8
5 - Wiring diagram ................................................................................................................................................ 9
6 - Maintenance.................................................................................................................................................. 10
7 - Product disposal............................................................................................................................................ 11
8 - Dimensions .................................................................................................................................................... 11
BK2
EN
BK 200 40 S T D
4
INSTALLATION AND USER'S MANUAL - QUICK BK Series WATER HEATER - REV000A
QUICK®RESERVES THE RIGHT TO MODIFY THE TECHNICAL CHARACTERISTICS OF THE EQUIPMENT AND THE CONTENTS
OF THIS MANUAL WITHOUT PRIOR NOTICE. IN CASE OF DISCORDANCE OR ERRORS IN TRANSLATION BETWEEN THE
TRANSLATED VERSION AND THE ORIGINAL TEXT IN THE ITALIAN LANGUAGE, REFERENCE WILL BE MADE TO THE ITALIAN
TEXT.
NAUTIC WATER HEATER
Our long experience in the nautical sector has enabled us to develop a series of water heaters with innovative
features compared to the market standard. The advantages that Quick®nautic water heaters offer are:
• High-quality materials ensuring durability and resistance over time.
• Heat exchanger with a large exchanging surface.
• Possibility of producing hot water even with the electric element, complete with adjustable and safety thermostat
(in models equipped with it).
• Relief/non-return valve that allows the water heater to drain the water when not in use.
• Easy installation on a at area.
1.0 - Model code
MODELS BK 160 BK 200
TANK CAPACITY
Litres
160 200
US gallon 42.27 52.84
Tank material Stainless steel 316 L
Thermal insulation material Polyurethane foam
External cladding material PVC
Tank pressure during testing 600 kPa
(1)
Maximum working pressure 1000 kPa
(1)
Electric element voltage rating
(2)
230 Vac ± 10% - 400 Vac ± 10%
Electric element power rating
(2)
2 KW [Model 02] - 4 KW [Model 04] –/D
Fittings diameter 3/4” - [1” exchanger]
Weight
(3)
Kg 30 35
Lb 66 77
(1) 1 Bar = 100 kPa •(2) Available upon request: 110 Vac ± 10%,1200W •(3) With empty equipment •
SERIES NAME
TANK
CAPACITY
(l)
HEAT
EXCHANGER
ELECTRIC
ELEMENT:
SINGLE (-)
DOUBLE (D)
ELECTRIC
ELEMENT POWER
(KW) ELECTRIC ELEMENT
VOLTAGE:
INSTALLED (T)
NOT INSTALLED (-)
1 - Information about the product
BK2 EN
BK2
5
INSTALLATION AND USER'S MANUAL - QUICK BK Series WATER HEATER - REV000A
2.0 - Standard supply and material included in the package
• Water heater
• Floor or wall-mounting brackets (optional)
• Various screws and hardware (for assembly)
• User’s manual
• Conditions of warranty.
2 - Supply and equipment
3 - Introduction
BEFORE USING THE PRODUCT, PLEASE READ THIS USER’S MANUAL CAREFULLY. IF IN DOUBT, PLEASE CONSULT YOUR
QUICK®DEALER.
3.0 - Important notes
This manual features Warning and/or Caution symbols that are important for safety.
Please follow the instructions provided.
Warning symbol for dangerous
situations.
Caution symbol to prevent direct or
indirect damage to the product.
This document provides boat manufacturers and nautical equipment installers with instructions on how to
assemble the water heater and operate it correctly.
3.1 - Precautions
• Use the product only for the applications described in this manual.
• Do not use these products for any other type of operation.
• Quick®shall not be held liable for direct or indirect damage caused by improper use of the product.
• Before connecting the equipment, make sure that cables are not live.
• This equipment is not intended for use by people (including children) with reduced physical, sensory
or mental capabilities. Quick®SpA shall not be held liable for direct or indirect damage caused by
improper use of the equipment.
• Never switch on the electric element if the product is not lled with water, otherwise the heating
element could be irreversibly damaged.
3.2 - Precautions for the installer
CARRY OUT THE INSTALLATION IN GOOD LIGHTING CONDITIONS.
It is advisable to wear suitable clothing and personal protective equipment (PPE).
The water heater is not suitable for installation in potentially explosive environments and/or
atmospheres.
Installation and subsequent inspection or repair work must only be carried out by qualied personnel.
CARRY OUT INSTALLATION/MAINTENANCE WORK MAKING SURE THAT THE PRODUCT IS
DISCONNECTED FROM THE ELECTRICAL SYSTEM.
Quick accepts no responsibility for inadequate connection of users to the electrical system and
inadequate safety of the electrical system.
BK2
EN
2
3
1
6
INSTALLATION AND USER'S MANUAL - QUICK BK Series WATER HEATER - REV000A
4.0 - Installation requirements
The water heater must be installed in a dry and well-ventilated place. This precaution is necessary, even if the
water heater is made of materials resistant to the marine environment, due to the presence of electrical devices
(in models equipped with them). In addition, installation in an unventilated place may cause condensation;
condensation may be mistaken for a false leak.
4.1 - Installation procedure
A - Apply the brackets to the tank (1).
B - Fix the water heater to a at surface as shown in gure 1 using supports suitable for the weight of the water
heater and the type of surface available for installation.
WARNING: the weight of the water heater indicated in the technical specications refers to empty
equipment. For the weight when fully loaded, add the weight of the mass of water lled in the
equipment to the weight when empty (1 litre of water corresponds to approximately 1 kg. / 2.2 lb).
C - Make the hydraulic connections for the tap hot water input and output and the engine cooling circuit to the heat
exchanger (in models featuring it) as shown in gure 2. The connection between the engine cooling circuit and the
water heater exchanger should be as short as possible.
WARNING: the overpressure release pipe must be positioned on a continuous downward slope and
in a place protected from ice formation.
WARNING: water may drip from the overpressure release pipe; leave this pipe open so that it can
drain the water in the atmosphere.
WARNING: use Loctite 243, 577 or Teon when installing the ttings.
Check that there are no water leaks.
4.2 - Use
WARNING: follow the engine manufacturer’s instructions to withdraw the coolant to be sent to the
water heater exchanger.
• Position the stub pipe (2) of the valve (1) securing it with the clamp (3). Position it in
such a way that any spillage of water will not damage other objects.
• Open the hot water taps of the washbasins and start the water pump. This allows
the air in the water heater and in the pipes to ow out. Close the taps as soon as only
water starts to ow out.
• Check that there is no leakage from the ttings.
4.2.0 - Power supply of the equipment
For connections to the AC network, see the wiring diagram on page 8. Before supplying power to the water heater,
make sure that its operating voltage corresponds to that supplied by the AC network.
A double pole switch must be installed in the electrical system to turn the equipment on and off and a fuse suitable
for its absorption. The insulation material between the contacts of the connections to the AC network must be at
least 3 mm. Connections to the AC network must be made in accordance with the national standards on electrical
systems.
Before connecting the equipment, make sure that cables are not live.
Never switch on the electric element if the water heater is NOT lled with water, otherwise the
heating element could be irreversibly damaged.
4 - Installation / Use
BK2 EN
7
INSTALLATION AND USER'S MANUAL - QUICK BK Series WATER HEATER - REV000A
FIG.1
FIG.2
HOT TAP WATER OUTPUT
HOT TAP
WATER
OUTPUT
HOT TAP WATER
OUTPUT
(vertical
installation only) HOT TAP
WATER
OUTPUT
COLD TAP WATER
INPUT
COLD TAP WATER
INPUT
COLD TAP WATER
INPUT
TAP WATER TANK
WATER PUMP
COLD WATER
HOT
WATER
EXPANSION TANK
4 - Installation / Use
BK2
EN
4
5
8
INSTALLATION AND USER'S MANUAL - QUICK BK Series WATER HEATER - REV000A
4.2.1 - Thermostat setting
The thermostat factory-set temperature value is 60°C.
If you wish to change this value, follow the procedure below:
SINGLE-PHASE
• interrupt the power supply.
• Remove the protection cover (4) to reach the thermostat (5) (g. 3).
• Use a screwdriver to turn the thermostat knob and set the desired temperature value (g.4).
• Ret the protection cover (4).
• Restore the power supply.
FIG.4
FIG.3
FIG.5
AC
NETWORK
NEUTRAL
AC
NETWORK
LIVE
TEMPERATURE
SETTING KNOB
RESET
BUTTON
THREE-PHASE
Turn the thermostat knob and set the desired value.
(g.5)
The thermostat regulates the water temperature only when operating with electric element.
4 - Installation / Use
BK2 EN
N L PE
L1 L3 L2 PE
2
3
3
2
11
Id Id
Id
Id
Id
Id
9
INSTALLATION AND USER'S MANUAL - QUICK BK Series WATER HEATER - REV000A
SINGLE-PHASE WIRING DIAGRAM
SINGLE-PHASE 2000 WATT CONNECTION
THREE-PHASE WIRING DIAGRAM
THREE-PHASE 4000 WATT CONNECTION
SINGLE ELECTRIC ELEMENT
DOUBLE ELECTRIC ELEMENT
SINGLE ELECTRIC ELEMENT
DOUBLE ELECTRIC ELEMENT
5 - Wiring diagram
BK2
EN
A
4
5
10
INSTALLATION AND USER'S MANUAL - QUICK BK Series WATER HEATER - REV000A
WARNING: Quick®water heaters are equipped with a double thermostat with manual reset that cuts
off the power supply in the event of too a high water temperature.
If this condition occurs, proceed as follows:
PROCEDURE for SINGLE-PHASE manual reset:
• Interrupt the power supply
• Remove the protection cover (4, g.6) to reach the thermostat.
• Use a screwdriver to turn the thermostat knob 5 (g. 7) and set the maximum temperature value.
• Press the reset button on the double thermostat (g.7).
• Use a screwdriver to turn the thermostat knob (g.7) and set the desired temperature value.
• Ret the protection cover (4).
• Restore the power supply.
ELECTRIC
ELEMENT
THREE-PHASE: The three-phase thermostat is provided with a manual reset device.
WARNING: if the overtemperature safety device is triggered repeatedly during the use of the water
heater, contact a quick®service centre.
WARNING: if the power cable is damaged, have it replaced at a Quick®service centre. To avoid
accidents, the equipment must only be opened by authorised personnel. The warranty will be void if
the equipment is opened by unauthorised personnel.
It is advisable to check the magnesium anode (A) every 12 months. Replace it if deteriorated. This
simple preventive maintenance guarantees a long equipment life over time.
During the cold season, if the water heater is not in use, it is advisable to empty it using the valve lever (9). This is to
avoid damage caused by frost.
Periodically check the hydraulic system ttings for leaks; check the tightness of the fastening screws and replace
them if they are worn out or corroded.
Periodically check the efciency of the electrical system.
TEMPERATURE
SETTING KNOB RESET
BUTTON
FIG.6 FIG.7
6 - Maintenance
Dieses Handbuch passt für folgende Modelle
2
Inhaltsverzeichnis
Andere Quick Boiler Handbücher
Quick
Quick BX 16 Bedienungsanleitung
Quick
Quick BX 16 Bedienungsanleitung
Quick
Quick B3 Leitfaden
Quick
Quick Boiler Square B 23 Bedienungsanleitung
Quick
Quick BX 16 Bedienungsanleitung
Quick
Quick B3 Bedienungsanleitung
Quick
Quick BX 15 Bedienungsanleitung
Quick
Quick SBC 1100 ADV PLUS FR Bedienungsanleitung
Quick
Quick B3 Bedienungsanleitung
Beliebte Boiler Handbücher anderer Marken
Kenmore
Kenmore 153.582400 Bedienungsanleitung
Applimo
Applimo Edel AIR Bedienungsanleitung
STIEBEL ELTRON
STIEBEL ELTRON Eltronom SHU 5 S Bedienungsanleitung
clage
clage E-Mini Series Bedienungsanleitung
Toyotomi
Toyotomi Oil Miser OM-180 Bedienungsanleitung
Bradford White
Bradford White EF Series Bedienungsanleitung
