Quivogne SCD Leitfaden

SCD

Operating, Maintenance

& Spare Parts Book

Tel: 01473 730 576

Fax: 01473 730 681

e-mail: [email protected]

web: www.quivogne.co.uk

Quivogne UK Ltd.

Fen Farm,

Washbrook,

Ipswich,

Suffolk.

IP8 3HE

MACHINE DETAILS

Model

Serial Number

Date Of Manufacture

TECHNICAL ADVICE FOR SAFETY

MACHINE DESIGNED FOR AGRICULTURAL USE

Please read the advice given below before starting to operate. This machine is designed

for agricultural use only. If used in a different capacity we will not be held responsible

and the user will be responsible for his own actions.

People using the machine must be advised of the dangers. Comply with accidental

protection notices, with work medical regulations with the road traffic regulations with the

European Community regulations "Agricultural Machine Instructions". Any technical

modification will be without the agreement of the manufacturer and we will not be held

liable for the risks.

GENERAL BASIC RULES - SAFETY INSTRUCTIONS - ACCIDENT PROTECTION

Before each working session please ensure that the machine and tractor are in good

working order.

1. Comply with the advice and safety instructions described in the operating book.

2. Read the stickers on the machine as they give important information.

3. Comply with safety instructions and the Road Traffic Regulations at the time of each

use.

4. Read the operating book carefully before using the machine.

5. Avoid wearing loose clothing near the machine as it could be caught on the PTO

shaft, rotors etc.

6. To avoid all risks of fire and premature corrosion keep the machine clean.

7. Make sure that no person stands near the machine before driving and working.

8. Never carry people on the machine. Do not stay on the machine in transport

position or when in working position.

9. Only use the equipment provided by the manufacturer to couple the machine.

10. Couple the machine on the tractor, raise the machine carefully to avoid risks of

accidents.

11. Always take into consideration the weight and width of the machine on the road.

12. Always set the lighting system, signal system and transport locks for road

transportation.

13. Leave the semi-automatic coupling ropes loose so as to avoid the release of the

locking system during transport.

14. Do not leave a moving tractor unattended. Stop the engine, disengage the PTO

shaft and put on the handbrake.

15. When you steer to couple the machine make sure the braking capacity is sufficient –

the braking is influenced by the weight of the machine coupled on the tractor.

16. In transport pay attention to the weight transfer when turning sharp corners and

other road obstacles.

17. Only use the machine when all the safety and protection requirements have been

followed.

18. Stop the machine immediately when someone arrives on or near the work area.

19. Put the machine on the ground, stop the engine, put the handbrake on and take the

key out of the tractor before leaving it.

20. Do not stand between the tractor and the machine if they are not completely

stabilized.

21. Do not use the machine if tired, under the influence of alcohol or on drugs.

22. Keep the reflective apparatus clean on the front and rear of machine.

MOUNTED MACHINE:

1. Make sure that the lifting system is working smoothly before coupling the machine

on the tractor linkage.

2. Make sure the linkage category of the machine is the same as that of the tractor.

3. Be careful when standing near the linkage system area. There are risks of crushing

and cutting.

4. Do not stand between the machine and the tractor during the coupling and when

you fit the top link.

5. Adjust the check chains of the linkage of the tractor to avoid excessive sway.

6. In transport lock the operating lever of the linkage.

7. Set the lighting apparatus, signal system and required precautions for transport on

the road.

8. Put on the safety pin and release the locking system in transport position.

9. Check the following regularly: axles, lynch pins, articulation pins, linkage bar.

SEMI MOUNTED & TRAILED MACHINES:

1. Make sure that the drawbar, turning link, fix link and hook is in good working order.

2. Check the connection to the tractor: linkage pins, hook, axles, pins etc.

3. Do not stand between the tractor and the machine at the time of coupling.

4. Never attach a trailed machine to the top link hitch point of the tractor

-SERIOUS RISK OF OVERTURNING

5. Regularly check and clean the hydraulic pipe connection, rams safety valves on the

road etc.

6. In transport put on the safety pins and release the locking system.

7. In transport close the safety valves of the lifting rams of the machine.

8. When transporting drive carefully on the road especially on sharp curves and on

bridges etc.

9. Set up lights, signal systems and transport locks for road transportation.

10. Do not uncouple the machine when on sloping ground. If necessary place a

securing block behind the wheel.

11. Before leaving the tractor uncouple the machine. Lay the machine on the ground or

on the support stand.

12. Open and close on a flat area with the tractor running at low revs.

MACHINE WITH HYDRAULIC EQUIPMENT:

1. Check the hydraulic kit, pipes, connections and valves are all in smooth working

order before use.

2. Read the setting up procedure before use as shown herewith.

3. Before use fill up the hydraulic circuit by moving the spool valve of the tractor.

4. Keep people away from the driving area and be careful with large unfolding

machines.

5. IMPORTANT - In transport close the safety valves of the rams.

6. On vertical and lateral folding machines put all release pins on.

7. Do not attempt to execute more than one operation at a time. Wait for one to finish

before starting another.

8. Carry out all the operations on a flat surface with the tractor running at low revs.

Leave the machine on a flat area.

PTO SHAFT:

1. Use the PTO shaft recommended by the manufacturer, which has a CE Mark.

2. Keep the guards and covers on the PTO Shaft.

3. At all times be careful with the PTO Shaft.

4. Never attach the PTO when the machine is lifted.

5. Lift the PTO Shaft to check that the guards move freely and cover the shaft.

6. IMPORTANT - Secure the chains of the PTO Shaft to ensure protection.

7. Before connecting the PTO Shaft make sure the RPM is the same as the machine.

8. When engaging the PTO Shaft ensure that no person is standing near the machine.

9. Never engage the PTO when the engine is a stopped or running at high rev.

10. Ensure that no person stands near the moving parts of the machine.

11. Do not allow hands, feet or any other part of the body near the moving parts of the

machine.

12 Disengage the PTO Shaft if the work becomes too much for the machine -

DO NOT OVERSTRAIN THE PTO.

13. Do not stand near the working machine even if the tractor PTO is disengaged

WAIT FOR ALL MOVING PARTS TO STOP.

14. Carry out maintenance, greasing, cleaning and all other necessary work when the

PTO Shaft is disconnected, the engine is stopped, the key away and the machine is

stabilized.

15. Position the disconnected PTO Shaft on supports in order to avoid damage when in

transport.

16. IMPORTANT - Always replace a broken or defective part by an original part, which

has a CE Mark.

MAINTENANCE:

1. Carry out all maintenance, greasing, cleaning and any other work on the machine

ONLY when the machine is stopped, stabilized, engine stopped, handbrake on and

key out.

2. Regularly check the bolts, linkage, link pin, articulation axles, wearing parts often.

Tighten them regularly and if necessary replace them with original parts.

3. For all work that needs to be carried out under the machine make sure the unit is

wedged and supported carefully to avoid the risk of crushing. Take care with all

parts that could fall or uncouple from the machine when this maintenance is being

carried out.

4. Wear gloves for all work that needs to be carried out on the machine. Be careful on

sharp edges.

5. Before undertaking greasing clean carefully the surplus grease and oil.

6. Before all welding operations on the machine when it is coupled with the tractor

disconnect the cables of the battery.

7. Always replace the wearing parts or damaged parts with original ones.

WARNING & INFORMATION STICKERS ON THE MACHINE

Before leaving the tractor for any operation on the machine, stop the engine and

wait for the complete stop of any moving parts

Before starting to operate the machine read the advice and safety instructions

given in the handbook. Before each use, check all the protection devices and

tightness of bolts.

Outlines the greasing instructions and frequency for tightening

bolts.

Indicates where grease nipples are located that need greasing.

Description

Code

Frame SSO00300

R clip GOU06000

Pin BRO36501

Pin Ø25X180 AXE25036

Beliebte Landwirtschaftliche Geräte Handbücher anderer Marken

GSi

GSi PNEG-2314 Bedienungsanleitung

Checchi & Magli

Checchi & Magli TEXDRIVE Bedienungsanleitung

Amazone

Amazone Cenius 4003-2TX Bedienungsanleitung

MASSEY FERGUSON

MASSEY FERGUSON MF 9313S Bedienungsanleitung

Cima

Cima BLITZ Bedienungs- und Wartungsanleitung

Amazone

Amazone CombiDisc 3000 Montageanleitung

HE-VA

HE-VA Disc-Roller XL Contour Bedienungsanleitung

AGT

AGT AGT-SSFM Bedienungsanleitung

Milestone

Milestone 72-84 Bedienungsanleitung

KUHN

KUHN Hector 3000 Bedienungsanleitung

Krone

Krone X-Disc 6200 Bedienungsanleitung

Eliet

Eliet DZC450 Bedienungsanleitung

Taarup

Taarup BIO+ B4000 Bedienungsanleitung

Garland

Garland SHAKER 310 DPG Bedienungsanleitung

stable comfort

stable comfort StableWall System Bedienungsanleitung

Raven

Raven AccuBoom Bedienungsanleitung

International

International 710 Bedienungsanleitung

Ashland

Ashland HDW-3217-14 Bedienungsanleitung