R.V.R. Elettronica RXRL-NV Bedienungsanleitung

TECHNICAL AND MAINTENANCE MANUAL

MANUALE TECNICO E DI MANUTENZIONE

Manufactured by R.V.R. Elettronica - Italy

RXRL-NV

RXRL-NV Technical and Maintenance Manual

R.V.R. Elettronica S.r.l. (Bo) Pag. 2

RXRL-NV

STUDIO TRANSMITTER LINK 200/

1100MHz

Technical and Maintenance Manual

Manuale Tecnico e di Manutenzione

English Pag. 3

Italiano Pag. 49

RXRL-NV Technical and Maintenance Manual

R.V.R. Elettronica S.r.l. (Bo) Pag. 3

INDEX

Preliminary Instructions and Warranty Information Pag. 5

Safety Regulations Pag. 7

SECTION 1

General Description Pag. 10

Technical Specifications (Table A) Pag. 12

Dimensional & Environmental Specifications (Table B) Pag. 13

CHAPTER 2

Electrical Description Pag. 14

Front Panel View Description Pag. 17

Front Panel View (Fig.1) Pag. 20

Rear Panel View Description Pag. 21

Rear Panel View (Fig.2) Pag. 23

Top View Description Pag. 24

Top View (Photo 1) Pag. 25

Block Diagram (Fig.3) Pag. 26

CHAPTER 3

Installation Procedures Pag. 27

Recommended Test Equipment (Table C) Pag. 30

CHAPTER 4

Maintenance Pag. 31

CHAPTER 5

Calibration Procedure of Modules Pag. 35

CHAPTER 6

Alignement of the Radio Link Pag. 43

APPENDIX A

Circuit Diagrams, Layouts and Bill of Meterials Pag. 95

RXRL-NV Technical and Maintenance Manual

R.V.R. Elettronica S.r.l. (Bo) Pag. 4

Card Connections Pag. 96

Power Supply Pag. 97

Muting Card Pag. 102

C.P.U. Pag. 106

Modmeter Card Pag. 116

Anameter Card Pag. 121

P.L.L. Card Pag. 129

V.C.O. Card Pag. 141

I.F. 70MHz Card Pag. 146

Front End & Mixer Pag. 152

Inverter Card Pag. 159

U.S.A. Input Audio Card (Optional) Pag. 163

Mono-Balanced Card (Optional) Pag. 167

RXRL-NV Technical and Maintenance Manual

R.V.R. Elettronica S.r.l. (Bo) Pag. 5

PRELIMINARY INSTRUCTIONS AND WARRANTY INFORMATION

WARNING: This equipment is a "CLASS A" equipment. In a residential place

this equipment can cause hash. In this case can be requested to user to

take the necessary measures.

Please observe safety precautions when handling this unit. This equipment

contains dangerous currents and high voltages.

This manual is written as a general guide for those having previous

knowledge and experience with this kind of equipment. It is not intended

to contain a complete statement of all safety warnings which should be

observed by personnel in using this or other electronic equipment.

R.V.R. doesn’t assume responsibility for injury or damage resulting from

improper procedures or practices by untrained/unqualified personnel in

the handling of this unit.

Please observe all local codes and fire protection standards in the

operations of this unit.

CAUTION: always disconnect power before opening covers or removing any

part of this unit. Use appropriate grounding procedures to

short out capacitors and high voltage points before servicing.

Any damage to the goods must be reported to the carrier in writing on

the shipment receipt.

Any discrepancy or damage discovered subsequent to delivery, shall be

reported to R.V.R. within five (5) days from its receipt.

R.V.R. extends to the original end-user purchaser all original

manufacturers warranties which are transferable and all claims are to

be made directly to R.V.R. per indicated procedures.

All manufacturers warranties will be supported by R.V.R. to ensure

precise and speedy service where possible.

R.V.R. shall not be liable for any damage of whatsoever nature, arising

out of or in connection with the product or its use thereof.

R.V.R.'s warranty shall not include:

1) Re-shipment of the unit to R.V.R. for repair purposes

2) Any unauthorized repair/modification

3) Incidental/consequential damages as a result of any defect

4) Nominal non-incidental defects

5) Re-shipment costs or insurance of the unit or replacement

units/parts

Warranty shall come into force from invoice date and for the period of

the manufactures warranty.

RXRL-NV Technical and Maintenance Manual

R.V.R. Elettronica S.r.l. (Bo) Pag. 6

The warranty for a period of 12 months is referred to any R.V.R. product,

while for products as transistors, Mos-Fet and tubes of the final stages

is applied the manufacture's warranty of these devices.

To claim your rights under this warranty:

a. Contact the dealer or distributor where you purchased the unit.

Describe the problem and ask if he has an easy solution. Dealers

and Distributors are supplied with all the information about

problems that may occur and usually they can repair the unit quicker

than what the manufacturer could do. Very often installing errors

are discovered by dealers.

b. If your dealer cannot help you, contact R.V.R. in Bologna and explain

the problem. If it is decided to return the unit to the factory,

R.V.R. will mail you a regular authorization with all the necessary

instructions to send back the goods.

c. When you receive the authorization, you can return the unit. Pack

it carefully for the shipment, preferably using the original packing

and seal the package perfectly. The customer always assumes the

risks of loss (i.e., R.V.R. is never responsible for damage or loss),

until the package reaches R.V.R. premises. For this reason, we

suggest you to insure the goods for the whole value. Shipment must

be effected C.I.F. (PREPAID) to the address specified by R.V.R.’s

service manager on the authorization.

DO NOT RETURN UNITS WITHOUT OUR AUTHORIZATION AS THEY WILL BE

REFUSED.

Be sure to enclose a written technical report where mention all the

problems found and a copy of your original invoice establishing the

starting date of the warranty.

Replacement and warranty parts may be order from the following address.

Be sure to include the equipment model and serial number as well as part

description and part number.

R.V.R. Elettronica S.r.l. - Broadcasting Equipment -

Via del Fonditore, 2/2c

40138 Bologna - Italy

R.V.R. reserves the right to modify the design and specifications of the

equipment in this manual without previous notice.

RXRL-NV Technical and Maintenance Manual

R.V.R. Elettronica S.r.l. (Bo) Pag. 7

WARNING!

The currents and voltages in this equipment are dangerous!

Personnel must at all times observe safety regulation!

This manual is intended as a general guide for trained and qualified

personnel who are aware of the dangers inherent in handling potentially

hazardous electrical and electronic circuits.

It is not intended to contain a complete statement of all safety

precautions which should be observed by personnel in using this or other

electronic equipment.

The installation, operation, maintenance and service of this equipment

involves risks both to personnel and equipment, and must be performed

only by qualified personnel exercising due care.

R.V.R. ELETTRONICA S.r.l. shall not be responsible for injury or damage

resulting from improper procedures or from the use of improperly trained

or inexperienced personnel performing such tasks.

During installation and operation of this equipment, local building codes

and fire protection standards must be observed.

WARNING!

Always disconnect power before opening covers,

doors, enclosures, gates, panels or shields.

Always use grounding sticks and short out high

voltage points before servicing. Never make

internal adjustments, perform maintenance or

service when alone or when fatigued.

Do not remove, short-circuit or tamper with interlock switches on access

covers, doors, enclosures, gates, panels or shields.

Keep away from live circuits, know your equipment and don’t take chances.

WARNING!

In case of emergency ensure that power has been disconnected

RXRL-NV Technical and Maintenance Manual

R.V.R. Elettronica S.r.l. (Bo) Pag. 8

Treatment of electrical Shock

1) If victim is not responsive follow the A-B-C's of basic life support.

PLACE VICTIM FLAT ON HIS BACK ON A HARD SURFACE

A AIRWAY B BREATHING

IF UNCONSCIOUS, IF NOT BREATHING,

OPEN AIRWAY BEGIN ARTIFICIAL

BREATHING.

LIFT UP NECK, TILT HEAD,

PUSH FOREHEAD BACK, PINCH NOSTRILS,

CLEAR OUT MOUTH IF NECESSARY, MAKE AIRTIGHT SEAL,

OBSERVE FOR BREATHING 4 QUICK FULL BREATHS.

REMEMBER MOUTH TO MOUTH

RESUSCITATION MUST BE

COMMENCED AS SOON AS

POSSIBLE.

C CIRCULATION

CHECK CAROTID PULSE DEPRESS STERNUM 1 1/2" TO 2"

IF PULSE ABSENT, APPROX. 80 SEC. : ONE RESCUER, 15 COMPRESSIONS,

BEGIN ARTIFICIAL 2 QUICK BREATHS.

CIRCULATION

APPROX. 60 SEC. : TWO RESCUERS, 5 COMPRESSIONS,

1 BREATH

NOTE: DO NOT INTERRUPT RHYTHM OF COMPRESSIONS

WHEN SECOND PERSON IS GIVING BREATH.

Call for medical assistance as soon as possible.

2) If victim is responsive:

a. Keep them warm.

b. Keep them as quiet as possible.

c. Loosen their clothing (a reclining position is recommended).

RXRL-NV Technical and Maintenance Manual

R.V.R. Elettronica S.r.l. (Bo) Pag. 9

FIRST-AID

Personnel engaged in the installation, operation, maintenance or

servicing of this equipment are urged to become familiar with first-aid

theory and practices. The following information is not intended to be

a complete first-aid procedure, it is brief and is only to be used as

a reference. It is the duty of all personnel using the equipment to be

prepared to give adequate Emergency First Aid and thereby prevent

avoidable loss of life.

Treatment of electrical Burns

1) Extensive burned and broken skin.

a. Cover area with clean sheet or cloth.

(Cleansed available cloth article).

b. Do not break blisters, remove tissue, remove adhered particles

of clothing, or apply any salve or ointment.

c. Treat victim for shock as required.

d. Arrange transportation to a hospital as quickly as possible

e. If arms or legs are affected keep them elevated.

NOTE

If medical help will not be available within an hour and the victim

is conscious and not vomiting, give him a weak solution of salt and

soda: 1 level teaspoonful of salt and 1/2 level teaspoonful of baking

soda to each quart of water (neither hot or cold).

Allow victim to sip slowly about 4 ounces (half a glass) over a period

of 15 minutes.

Discontinue fluid if vomiting occurs (Do not give alcohol).

2) Less severe burns - (1st & 2nd degree)

a. Apply cool (not ice cold) compresses using the cleansed available

cloth article.

b. Do not break blisters, remove tissue, remove adhered

particles of clothing, or apply salve or ointment.

c. Apply clean dry dressing if necessary.

d. Treat victim for shock as required.

e. Arrange transportation to a hospital as quickly as possible.

f. If arms or legs are affected keep them elevated.

RXRL-NV Technical and Maintenance Manual

R.V.R. Elettronica S.r.l. (Bo) Pag. 10

SECTION 1

GENERAL DESCRIPTION

1.1 MECHANICAL DESCRIPTION

The RXRL-NV is housed in a 2U, 19" rack-mounting chassis comprising

a number of interconnected modules mounted internally on the base of the

unit.

This allows easy removal and replacement of each module.

The audio output level controls (Mono and Stereo) and meters for various

operating parameters are situated on the front panel.

Mains power, II° I.F. Monitoral Output, R.F. input connectors are mounted

on the rear panel.

1.2 ELECTRICAL DESCRIPTION

The RXRL-NV is a hight quality, broadband, FM receiver with a

harmonic distortion better than 0.2%.

The receiver is microprocessor-controlled and synthesized with steps of

100KHz in the 200-1100MHz band.

Furthermore, a 15Hz low-pass filter is provided which may be inserted

in the MONO or MPX output.

1.3 METERS AND INDICATORS

The receiver’s operating parameters can be measured with the analog

multimeter (21 Fig.1) and the led bar-graph display (18 Fig.1) situated

on the front panel.

The measurament being made by the analog multimeter is indicated by a

led indicator (8 Fig.1) and selectable via the corresponding control

(20 Fig.1).

Peak deviation can be measured with the bar-graph display in steps of

5KHz.

The five-figure display (22 Fig.1), mounted centrally, indicates the

operating frequency selected by the UP (14 Fig.1) and DOWN (12 Fig.1)

controls and saveable with the ENTER (13 Fig.1) control.

Three leds provide indication of VCO locked (10 Fig.1), the presence of

a stereo signal (9 Fig.1) and the presence of an SCA

signal (11 Fig.1) if the optional decoder is fitted.

1.4 REMOTE FREQUENCY CONTROL

The RXRL-NV attains frequency lock within a maximum of 30 seconds

after power-up.

An optional serial port (9 pin D-type) is available allowing remote

control of operating frequency and audio muting.

Andere R.V.R. Elettronica Industrieanlagen Handbücher

R.V.R. Elettronica

R.V.R. Elettronica URP Bedienungsanleitung

R.V.R. Elettronica

R.V.R. Elettronica HC5-10 Bedienungsanleitung

R.V.R. Elettronica

R.V.R. Elettronica SDC100 Bedienungsanleitung

R.V.R. Elettronica

R.V.R. Elettronica URPT/MIC Bedienungsanleitung

R.V.R. Elettronica

R.V.R. Elettronica HC4 Bedienungsanleitung

R.V.R. Elettronica

R.V.R. Elettronica VJ3000 Bedienungsanleitung

R.V.R. Elettronica

R.V.R. Elettronica TEX300LCD Bedienungsanleitung

R.V.R. Elettronica

R.V.R. Elettronica TRDS4001 Bedienungsanleitung

R.V.R. Elettronica

R.V.R. Elettronica TEX150-LCD/S Bedienungsanleitung

R.V.R. Elettronica

R.V.R. Elettronica PTRL-NV/S3 Bedienungsanleitung

R.V.R. Elettronica

R.V.R. Elettronica SDC2000 Bedienungsanleitung

R.V.R. Elettronica

R.V.R. Elettronica TCP/IP-INT-PTX Bedienungsanleitung

R.V.R. Elettronica

R.V.R. Elettronica TELINK-SNMP1 Bedienungsanleitung

R.V.R. Elettronica

R.V.R. Elettronica TEX150 Bedienungsanleitung

R.V.R. Elettronica

R.V.R. Elettronica IBJECT12K10A Bedienungsanleitung

R.V.R. Elettronica

R.V.R. Elettronica PJ250-NV Bedienungsanleitung

R.V.R. Elettronica

R.V.R. Elettronica PJ5KPS Bedienungsanleitung

R.V.R. Elettronica

R.V.R. Elettronica PTX30 UHT/S3 Bedienungsanleitung

R.V.R. Elettronica

R.V.R. Elettronica PTRL-NV/2/S3 Bedienungsanleitung

R.V.R. Elettronica

R.V.R. Elettronica RXRL-NV/2 Bedienungsanleitung

R.V.R. Elettronica

R.V.R. Elettronica PJ3500M-C Bedienungsanleitung

R.V.R. Elettronica

R.V.R. Elettronica PJ20KPS-C Bedienungsanleitung

R.V.R. Elettronica

R.V.R. Elettronica VJ2000 Bedienungsanleitung

R.V.R. Elettronica

R.V.R. Elettronica SDC20 Bedienungsanleitung

Beliebte Industrieanlagen Handbücher anderer Marken

ABB

ABB Unifix AD Handbuch

Mark 7

Mark 7 Evolution Bedienungsanleitung

Husky

Husky HyPET Bedienungsanleitung

bora

bora PM-1800 Bedienungsanleitung

Grizzly

Grizzly T32428 Bedienungsanleitung

Siemens

Siemens 8MF1 Series Bedienungsanleitung

ABB

ABB HT610965 Bedienungsanleitung

ABB

ABB SafeLink Bedienungsanleitung

Phoenix

Phoenix PHX-150 Bedienungsanleitung

ABB

ABB A165-L32 Bedienungsanleitung

ABB

ABB HT842936 Bedienungsanleitung

Hermetica

Hermetica 10 Series Bedienungsanleitung

HORNER

HORNER OEE Solution Bedienungsanleitung

Hammerhead

Hammerhead HG375 Bedienungsanleitung

SCHUNK

SCHUNK VERO-S NSE-A3 138 Gebrauchsanweisung

ABB

ABB HT566657 Bedienungsanleitung

Webasto

Webasto GSE CAN Bedienungsanleitung

ABB

ABB HT614003 Bedienungsanleitung