R82 Multi Frame:x Betriebsanleitung
2017-03 rev. 03
R82 A/S Parallelvej 3 DK - 8571 Gedved
support.R82.org
Page 1 of 3
Pre-sales information
Multi Frame:x
User information appropriate for
use by people with visual, reading
or cognitive disability
The latest version of all instructions are always available on the R82
website support.R82.org and can be printed in larger sizes
Information available in pictogram
The instructions are made as pictograms
Intended use and intended
environment including standard
options
The Multi Frame:x is a wheelchair base for customized seating systems.
Both users and care-givers benefit from the many built-in functions and
simple adjustment possibilities. The Multi Frame:x is suitable for users
needing an individual seating system and base, e.g. children with CP,
GMFCS level 3-5.
Different settings for the height and rear wheels ensure proper
positioning and center of gravity.
The Multi Frame:x comes in one size and is ideal for both indoor and
out-door use.
If mounted with seat and labeled transport fittings the Multi Frame:x can
be used for forward facing transport in motor vehicles with approved 4
point strap-type tiedown system and approved 3 point belt. For
transportation the Multi Frame:x is suitable in the load range of 43 kg to
specified max load for transportation.
Maintenance instructions
Maintenance of a medical device is wholly the responsibility of the owner
of that device. Failure to maintain a device in accordance with the
instructions may invalidate the device’s warranty. Furthermore, failure to
maintain a device may compromise the clinical condition or safety of
users and/or their caregivers.
Frequency
Description
Daily
- Use a dry cloth to clean the product
- Visual inspection. Repair or replace any damaged
or worn-out parts
- Ensure that all fasteners are in place and fitted
correctly
- Check all fittings and buckles for signs of worn out
parts
- Be aware of any max mark indications before
adjustment
Weekly
- Check that all castors are moving freely and that all
wheel locks/brakes are easily activated
- Wipe off any residue and dirt from the product
using a cloth with warm water and a mild
detergent/soap and dry before use
Monthly
Annually
- All nuts and bolt on this product must be checked and
tightened to avoid unnecessary failures
- Oil the swing-away parts. We recommend you use
a professional lubricant system
- The product has to be checked and tightened by a
qualified technician at least every 12 months to
avoid failures.
- Inspect the frame for cracks or signs for worn-out
parts and carry out annual service. Never use a
product which appears to be substandard or faulty
Cleaning description
This product can be washed for 15-20 minutes at 60°C, using a mild
2017-03 rev. 03
R82 A/S Parallelvej 3 DK - 8571 Gedved
support.R82.org
Page 2 of 3
Pre-sales information
Multi Frame:x
detergent or disinfection without chlorine, in a machine designed for
medical devices. Equipment shall be disassembled as necessary to
allow access of the detergent solution to all parts. Equipment
components and utensils shall be scrapped or rough cleaned to remove
food particle accumulation. Please allow the product to dry before reuse.
Disinfection description
The product can be disinfected with a 70% disinfectant solution. It is
recommended to wipe off any residue and dirt from the upholstery, using
a cloth with warm water and a mild detergent/soap without chlorine and
let it dry before disinfection.
Dimensions
http://www.R82.org - Select product or click here
Mass
http://www.R82.org - Select product or click here
Mass of test dummy is 100 kg (EN12183).
Maximum slope
http://www.R82.org - Select product or click here
Type(s) of tyres
12½”, 20”, 22” or 24” rear wheels.
6” or 7” front wheels.
Either as solid or pneumatic tyres
Used in combination with other
products
Can be used in combination with
•Panda Futura 5 seat
•x:panda seat 4S, 4M, 4L
General combination scheme available at http://www.r82.org/support -
Select Chart transport overview or click here
Conformity
The product conforms to standard EN12183 including requirements and
test methods for static, impact and fatigue strengths (ISO 7176-8)
Resistance to ignition
N/A
Warning about dangerous
combinations
The CE mark must be removed when rebuilding the product, when used
in combination with a product from another manufacturer or when using
other than original R82 spare parts and fittings.
List of accessories, detachable
parts and materials
http://www.R82.org - Select product or click here
Programmable controller
information
N/A
Operator control adjustments
Manual
Folding and dismantling
The push brace on Multi Frame:x can be folded down and make the
frame smaller.
1) If mounted, dismount the seat
2) Pull the red knob on the back of the frame to disconnect the gas strut.
The push brace will loosen and can be folded forward over the frame.
When folding, please be careful not to squeeze fingers
Used in motor vehicles
The Multi Frame:x complies with ISO 7176-19, for safe transportation in
motor vehicles. Detailed information about configurations for frames and
seat, max. load/user weight and transportation can be found here
The user should transfer to the vehicle seat and use the vehicle-installed
2017-03 rev. 03
R82 A/S Parallelvej 3 DK - 8571 Gedved
support.R82.org
Page 3 of 3
Pre-sales information
Multi Frame:x
restraint system whenever possible.
The product must be placed in a forward-facing position, when used as
a seat in a motor vehicle. Use an approved 4-point strap-type tiedown
system according to ISO 10542-2.
Use an approved 3-point belt according to ISO 10542-1 in the
wheelchair. Restraints should not be held away from the body by
wheelchair components such as armrests or wheels. It is not enough
ONLY to use a hip belt.
All accessories must be removed from the wheelchair and secured
separately in the vehicle. Accessories which can’t be removed, must be
secured to the wheelchair but positioned away from the user with
energy-absorbing padding placed between the accessories and the
user.
The product should be inspected by the dealer before reuse following
involvement in any type of vehicle collision.
The instructions on how to prepare the seat and frame, must be carried
through before transportation. Transport fittings must be mounted and
labelled as below before use for transportation in motor vehicles.
Ease of access to and manoeuvrability in, motor vehicles can be
significantly affected by size of device and turning radius, and the
smaller device and/or device with a shorter turning radius will generally
provide greater ease of vehicle access and manoeuvrability to a forward
facing position.
In accordance with ISO 7176-19 Annex D, the product is evaluated with
regard to the ability to accommodate vehicle-anchored pelvic and
shoulder belts.
The Multi Frame:x receives an overall score of “Good”.
Transport instructions (unoccupied)
Land and/or air
Sound power level
N/A
Andere Handbücher für Multi Frame:x
1
Andere R82 Rollstuhl Handbücher
R82
R82 Stingray Benutzerhandbuch
R82
R82 High-low:x Benutzerhandbuch
R82
R82 Flamingo Benutzerhandbuch
R82
R82 Combi Frame:x Bedienungsanleitung
R82
R82 Stingray seat Bedienungsanleitung
R82
R82 Strong Base Bedienungsanleitung
R82
R82 wombat basic Benutzerhandbuch
R82
R82 cheetah Bedienungsanleitung
R82
R82 Cougar Bedienungsanleitung
R82
R82 cheetah Benutzerhandbuch
R82
R82 892 Series Benutzerhandbuch
R82
R82 High-low:x Benutzerhandbuch
R82
R82 HIGH-LOW:V Bedienungsanleitung
R82
R82 Panda Futura Bedienungsanleitung
R82
R82 Cougar Bedienungsanleitung
R82
R82 Cougar Benutzerhandbuch
R82
R82 Multi Frame:x Bedienungsanleitung
R82
R82 Multi frame:x EN 12182 Bedienungsanleitung
R82
R82 High-low Benutzerhandbuch
R82
R82 Flamingo Benutzerhandbuch
