testing.
Medium
Suitable for all other testing.
Low
For less dynamic applications, such as steady state
speed measurement or coast-down testing.
DGNSS Mode
Sets the DGNSS mode.
Available modes are:
•None (default)
•SBAS
•RTCM
DGNSS Rate
This setting configures the DGNSS baud rate.
To make sure that VBOX 3iS receives the DGNSS
correction signal, you must set the correct DGNSS rate.
All Racelogic blue boxed radios use 115200 kbit/s,
and Satel grey boxed radios use either 19200 kbit/s or
38400 kbit/s.
Elevation mask
This setting lets you change the elevation mask, which is
selectable from 10 to 25°.
If the testing area has nearby trees or buildings, you
may benefit from increasing this value to reduce the
https://en.racelogic.support//Product_Info/Sensors/VBOX_3iS_Product_Range/VBOX_3iS_Single_Antenna/
VBOX_3iS_Single_Antenna_(v2)/User_Guide_-_VBOX_3iS_Single_Antenna_(v2)/03_Front_Panel_-
_VBOX_3iS_Single_Antenna_(v2)/3.1_GNSS_%E2%80%93_VBOX_3iS_Single_Antenna_(v2)_Settings
2
