5
Owner’s Manual: 5315
1784242 Rev X
ECO 18-0034
July 2018
www.radiaproducts.com (PHONE) 800-221-1083 | (INTL) +1-763-533-2969 | (FAX) 763-533-0015
WARNING!
DO NOT attempt to replace any damaged
electrical wire or components. Improper
replacement could result in electric
shock and serious injury. Only a qualified
service representative should attempt to
repair or replace any damaged electrical
components.
Review this owner's manual before installing or
operating.
The machine must be properly grounded prior
to use. In the case of an electrical short circuit,
grounding reduces the risk of electric shock
by providing an escape wire for the electric
current.
The machine’s power cord has a grounding
wire with an appropriate grounding plug.
This plug must be inserted into an electrical
outlet that is properly installed and grounded
according to all local codes and ordinances.
If you must repair or replace the power cord
or plug, DO NOT connect the grounding
wire to either flat-blade terminal. The wire
with insulation having an outer surface that
is green (with or without yellow stripes) is the
grounding wire.
Check with a qualified electrician if you don’t
completely understand these grounding
instructions, or if you are not sure whether
the machine is properly grounded. DO NOT
modify the plug provided; if it won’t fit in the
outlet, have a proper outlet installed by a
qualified electrician.
Disconnect the power cord before servicing,
cleaning, or removing any covers
Follow the lockout/tagout procedures of your
company.
DO NOT open the door until the machine
comes to a complete stop.
CAUTION!
Keep the work area free of clutter and
electrical cords.
Avoid extension cords. To minimize the
risk of improper electrical grounding,
extension cords are not recommended. If
an extension cord is unavoidable, consult a
qualified electrician to determine what type
of extension cord will satisfy the grounding,
current capacity, and other requirements of
the particular situation.
Use the proper power source. Refer to
the machine data plate on the right side
panel or the section 2.2, Specifications, in
this manual.
Keep customers away from the work area.
The machine should be used only by
properly trained individuals.
Clamp the can carefully to ensure that it is
held securely during the mixing cycle.
To avoid electric shock, don’t get the timer,
control panel, or wiring wet.
This machine is not explosion proof rated.
All containers must be properly sealed and
void of leaks.
Review product label, Material Safety Data
Sheet, and HMIS rating of materials prior to
mixing to determine potential hazards.
DO NOT use solvent-based cleaners or
thinners.
Use in a dry and well-ventilated environment
where dust and flammable vapors are not
present.
1.2 Safety Precaution Summary
Safety Information, Continued..
Product safety labels should be inspected and
cleaned periodically to maintain good legibility.
Replace any labels that are no longer legible.
WARNING: This product may
expose you to chemicals including
DEHP, which is known to the State of
California to cause cancer. For more
information, go to www.P65Warnings.
