Radial Engineering MR5 Bedienungsanleitung

Radial Engineering Ltd.

1588 Kebet Way, Port Coquitlam BC V3C 5M5

Tel: 604-942-1001 • Fax: 604-942-1010 • Email: [email protected]

MIDI CONVERTER

User Guide

Radial Engineering Ltd. MR5™ User Guide

MR5™MIDI CONVERTER

Introduction...................................................................................... 1

Features .......................................................................................... 2

Overview.......................................................................................... 3

Making Connections.....................................................................4-5

MIDI Setup....................................................................................... 6

OMNI Mode ..................................................................................... 6

MIDI Conguration Chart..............................................................7-9

Warranty ......................................................................... Back Cover

Thank you for purchasing the Radial MR5™, a useful tool that allows Radial JR5™ foot switch compatible devices to

respond to MIDI control signals.

Before using the MR5 for the rst time we suggest that you review this manual. It will explain what features and functions

can be controlled by MIDI control and program changes, along with channel selection and other conguration options.

Once you are done, if you nd yourself asking questions, please visit the FAQ page on our web site. This is where we post

questions and answers for players like yourself. Then, if you still nd yourself looking for more, we invite you to send us

an email at [email protected] and we will do our very best to reply in short order.

Radial Engineering Ltd. MR5™ User Guide

FEATURES

1. MIDI IN: Input jack for MIDI signals.

2. MIDI OUT: This jack is not currently used.

3. MIDI THRU: Thru-put for daisy chaining MIDI

signals.

4. AMPS: XLR jack to connect to amplier JR5

input on Radial device.

5. GUITARS: XLR jack to connect to instrument

JR5 input on Radial device.

6. DIP SWITCHES: Congure MIDI channel setup.

7. SAVE / RESET: Save MIDI conguration after

changing DIP switch position or reset if errors

such as stuck notes occur during a performance.

8. POWER / STATUS / MIDI LED’s: Let’s you know

the status of power and MIDI connections, and

shows when MIDI note ON/OFF signals are

present.

9. 14-GAUGE STEEL: I-Beam construction

prevents circuit board from being torqued which

could lead to part failure.

6 7 8 9

JR5 REMOTE

MR5

MIDI IN

AMP CONTROL

GUITAR CONTROL

MIDI THRU

JX44/JX42*MIDI DEVICE

*JX42 JR5 remote selects

instrument channel only

Radial Engineering Ltd. MR5™ User Guide

OVERVIEW

The MR5 is a translator that takes the MIDI data output from a controller or sequencer and converts the commands to the

JR5 footswitch language. This allows any Radial device that employs the JR5 to be integrated into MIDI controlled guitar

rigs, or be used in sequenced performances.

The Radial JR5 itself employs a proprietary interface that uses

standard XLR connectors. It is important to note that the reason

the JR5, or products like the JX44 or JX42, do not employ MIDI

is that the MIDI protocol is not designed to carry power. When

developing the interface for the JR5 remote, we wanted the power

to come from the device (example JX44) so that local power

would not be required. Furthermore, the XLR is a much more

robust connector than a typical 5-pin DIN and is readily available

from any PA company. It is also extendable which means that on

larger stages, you can simply connect two or more XLR cables

in line to achieve the required cable length.

Radial Engineering Ltd. MR5™ User Guide

MAkING CONNECTIONS

1. Connect the MIDI output from your MIDI

controller or pedal board to the input of the MR5

using a standard 5-pin MIDI cable. Additional

MIDI devices can be daisy chained via the

MR5’s MIDI THRU connector.

2. Connect the MR5 XLR outputs to the JR5 inputs

of the Radial JX44, JX42 or any other product

that employs a JR5 footswitch. The MR5 is

equipped with dedicated XLR outputs for both

‘Amps’ and ‘Guitars’. No power is required, as

the MR5 will derive its power from the Radial

device that you are controlling.

3. If you wish to use a JR5 footswitch in conjunction

with the MR5, simply connect one of its XLR

jacks to the MR5 and the other to the JR5 input

on your Radial device. The pedal will now be

in-line with the MR5, and your Radial device will

respond to commands from both.

MIDI CONTROLLER

MIDI CABLE

JX44

JX42

Instrument select only

MIDI XLR

Radial Engineering Ltd. MR5™ User Guide

Not only can the MR5 be used to control both JX44 and the JX42, the MR5 can also be used in conjunction with the JR5 remote

control. This allows a musician to still have their stage remote and have the MR5 send control messages to the JX44 or JX42

from a midi sequencer, or MIDI control pedals, or MIDI playback, from a MIDI track from back ground orchestration software.

This allows for incredible exibility for live performances to not just replace the JR5 remote as an option, but to augment and

add extra functionality to a full JR5 - JX44 - JX42 system.

AMPGUITAR

XLR

JX44

MIDI IN

MIDI THRU

Radial Engineering Ltd. MR5™ User Guide

MIDI SETUP

The MR5’s MIDI channel selection and conguration is

set via the 8 DIP switches on the side panel. It can be

setup to respond to an individual MIDI channel (1-16), or

put into OMNI mode to respond to messages sent on all

MIDI channels simultaneously. Once each switch is set to

its desired position, push the SAVE/RESET button on the

side panel to set the conguration as the changes will not

take affect until you do so. DIP switch details can be found

on the following pages.

OMNI Mode

OMNI Mode allows the MR5 to respond to control and

program changes on any MIDI channel (1-16). Setting

the MR5 to a specic channel is particularly useful when

linking multiple MIDI devices as they can all be set to only

respond to changes on their assigned channel. Some MIDI

equipment will default to OMNI mode when rst switched

on, so it is important to check congurations upon power-

up and re-select the channel on your device if necessary.

LED

The side panel is equipped with LED indicators to show you

the status of the MR5. The power LED indicates that the

MR5 is receiving power from your Radial device from the

JR5 connection. The STATUS LED illuminates when a midi

signal is being transmitted to the MR5. The MIDI indicator

shows when a midi device is connected to the MR5.

1 2 3 4 5 6 7 8

Select OMNI mode by setting DIP

5 in the up position

Radial Engineering Ltd. MR5™ User Guide

DIP switches 1-4:

These four switches select which MIDI channel (1-16) the MR5 will respond to. The guide below shows which position each

switch should be in for each corresponding channel.

DIP # 1 2 3 4

Midi Ch 1 UP UP UP UP

Midi Ch 2 DOWN UP UP UP

Midi Ch 3 UP DOWN UP UP

Midi Ch 4 UP UP DOWN UP

Midi Ch 5 UP UP UP DOWN

Midi Ch 6 UP DOWN UP DOWN

Midi Ch 7 DOWN UP DOWN UP

Midi Ch 8 DOWN DOWN UP UP

Midi Ch 9 UP UP DOWN DOWN

Midi Ch 10 UP DOWN DOWN UP

Midi Ch 11 DOWN UP UP DOWN

Midi Ch 12 DOWN DOWN UP DOWN

Midi Ch 13 DOWN UP DOWN DOWN

Midi Ch 14 UP DOWN DOWN DOWN

Midi Ch 15 DOWN DOWN DOWN UP

Midi Ch 16 DOWN DOWN DOWN DOWN

DIP switch 5:

This switch is used to select OMNI mode. When in the UP position, Omni mode is OFF and the MR5 will only respond to MIDI

messages on the channel selected with switches 1-4. When in the DOWN position, Omni mode is ON and the MR5 will respond

to MIDI messages sent on all channels.

Radial Engineering Ltd. MR5™ User Guide

DIP # 6 7

Amp PC DOWN UP

Amp CC UP DOWN

Amp PC and CC DOWN DOWN

GUITAR 1 GUITAR 2 GUITAR 3 GUITAR 4 Amp Out 1 Amp Out 2 Amp Out 3 Amp Out 4

CC 88 off 0..63/on 64..127 ON

CC 89 ON

CC 90 ON

CC 91 ON

CC 92 ON

CC 93 ON

CC 94 ON

CC 95 ON

MIDI IMPLEMENTATION CHART (CONT. NEXT PAGE)

The MR5 is setup to respond to both MIDI Control Changes and Program changes. Control changes can select both guitars and

individual ampliers on the JX44. Program changes are reserved for amplier selection only, which allows for custom congurations

with multiple ampliers on devices like the JX44. The following chart shows which instruments and ampliers will be activated

when the MR5 sees various Control and Program changes sent by your MIDI pedal board or sequencer:

DIP switches 6-7:

The amplier switching capability of the MR5 can be selected using MIDI Control

Changes, Program Changes, or both. Switches 6 and 7 select how the MR5 will

respond to these messages.

DIP switch 8:

No current function

Inhaltsverzeichnis

Andere Radial Engineering Medienkonverter Handbücher

Radial Engineering

Radial Engineering PROMS2 Bedienungsanleitung

Radial Engineering

Radial Engineering 8cx Bedienungsanleitung

Radial Engineering

Radial Engineering USB-Pro Bedienungsanleitung

Radial Engineering

Radial Engineering J+4 Bedienungsanleitung

Radial Engineering

Radial Engineering JD7 Injector Bedienungsanleitung

Radial Engineering

Radial Engineering OX8 Bedienungsanleitung

Radial Engineering

Radial Engineering Exo-Pod RAD-EXO-POD Bedienungsanleitung

Radial Engineering

Radial Engineering Decoder Bedienungsanleitung

Radial Engineering

Radial Engineering LX-2 Bedienungsanleitung

Radial Engineering

Radial Engineering JDI Mk3 Bedienungsanleitung

Beliebte Medienkonverter Handbücher anderer Marken

SoundTraxx

SoundTraxx Blunami BLU-2200 Bedienungsanleitung

SPROLINK

SPROLINK VA1 Bedienungsanleitung

Acclaim Lighting

Acclaim Lighting DDC-1-AC Bedienungsanleitung

Nikon

Nikon AF-S TC-20E III Bedienungsanleitung

Axis

Axis AXIS Q7406 Bedienungsanleitung

Omega

Omega TAC80B-J Bedienungsanleitung

Zoom

Zoom Thunderbolt TAC-2R Bedienungsanleitung

OST

OST iConverter 10/100M Bedienungsanleitung

Vertiv

Vertiv Netsure Bedienungsanleitung

birddog

birddog MINI Bedienungsanleitung

Roland

Roland GI-10 Bedienungsanleitung

Wallenstein

Wallenstein WX310 Bedienungsanleitung

Pace

Pace MSS 200-1 Bedienungsanleitung

Solar Converters

Solar Converters EQ 12/24-50 Bedienungsanleitung

CYP

CYP EL-7400V Bedienungsanleitung

TIE

TIE MIDI 1i1o Bedienungsanleitung

DCS

DCS Vivaldi Upsampler Bedienungsanleitung

Westermo

Westermo MCW-211 SERIES Bedienungsanleitung