Radio Shack PRO-89 Bedienungsanleitung

RadioShack and RadioShack.com are trademarks used

by RadioShack Corporation.

OWNER’S MANUAL —

Please read before using this equipment. 20-514 A

www.radioshack.comSM

RadioShack and RadioShack.com are trademarks used

by RadioShack Corporation.

PRO-89 200 Channel

VHF/Air/UHF/800MHz

Handheld Race Scanner

Two-Second Scan/Search Delay — Delays

scanning for 2 seconds before moving to

another channel, so you can hear more

replies.

Five Service Banks — Search preset

frequencies in separate fire/police, air, ham

radio,autorace,andmarinebanks,tomake

it easy to locate specific types of calls.

20 Monitor Memories — Temporarily

save up to 20 frequencies located

during a search, so you can move

selected frequencies to channel

storage later.

Ten Channel-Storage Banks — Storeup

to 20 channels in each of 10 different

banks, to group channels so you can

more easily identify calls.

!IMPORTANT !

If an icon appears at the end of a paragraph, go to the box on that page

with the corresponding icon for pertinent information.

o — Warning !— Important —Caution

Ó—Hint Ô—Note

Memory Backup — Keeps the channel

frequenciesstoredinmemoryforabout

1 hour during a power loss.

Triple Conversion Superheterodyne

Receiver — Eliminates interference

from intermediate frequency (IF)

images, so you hear only the frequency

you select.

HyperSearchand HyperScan—Set

the scanner to search at up to 50 steps

per second and scan at up to 25

channels per second, to quickly find

interesting transmissions.

Duplicate Frequency Check — Automatically notifies you if you are

about to store a frequency you have already stored, to help avoid

wasting storage space.

Direct Search — Search for new and unlisted frequencies starting

from a specified frequency.

Other features include:

Priority Channel — Designate a

channel to scan every two

seconds so you do not miss

important calls.

Weather Band Key — Scans

seven preprogrammed weather

frequencies to keep you informed

about current weather conditions.

Weather Alert — Automatically

sounds the alarm tone to advise of

hazardous weather conditions

when it detects the alert signal on

the local NOAA weather channel.

Lock-Out Function —Setthe

scanner to skip over specified

channels or frequencies when

scanning or searching.

Key Lock — Lock the scanner’s

keys to prevent accidentally

changing the scanner’s

programming.

Two Supplied Antennas with

BNC Connector — Select the

antenna that best meets your

needs. The supplied stub antenna

helps your scanner receive strong

local signals and makes the

scanner easy to carry and use at

events. The supplied flexible

antenna provides excellent

reception of weaker signals and is

designed to help prevent antenna

breakage.

Liquid Crystal Display — Makes

it easy to view and change

programming information.

CONTENTS

FCC Notice .................. 4

Scanning Legally ......... 4

Preparation .................. 6

Installing Batteries . 6

Using AC Power .... 7

Using Vehicle Battery

Power ..................... 8

Charging Recharge-

able Batteries ......... 9

Connecting an

Antenna ................. 9

Connecting Earphone/

Headphones ........ 11

Listening Safely ... 12

Traffic Safety ........ 12

Connecting an

Extension Speaker 13

Understanding the

Scanner ..................... 13

A Look at the

Keypad ................. 14

A Look at the

Display ................. 16

Understanding Banks 19

Channel Storage

Banks ................... 19

Service Banks ...... 19

Monitor Memories 24

Operation ................... 25

TurningOnthe

Scanner/Setting

Volume and

Squelch ................ 25

Storing Known

Frequencies into

Channels .............. 25

Finding and Storing

Active Frequencies 26

Using Monitor

Memory ................ 30

Scanning the Stored

Channels .............. 31

Turning Channel

Storage Banks Off

and On ................. 31

Monitoring a Stored

Channel ............... 32

Clearing a Stored

Channel ............... 32

Clearing all Stored

Channels .............. 33

Clearing all Locked-

Out Channels ....... 33

Listeningtothe

Marine Bank ......... 33

Listeningtothe

Weather Band ...... 34

(continued)

Features

Display Backlight — Makes the

scanner easy to read in low light

situations.

Three Power Options —Power

the scanner from internal batteries

(non-rechargeable batteries,

rechargeable Ni-MH (nickel-metal

hydride) or regular or high-

capacity Ni-Cd (nickel-cadmium)

batteries), external AC power

(using optional adapters), or

vehicle battery power (using

optional adapters).

Thank you for purchasing the

RadioShack 200-Channel VHF/

Air/UHF/800 MHz Handheld Race

Scanner. It lets you in on all the

action in the pits or on the track at

the big race. This scanner gives

you direct access to over 33,500

frequencies, including those used

by participants and staff at auto

races,police and fire departments,

ambulance services, and amateur

radio services. You can select up

to 200 channels to scan, and you

can change your selection at any

time.

Your scanner can receive all of

these frequencies:

• 29–54 MHz

• 108–136.9875 MHz

• 137–174 MHz

• 380–512 MHz

• 806–823.9875 MHz

• 849–868.9875 MHz

• 894–960 MHz

This Owner’s Manual also

includes the section “A General

Guide to Scanning” on Page 52 to

Scanning at the Races 35

Storing a Car Number

and Frequency ..... 36

Adding Frequencies to

a Car Number ...... 37

Adding a Car Number

to the Channel ..... 38

Changing the Stored

Car Number ......... 38

Viewing Frequencies

Associated with a Car

Number ................ 39

Deleting a Frequency

from a Car Number 39

Scanning by Car

Number ................ 40

Finding Car Numbers

Associated with

Channels .............. 40

Special Features ........ 41

Delay .................... 41

Locking Out Channels

or Frequencies ..... 42

Using Priority ....... 44

Using Power Save 45

Using the Display

Backlight .............. 46

Turning the Key Tone

On and Off ........... 46

Using the Key Lock 47

Resetting/Initializing

the Scanner ......... 47

Wired/On-Air

Programming ............. 48

Using Wired

Programming ....... 49

Using On-Air

Programming ....... 50

A General Guide

to Scanning ............... 52

Guide to

Frequencies ......... 52

Guide to the Action

Bands ................... 54

Band Allocation .... 55

Care ........................... 65

Service and Repair .... 65

Troubleshooting ......... 66

Specifications ............ 67

Features

FCC Notice

help you target frequency ranges

inyourserviceareasoyoucan

search for a wide variety of

transmissions.

FCC NOTICE

Your scanner might cause TV or

radio interference even when it is

operating properly. To determine

whether your scanner is causing

the interference, turn off your

scanner. If the interference goes

away, your scanner is causing it.

Try to eliminate the interference

by:

• moving your scanner away

from the receiver

• connectingyourscannertoan

outlet that is on a different

electrical circuit from the

receiver

• contacting your local

RadioShack store for help

If you cannot eliminate the

interference,theFCCrequiresthat

you stop using your scanner.

This device complies with Part 15

of the FCC Rules. Operation is

subject to the following conditions:

(1) This device must not cause

harmful interference, and (2) this

device must accept any

interference received, including

interference that may cause

undesired operation. Ô

SCANNING

LEGALLY

Your scanner covers frequencies

used by many different groups

ÔNOTE Ô

Mobile use of this

scanner is unlawful or

requires a permit in

some areas. Check the

laws in your area.

Scanning Legally

including police and fire

departments, ambulance services,

government agencies, private

companies, amateur radio

services, military operations,

pager services, and wireline

(telephone and telegraph) service

providers. It is legal to listen to

almost every transmission your

scanner can receive. However,

there are some transmissions you

should never intentionally listen to.

These include:

• telephone conversations

(cellular, cordless, or other

private means of telephone

signal transmission)

• pager transmissions

• any scrambled or encrypted

transmissions

According to the Electronic

Communications Privacy Act

(ECPA), you are subject to fines

and possible imprisonment for

intentionally listening to, using, or

divulging the contents of such a

transmission unless you have the

consent of a party to the

communication (unless such

activity is otherwise illegal).

This scanner has been designed

to prevent reception of illegal

transmissions. This is done to

comply with the legal requirement

that scanners be manufactured so

as to not be easily modifiable to

pick up those transmissions. Do

not open your scanner’s case to

make any modifications that could

allow it to pick up transmissions

that it is not legal to listen to. Doing

Preparation

so could subject you to legal

penalties.

We encourage responsible, legal

scanner use.

PREPARATION

INSTALLING BATTERIES

You can power your scanner

with four AA batteries (not sup-

plied). Ô

You can use either the black non-

rechargeable battery holder or the

yellow rechargeable battery holder

(both supplied) to hold the

batteries. If you use the yellow

battery holder, we recommend

nickel-cadmium or nickel-metal

hydride batteries (not supplied).o

1. Press down on the battery

compartment cover then slide

the cover in the direction of

the arrow to remove it.

2. If you are using non-

rechargeable batteries, place

them into the black holder, as

indicated by the polarity

symbols (+ and –) marked on

the holder. Or, if you are using

rechargeable batteries, place

them into the yellow holder as

indicated by the polarity

symbols (+ and –) marked on

the holder.

3. Place the battery holder into

the battery compartment. 

4. Replace the cover.

ÔNOTES Ô

• Dispose of old

batteries promptly

and properly.

• Do not burn or bury

batteries.

• Use only fresh

batteries of the

required size and

recommended

type.

• Do not mix old and

new batteries,

different types of

batteries(standard,

alkaline, or

rechargeable), or

rechargeable

batteries of

different capacities.

• If you do not plan

to use the scanner

for a month or

more, remove the

batteries. Batteries

can leak chemicals

that can destroy

electronic parts.

oWARNING o

Never install non-

rechargeablebatteriesin

the yellow rechargeable

battery holder. Non-

rechargeable batteries

can get hot or explode if

you try to recharge

them.

CAUTION 

The battery holder fits

only one way inside the

battery compartment.

Do not force it.

Preparation

When flashes on the display

and the scanner beeps, or if the

scanner stops operating properly,

replace the batteries.

USING AC POWER

You can power the scanner using

a 9V, 300-mA AC adapter and a

size B Adaptaplugadapter

(neither supplied). Both are

available at your local RadioShack

store.

Cautions:

•You must use a

Class 2 power

source that supplies

9V DC and delivers at least

300 mA. Its center tip must be

settopositiveanditsplug

must fit the scanner's PWR

DC 9V jack. Using an adapter

that does not meet these

specifications could damage

the scanner or the adapter.

• Always connect the AC

adapter to the scanner before

you connect it to AC power.

When you finish, disconnect

the adapter from AC power

before you disconnect it from

the scanner.

To power the scanner using an AC

adapter, attach the Adaptaplug to

the AC adapter so the tip reads

positive (+), then insert the

Adaptaplug into the scanner’s

PWRDC9Vjack. Connect the

other end of the adapter to a

standard AC outlet.

Preparation

USING VEHICLE BATTERY

POWER

You can power the scanner from a

vehicle’s 12V power source (such

as a cigarette-lighter socket) using

a 9V, 300-mA DC adapter and a

size B Adaptaplug (neither

supplied). Both are available at

your local RadioShack store.

Cautions:

•You must use a

power source that

supplies regulated

9V DC and delivers at least

300 mA. Its center tip must be

settopositiveanditsplug

must fit the scanner's PWR

DC 9V jack. Using an adapter

that does not meet these

specifications could damage

the scanner or the adapter.

• Always connect the DC

adapter to the scanner before

you connect it to the power

source. When you finish,

disconnect the adapter from

the power source before you

disconnect it from the

scanner.

To power the scanner using a DC

adapter, attach the Adaptaplug to

the DC adapter so the tip reads

positive (+), set the adapter’s

voltage switch to 9V, then insert

the Adaptaplug into the scanner’s

PWRDC9Vjack. Plug the other

end of the DC adapter into your

vehicle’s cigarette-lighter socket.

ÔNOTE Ô

Ifyouuseacigarette-

lighter power cable and

your vehicle’s engine is

running, you might hear

electrical noise from the

engine while scanning.

This is normal.

Preparation

CHARGING

RECHARGEABLE

BATTERIES

Your scanner has a built-in

charging circuit that lets you

charge rechargeable batteries

while they are in the scanner. To

charge rechargeable batteries,

you need to use an AC adapter

which supplies 9V (RadioShack

Cat. No. 273-1767) or a DC

adapter which supplies 10V

(RadioShack Cat. No. 273-1830).

Connect a size B Adaptaplug to

the adapter’s cable with the tip set

to positive then insert the

Adaptaplug into the scanner’s

PWRDC9Vjack. Ô

It takes between 14 and 16 hours

to recharge Ni-MH or 7 and 8

hours to recharge Ni-Cd batteries

that are fully discharged. You can

operate the scanner while

recharging the batteries, but

charging takes longer. !

CONNECTING AN

ANTENNA

Connecting a Supplied

Antenna

You must install an antenna

before you can operate the

scanner.

The supplied stub antenna helps

your scanner receive most strong

transmissions at events and

makes the scanner easier to carry

and use. The supplied flexible

antenna provides slightly better

reception and helps your scanner

receive strong local signals.

ÔNOTE Ô

• Do not overcharge

Ni-Cd batteries.

Overcharging causes

them to get hot and

shortens their life.

• Ni-Cd batteries last

longer and deliver

more power if you

occasionally let them

fully discharge. To do

this, simply use the

scanner until

flashesonthedisplay

and the scanner

beeps. Then fully

charge the batteries.

!IMPORTANT !

The EPA

certified

RBRC®

Battery

Recycling

Seal on the nickel-

cadmium(Ni-Cd) battery

indicates RadioShack is

voluntarily participating

in an industry program

to collect and recycle

these batteries at the

end of their useful life,

when taken out of

service in the United

States or Canada. The

RBRC programprovides

a convenient alternative

to placing used Ni-Cd

batteries into the trash

or the municipal waste

stream, which may be

illegal in your area.

Please call 1-800-THE-

SHACK (1-800-843-

7422) for information on

Ni-Cd battery recycling

and disposal bans/

restrictions in your area.

RadioShack’s

involvement in this

program is part of the

company’s commitment

to preserving our

environment and

conserving our natural

resources.

Preparation

1. Align the slots around the

antenna’s connector with the

tabs on the antenna jack.

2. Press the antenna down over

the jack and turn the

antenna’s base clockwise

until it locks into place.

Connecting an Outdoor

Antenna

Instead ofa supplied antenna, you

can connect an outdoor base-

station or mobile antenna (not

supplied) to your scanner using a

BNC connector. Your local

RadioShack store sells a variety of

antennas. Choose the one that

best meets your needs.

When deciding on a mobile or

base-station antenna and its

location, consider these points:

• The antenna should be as

high as possible on the

vehicle or building.

• The antenna and its cable

should be as far as possible

from sources of electrical

noise, such as appliances or

other radios.

Andere Handbücher für PRO-89

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Radio Shack Scanner Handbücher

Radio Shack

Radio Shack PRO-2056 Bedienungsanleitung

Radio Shack

Radio Shack PRO-2053 Bedienungsanleitung

Radio Shack

Radio Shack PRO-2049 Bedienungsanleitung

Radio Shack

Radio Shack PRO-137 Bedienungsanleitung

Radio Shack

Radio Shack 25-3053 Bedienungsanleitung

Radio Shack

Radio Shack FU62ED Bedienungsanleitung

Radio Shack

Radio Shack PRO-528 Bedienungsanleitung

Radio Shack

Radio Shack 20-106 Bedienungsanleitung

Radio Shack

Radio Shack PRO-89 Bedienungsanleitung

Radio Shack

Radio Shack 20-427 PRO-2054 Bedienungsanleitung

Radio Shack

Radio Shack Race Scanner Bedienungsanleitung

Radio Shack

Radio Shack 20-136 Bedienungsanleitung

Radio Shack

Radio Shack PRO-2046 Bedienungsanleitung

Radio Shack

Radio Shack HANDHELD TRUNKING 20-521 Bedienungsanleitung

Radio Shack

Radio Shack PRO-83 Bedienungsanleitung

Radio Shack

Radio Shack PRO-528 Bedienungsanleitung

Radio Shack

Radio Shack PRO-106 Bedienungsanleitung

Radio Shack

Radio Shack Racing Scanner Bedienungsanleitung

Radio Shack

Radio Shack 20-405 Bedienungsanleitung

Radio Shack

Radio Shack PRO-26 Bedienungsanleitung

Radio Shack

Radio Shack PRO-162 Bedienungsanleitung

Radio Shack

Radio Shack Pro-60 Bedienungsanleitung

Radio Shack

Radio Shack PRO-2039 Bedienungsanleitung

Radio Shack

Radio Shack Pro-92 Bedienungsanleitung

Beliebte Scanner Handbücher anderer Marken

Plustek

Plustek Scanner Bedienungsanleitung

Z/I Imaging

Z/I Imaging PhotoScan 2001 Bedienungsanleitung

Renkforce

Renkforce DS100-5M Bedienungsanleitung

Image Access

Image Access WideTEK A2 Bedienungsanleitung

Canon

Canon imageFORMULA CR-120N Bedienungsanleitung

Fujitsu

Fujitsu FI-4860C2 Bedienungsanleitung

GeoSlam

GeoSlam ZEB Horizon Montageanleitung

Kodak

Kodak i5800 Scanner Bedienungsanleitung

Kodak

Kodak i7300 Bedienungsanleitung

Revopoint

Revopoint POP Bedienungsanleitung

Fujitsu

Fujitsu fi-4860C Bedienungsanleitung

Eddyfi Technologies

Eddyfi Technologies Floormap X Bedienungsanleitung

Faselase

Faselase F6 Bedienungsanleitung

Fujitsu

Fujitsu CardMinder Bedienungsanleitung

Uniden

Uniden BC340CRS Bedienungsanleitung

Infinite Peripherals

Infinite Peripherals INFINEA TAB M Bedienungsanleitung

Mustek

Mustek PageExpress 4800 Pro Bedienungsanleitung

Optex

Optex 750830 Bedienungsanleitung